Terve Mikko,

On Wed, Oct 15, 2014 at 01:05:19PM +0300, Mikko Perttunen wrote:
> Eduardo: ping
> 


I had no objections with the driver at this point. Neither with the DT
part. I decided to include it in my -linus queue, which means, it will
hopefully be queued in the next major merge windown (v3.19).

I also merged it to my -next branch, for linux-next testing.


> Cheers,
> Mikko
> 
> On 09/29/2014 05:17 PM, Mikko Perttunen wrote:
> > From: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

BTW, this nvidia address is bouncing. I noticed because my automated
'I applied it on queue xyz' notification message has returned.

> >
> > This adds support for the Tegra SOCTHERM thermal sensing and management
> > system found in the Tegra124 system-on-chip. This initial driver supports
> > temperature polling for four thermal zones.
> >
> > Signed-off-by: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> > ---
> > v7: bunch of style fixes
> >
> >   drivers/thermal/Kconfig          |  10 +
> >   drivers/thermal/Makefile         |   1 +
> >   drivers/thermal/tegra_soctherm.c | 473 +++++++++++++++++++++++++++++++++++++++
> >   3 files changed, 484 insertions(+)
> >   create mode 100644 drivers/thermal/tegra_soctherm.c
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 693208e..fd9d049 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -175,6 +175,16 @@ config ARMADA_THERMAL
> >   	  Enable this option if you want to have support for thermal management
> >   	  controller present in Armada 370 and Armada XP SoC.
> >
> > +config TEGRA_SOCTHERM
> > +	tristate "Tegra SOCTHERM thermal management"
> > +	depends on ARCH_TEGRA
> > +	help
> > +	  Enable this option for integrated thermal management support on NVIDIA
> > +	  Tegra124 systems-on-chip. The driver supports four thermal zones
> > +	  (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
> > +	  zones to manage temperatures. This option is also required for the
> > +	  emergency thermal reset (thermtrip) feature to function.
> > +
> >   config DB8500_CPUFREQ_COOLING
> >   	tristate "DB8500 cpufreq cooling"
> >   	depends on ARCH_U8500
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index 31e232f..f0b94d5 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -33,3 +33,4 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
> >   obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
> >   obj-$(CONFIG_ACPI_INT3403_THERMAL)	+= int3403_thermal.o
> >   obj-$(CONFIG_ST_THERMAL)	+= st/
> > +obj-$(CONFIG_TEGRA_SOCTHERM)	+= tegra_soctherm.o
> > diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra_soctherm.c
> > new file mode 100644
> > index 0000000..70f7e9e
> > --- /dev/null
> > +++ b/drivers/thermal/tegra_soctherm.c
> > @@ -0,0 +1,473 @@
> > +/*
> > + * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
> > + *
> > + * Author:
> > + *	Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> > + *

Might be time to send a patch on top of my -linus queue to update the
above with a valid email address.

