[PATCH v2 2/2] thermal: mediatek: add tsensor support for V2 thermal system

[Henry Yen <henry.yen@mediatek.com>]

This patch adds full support for ver 2 thermal system (e.g., MT7622 SoC).
The new changes include reading calibration data, converting temperature
and hardware initialization which are specific for version 2 system.
Each platform decides which function to call according to its version.

Fixes: 3966be3c08c3 ("thermal: mediatek: add support for MT7622 SoC")
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
---
 drivers/thermal/mtk_thermal.c | 132 ++++++++++++++++++++++++++++++++--
 1 file changed, 125 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 10107d9d56a8..88620f7e9890 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -38,6 +38,7 @@
 #define TEMP_MONIDET0		0x014
 #define TEMP_MONIDET1		0x018
 #define TEMP_MSRCTL0		0x038
+#define TEMP_MSRCTL1		0x03c
 #define TEMP_AHBPOLL		0x040
 #define TEMP_AHBTO		0x044
 #define TEMP_ADCPNP0		0x048
@@ -133,6 +134,20 @@
 #define CALIB_BUF0_O_SLOPE_SIGN_V1(x)	(((x) >> 7) & 0x1)
 #define CALIB_BUF1_ID_V1(x)		(((x) >> 9) & 0x1)
 
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT7622.
+ */
+#define CALIB_BUF0_ADC_OE_V2(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_ADC_GE_V2(x)		(((x) >> 12) & 0x3ff)
+#define CALIB_BUF0_DEGC_CALI_V2(x)	(((x) >> 6) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V2(x)	(((x) >> 0) & 0x3f)
+#define CALIB_BUF1_VTS_TS1_V2(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF1_VTS_TS2_V2(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF1_VTS_TSABB_V2(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF1_VALID_V2(x)		(((x) >> 4) & 0x1)
+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x)	(((x) >> 3) & 0x1)
+
 enum {
 	VTS1,
 	VTS2,
@@ -143,6 +158,11 @@ enum {
 	MAX_NUM_VTS,
 };
 
+enum mtk_thermal_version {
+	MTK_THERMAL_V1 = 1,
+	MTK_THERMAL_V2,
+};
+
 /* MT2701 thermal sensors */
 #define MT2701_TS1	0
 #define MT2701_TS2	1
@@ -245,6 +265,7 @@ struct mtk_thermal_data {
 	const int *controller_offset;
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
+	enum mtk_thermal_version version;
 };
 
 struct mtk_thermal {
@@ -258,8 +279,10 @@ struct mtk_thermal {
 
 	/* Calibration values */
 	s32 adc_ge;
+	s32 adc_oe;
 	s32 degc_cali;
 	s32 o_slope;
+	s32 o_slope_sign;
 	s32 vts[MAX_NUM_VTS];
 
 	const struct mtk_thermal_data *conf;
@@ -398,6 +421,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
 	.msr = mt8173_msr,
 	.adcpnp = mt8173_adcpnp,
 	.sensor_mux_values = mt8173_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /*
@@ -428,6 +452,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
 	.msr = mt2701_msr,
 	.adcpnp = mt2701_adcpnp,
 	.sensor_mux_values = mt2701_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /*
@@ -458,6 +483,7 @@ static const struct mtk_thermal_data mt2712_thermal_data = {
 	.msr = mt2712_msr,
 	.adcpnp = mt2712_adcpnp,
 	.sensor_mux_values = mt2712_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /*
@@ -482,6 +508,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.msr = mt7622_msr,
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
+	.version = MTK_THERMAL_V2,
 };
 
 /*
@@ -514,6 +541,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
 	.msr = mt8183_msr,
 	.adcpnp = mt8183_adcpnp,
 	.sensor_mux_values = mt8183_mux_values,
+	.version = MTK_THERMAL_V1,
 };
 
 /**
@@ -540,6 +568,36 @@ static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
 	return mt->degc_cali * 500 - tmp;
 }
 
