Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/9] SoC and defconfig support for SAM9X60
@ 2019-11-29 13:51 Claudiu Beznea
  2019-11-29 13:51 ` [PATCH v3 1/9] ARM: at91: Kconfig: add sam9x60 pll config flag Claudiu Beznea
                   ` (9 more replies)
  0 siblings, 10 replies; 11+ messages in thread
From: Claudiu Beznea @ 2019-11-29 13:51 UTC (permalink / raw)
  To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
  Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea

Hi,

This series enables proper support for SAM9X60 in Kconfig and
defconfig.

Thank you,
Claudiu Beznea

Changes in v3:
- move patch "ARM: at91: Kconfig: add config flag for SAM9X60 SoC" before
  the patches that uses CONFIG_SOC_SAM9X60
- sqash defconfig patches (except the savedefconfig one)

Changes in v2:
- cahnged cover letter title; previously it was:
  "add defconfig support for SAM9X60"
- have new entry in arch/arm/mach-at91/Kconfig for SOC_SAM9X60
  independent of SOC_AT91SAM9 to be able to select only necessary
  config flags for SAM9X60 (patches 02/17, 03/17)
- select POWER_RESET_AT91_RESET and POWER_RESET_AT91_SAMA5D2_SHDWC
  as for SAMA5D2 (patches 04/17, 05/17)
- select DEBUG_AT91_RM9200_DBGU (patch 06/17)
- shaped a bit the patches titles and commit desciptions for defconfig
  patches (patches 09-17/17)

Claudiu Beznea (9):
  ARM: at91: Kconfig: add sam9x60 pll config flag
  ARM: at91: Kconfig: add config flag for SAM9X60 SoC
  ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
  drivers: soc: atmel: move sam9x60 under its own config flag
  power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
  drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60
  ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60
  ARM: at91/defconfig: use savedefconfig
  ARM: at91/defconfig: enable config flags for sam9x60 SoC

 arch/arm/Kconfig.debug             |  6 ++---
 arch/arm/configs/at91_dt_defconfig | 55 ++++++++++++++++++--------------------
 arch/arm/mach-at91/Kconfig         | 24 +++++++++++++++--
 arch/arm/mach-at91/Makefile        |  1 +
 arch/arm/mach-at91/at91sam9.c      | 18 -------------
 arch/arm/mach-at91/pm.c            |  2 +-
 arch/arm/mach-at91/sam9x60.c       | 34 +++++++++++++++++++++++
 drivers/power/reset/Kconfig        |  4 +--
 drivers/soc/atmel/soc.c            |  5 ++--
 9 files changed, 92 insertions(+), 57 deletions(-)
 create mode 100644 arch/arm/mach-at91/sam9x60.c

-- 
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-29 13:51 [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 1/9] ARM: at91: Kconfig: add sam9x60 pll config flag Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 2/9] ARM: at91: Kconfig: add config flag for SAM9X60 SoC Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 3/9] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 4/9] drivers: soc: atmel: move sam9x60 under its own " Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 5/9] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 6/9] drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC " Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 7/9] ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU " Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 8/9] ARM: at91/defconfig: use savedefconfig Claudiu Beznea
2019-11-29 13:51 ` [PATCH v3 9/9] ARM: at91/defconfig: enable config flags for sam9x60 SoC Claudiu Beznea
2019-12-09 23:45 ` [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Alexandre Belloni

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git