Thanks,

> > + * This software is licensed under the terms of the GNU General Public
> > + * License version 2, as published by the Free Software Foundation, and
> > + * may be copied, distributed, and modified under those terms.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/reset.h>
> > +#include <linux/thermal.h>
> > +
> > +#include <soc/tegra/fuse.h>
> > +
> > +#define SENSOR_CONFIG0				0
> > +#define SENSOR_CONFIG0_STOP			BIT(0)
> > +#define SENSOR_CONFIG0_TALL_SHIFT		8
> > +#define SENSOR_CONFIG0_TCALC_OVER		BIT(4)
> > +#define SENSOR_CONFIG0_OVER			BIT(3)
> > +#define SENSOR_CONFIG0_CPTR_OVER		BIT(2)
> > +
> > +#define SENSOR_CONFIG1				4
> > +#define SENSOR_CONFIG1_TSAMPLE_SHIFT		0
> > +#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT		15
> > +#define SENSOR_CONFIG1_TEN_COUNT_SHIFT		24
> > +#define SENSOR_CONFIG1_TEMP_ENABLE		BIT(31)
> > +
> > +#define SENSOR_CONFIG2				8
> > +#define SENSOR_CONFIG2_THERMA_SHIFT		16
> > +#define SENSOR_CONFIG2_THERMB_SHIFT		0
> > +
> > +#define SENSOR_PDIV				0x1c0
> > +#define SENSOR_PDIV_T124			0x8888
> > +#define SENSOR_HOTSPOT_OFF			0x1c4
> > +#define SENSOR_HOTSPOT_OFF_T124			0x00060600
> > +#define SENSOR_TEMP1				0x1c8
> > +#define SENSOR_TEMP2				0x1cc
> > +
> > +#define SENSOR_TEMP_MASK			0xffff
> > +#define READBACK_VALUE_MASK			0xff00
> > +#define READBACK_VALUE_SHIFT			8
> > +#define READBACK_ADD_HALF			BIT(7)
> > +#define READBACK_NEGATE				BIT(1)
> > +
> > +#define FUSE_TSENSOR8_CALIB			0x180
> > +#define FUSE_SPARE_REALIGNMENT_REG_0		0x1fc
> > +
> > +#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK	0x1fff
> > +#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK	(0x1fff << 13)
> > +#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT	13
> > +
> > +#define FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK	0x3ff
> > +#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK	(0x7ff << 10)
> > +#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT	10
> > +
> > +#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_CP_MASK 0x3f
> > +#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK (0x1f << 21)
> > +#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT 21
> > +
> > +#define NOMINAL_CALIB_FT_T124			105
> > +#define NOMINAL_CALIB_CP_T124			25
> > +
> > +struct tegra_tsensor_configuration {
> > +	u32 tall, tsample, tiddq_en, ten_count, pdiv, tsample_ate, pdiv_ate;
> > +};
> > +
> > +struct tegra_tsensor {
> > +	const struct tegra_tsensor_configuration *config;
> > +	u32 base, calib_fuse_offset;
> > +	/* Correction values used to modify values read from calibration fuses */
> > +	s32 fuse_corr_alpha, fuse_corr_beta;
> > +};
> > +
> > +struct tegra_thermctl_zone {
> > +	void __iomem *reg;
> > +	unsigned int shift;
> > +};
> > +
> > +static const struct tegra_tsensor_configuration t124_tsensor_config = {
> > +	.tall = 16300,
> > +	.tsample = 120,
> > +	.tiddq_en = 1,
> > +	.ten_count = 1,
> > +	.pdiv = 8,
> > +	.tsample_ate = 480,
> > +	.pdiv_ate = 8
> > +};
> > +
> > +static const struct tegra_tsensor t124_tsensors[] = {
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0xc0,
> > +		.calib_fuse_offset = 0x098,
> > +		.fuse_corr_alpha = 1135400,
> > +		.fuse_corr_beta = -6266900,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0xe0,
> > +		.calib_fuse_offset = 0x084,
> > +		.fuse_corr_alpha = 1122220,
> > +		.fuse_corr_beta = -5700700,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0x100,
> > +		.calib_fuse_offset = 0x088,
> > +		.fuse_corr_alpha = 1127000,
> > +		.fuse_corr_beta = -6768200,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0x120,
> > +		.calib_fuse_offset = 0x12c,
> > +		.fuse_corr_alpha = 1110900,
> > +		.fuse_corr_beta = -6232000,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0x140,
> > +		.calib_fuse_offset = 0x158,
> > +		.fuse_corr_alpha = 1122300,
> > +		.fuse_corr_beta = -5936400,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0x160,
> > +		.calib_fuse_offset = 0x15c,
> > +		.fuse_corr_alpha = 1145700,
> > +		.fuse_corr_beta = -7124600,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0x180,
> > +		.calib_fuse_offset = 0x154,
> > +		.fuse_corr_alpha = 1120100,
> > +		.fuse_corr_beta = -6000500,
> > +	},
> > +	{
> > +		.config = &t124_tsensor_config,
> > +		.base = 0x1a0,
> > +		.calib_fuse_offset = 0x160,
> > +		.fuse_corr_alpha = 1106500,
> > +		.fuse_corr_beta = -6729300,
> > +	},
> > +};
> > +
> > +struct tegra_soctherm {
> > +	struct reset_control *reset;
> > +	struct clk *clock_tsensor;
> > +	struct clk *clock_soctherm;
> > +	void __iomem *regs;
> > +
> > +	struct thermal_zone_device *thermctl_tzs[4];
> > +};
> > +
> > +struct tsensor_shared_calibration {
> > +	u32 base_cp, base_ft;
> > +	u32 actual_temp_cp, actual_temp_ft;
> > +};
> > +
> > +static int calculate_shared_calibration(struct tsensor_shared_calibration *r)
> > +{
> > +	u32 val, shifted_cp, shifted_ft;
> > +	int err;
> > +
> > +	err = tegra_fuse_readl(FUSE_TSENSOR8_CALIB, &val);
> > +	if (err)
> > +		return err;
> > +	r->base_cp = val & FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK;
> > +	r->base_ft = (val & FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK)
> > +		>> FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT;
> > +	val = ((val & FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK)
> > +		>> FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT);
> > +	shifted_ft = sign_extend32(val, 4);