+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+	s32 format_1 = 0;
+	s32 format_2 = 0;
+	s32 g_oe = 1;
+	s32 g_gain = 1;
+	s32 g_x_roomt = 0;
+	s32 tmp = 0;
+
+	if (raw == 0)
+		return 0;
+
+	raw &= 0xfff;
+	g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
+	g_oe = mt->adc_oe - 512;
+	format_1 = mt->vts[VTS2] + 3105 - g_oe;
+	format_2 = (mt->degc_cali * 10) >> 1;
+	g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
+
+	tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
+	tmp = tmp * 10 * 100 / 11;
+
+	if (mt->o_slope_sign == 0)
+		tmp = tmp / (165 - mt->o_slope);
+	else
+		tmp = tmp / (165 + mt->o_slope);
+
+	return (format_2 - tmp) * 100;
+}
+
 /**
  * mtk_thermal_get_bank - get bank
  * @bank:	The bank
@@ -594,9 +652,13 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 		raw = readl(mt->thermal_base +
 			    conf->msr[conf->bank_data[bank->id].sensors[i]]);
 
-		temp = raw_to_mcelsius_v1(mt,
-					  conf->bank_data[bank->id].sensors[i],
-					  raw);
+		if (mt->conf->version == MTK_THERMAL_V1) {
+			temp = raw_to_mcelsius_v1(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		} else {
+			temp = raw_to_mcelsius_v2(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		}
 
 		/*
 		 * The first read of a sensor often contains very high bogus
@@ -698,9 +760,11 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 	writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
 	       controller_base + TEMP_ADCMUXADDR);
 
-	/* AHB address for pnp sensor mux selection */
-	writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
-	       controller_base + TEMP_PNPMUXADDR);
+	if (mt->conf->version == MTK_THERMAL_V1) {
+		/* AHB address for pnp sensor mux selection */
+		writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
+		       controller_base + TEMP_PNPMUXADDR);
+	}
 
 	/* AHB value for auxadc enable */
 	writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
@@ -803,6 +867,23 @@ static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
 	return 0;
 }
 
+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
+{
+	if (!CALIB_BUF1_VALID_V2(buf[1]))
+		return -EINVAL;
+
+	mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
+	mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
+	mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
+	mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
+	mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
+	mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
+	mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
+
+	return 0;
+}
+
 static int mtk_thermal_get_calibration_data(struct device *dev,
 					    struct mtk_thermal *mt)
 {
@@ -838,8 +919,15 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
 		goto out;
 	}
 
-	if (mtk_thermal_extract_efuse_v1(mt, buf))
+	if (mt->conf->version == MTK_THERMAL_V1)
+		ret = mtk_thermal_extract_efuse_v1(mt, buf);
+	else
+		ret = mtk_thermal_extract_efuse_v2(mt, buf);
+
+	if (ret) {
 		dev_info(dev, "Device not calibrated, using default calibration values\n");
+		ret = 0;
+	}
 
 out:
 	kfree(buf);
@@ -872,6 +960,28 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+{
+	int tmp;
+
+	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
+	tmp &= ~(0x37);
+	tmp |= 0x1;
+	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	udelay(200);
+}
+
+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
+					    void __iomem *auxadc_base)
+{
+	int tmp;
+
+	writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
+	writel(0x1, mt->thermal_base + TEMP_MONCTL0);
+	tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
+	writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
+}
+
 static int mtk_thermal_probe(struct platform_device *pdev)
 {
 	int ret, i, ctrl_id;
@@ -880,6 +990,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 	struct resource *res;
 	u64 auxadc_phys_base, apmixed_phys_base;
 	struct thermal_zone_device *tzdev;
+	void __iomem *apmixed_base, *auxadc_base;
 
 	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
 	if (!mt)
@@ -914,6 +1025,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	auxadc_base = of_iomap(auxadc, 0);
 	auxadc_phys_base = of_get_phys_base(auxadc);
 
 	of_node_put(auxadc);
@@ -929,6 +1041,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	apmixed_base = of_iomap(apmixedsys, 0);
 	apmixed_phys_base = of_get_phys_base(apmixedsys);
 
 	of_node_put(apmixedsys);
@@ -954,6 +1067,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
+	if (mt->conf->version == MTK_THERMAL_V2) {
+		mtk_thermal_turn_on_buffer(apmixed_base);
+		mtk_thermal_release_periodic_ts(mt, auxadc_base);
+	}
+
 	for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
 		for (i = 0; i < mt->conf->num_banks; i++)
 			mtk_thermal_init_bank(mt, i, apmixed_phys_base,
-- 
2.17.1