> > +
> > +	err = tegra_fuse_readl(FUSE_SPARE_REALIGNMENT_REG_0, &val);
> > +	if (err)
> > +		return err;
> > +	shifted_cp = sign_extend32(val, 5);
> > +
> > +	r->actual_temp_cp = 2 * NOMINAL_CALIB_CP_T124 + shifted_cp;
> > +	r->actual_temp_ft = 2 * NOMINAL_CALIB_FT_T124 + shifted_ft;
> > +
> > +	return 0;
> > +}
> > +
> > +static s64 div64_s64_precise(s64 a, s64 b)
> > +{
> > +	s64 r, al;
> > +
> > +	/* Scale up for increased precision division */
> > +	al = a << 16;
> > +
> > +	r = div64_s64(al * 2 + 1, 2 * b);
> > +	return r >> 16;
> > +}
> > +
> > +static int
> > +calculate_tsensor_calibration(const struct tegra_tsensor *sensor,
> > +			      const struct tsensor_shared_calibration *shared,
> > +			      u32 *calib)
> > +{
> > +	u32 val;
> > +	s32 actual_tsensor_ft, actual_tsensor_cp, delta_sens, delta_temp,
> > +	    mult, div;
> > +	s16 therma, thermb;
> > +	s64 tmp;
> > +	int err;
> > +
> > +	err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
> > +	if (err)
> > +		return err;
> > +
> > +	actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
> > +	val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK)
> > +		>> FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
> > +	actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
> > +
> > +	delta_sens = actual_tsensor_ft - actual_tsensor_cp;
> > +	delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
> > +
> > +	mult = sensor->config->pdiv * sensor->config->tsample_ate;
> > +	div = sensor->config->tsample * sensor->config->pdiv_ate;
> > +
> > +	therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult,
> > +				   (s64) delta_sens * div);
> > +
> > +	tmp = (s64)actual_tsensor_ft * shared->actual_temp_cp -
> > +	      (s64)actual_tsensor_cp * shared->actual_temp_ft;
> > +	thermb = div64_s64_precise(tmp, (s64)delta_sens);
> > +
> > +	therma = div64_s64_precise((s64)therma * sensor->fuse_corr_alpha,
> > +				   (s64)1000000LL);
> > +	thermb = div64_s64_precise((s64)thermb * sensor->fuse_corr_alpha +
> > +				   sensor->fuse_corr_beta, (s64)1000000LL);
> > +
> > +	*calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
> > +		 ((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
> > +
> > +	return 0;
> > +}
> > +
> > +static int enable_tsensor(struct tegra_soctherm *tegra,
> > +			  const struct tegra_tsensor *sensor,
> > +			  const struct tsensor_shared_calibration *shared)
> > +{
> > +	void __iomem *base = tegra->regs + sensor->base;
> > +	unsigned int val;
> > +	u32 calib;
> > +	int err;
> > +
> > +	err = calculate_tsensor_calibration(sensor, shared, &calib);
> > +	if (err)
> > +		return err;
> > +
> > +	val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
> > +	writel(val, base + SENSOR_CONFIG0);
> > +
> > +	val  = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
> > +	val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
> > +	val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
> > +	val |= SENSOR_CONFIG1_TEMP_ENABLE;
> > +	writel(val, base + SENSOR_CONFIG1);
> > +
> > +	writel(calib, base + SENSOR_CONFIG2);
> > +
> > +	return 0;
> > +}
> > +
> > +/*
> > + * Translate from soctherm readback format to millicelsius.
> > + * The soctherm readback format in bits is as follows:
> > + *   TTTTTTTT H______N
> > + * where T's contain the temperature in Celsius,
> > + * H denotes an addition of 0.5 Celsius and N denotes negation
> > + * of the final value.
> > + */
> > +static long translate_temp(u16 val)
> > +{
> > +	long t;
> > +
> > +	t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
> > +	if (val & READBACK_ADD_HALF)
> > +		t += 500;
> > +	if (val & READBACK_NEGATE)
> > +		t *= -1;
> > +
> > +	return t;
> > +}
> > +
> > +static int tegra_thermctl_get_temp(void *data, long *out_temp)
> > +{
> > +	struct tegra_thermctl_zone *zone = data;
> > +	u32 val;
> > +
> > +	val = (readl(zone->reg) >> zone->shift) & SENSOR_TEMP_MASK;
> > +	*out_temp = translate_temp(val);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id tegra_soctherm_of_match[] = {
> > +	{ .compatible = "nvidia,tegra124-soctherm" },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
> > +
> > +struct thermctl_zone_desc {
> > +	unsigned int offset;
> > +	unsigned int shift;
> > +};
> > +
> > +static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = {
> > +	{ SENSOR_TEMP1, 16 },
> > +	{ SENSOR_TEMP2, 16 },
> > +	{ SENSOR_TEMP1, 0 },
> > +	{ SENSOR_TEMP2, 0 }
> > +};
> > +
> > +static int tegra_soctherm_probe(struct platform_device *pdev)
> > +{
> > +	struct tegra_soctherm *tegra;
> > +	struct thermal_zone_device *tz;
> > +	struct tsensor_shared_calibration shared_calib;
> > +	struct resource *res;
> > +	unsigned int i;
> > +	int err;
> > +
> > +	const struct tegra_tsensor *tsensors = t124_tsensors;
> > +
> > +	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
> > +	if (!tegra)
> > +		return -ENOMEM;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	tegra->regs = devm_ioremap_resource(&pdev->dev, res);
> > +	if (IS_ERR(tegra->regs))
> > +		return PTR_ERR(tegra->regs);
> > +
> > +	tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
> > +	if (IS_ERR(tegra->reset)) {
> > +		dev_err(&pdev->dev, "can't get soctherm reset\n");
> > +		return PTR_ERR(tegra->reset);
> > +	}
> > +
> > +	tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
> > +	if (IS_ERR(tegra->clock_tsensor)) {
> > +		dev_err(&pdev->dev, "can't get tsensor clock\n");
> > +		return PTR_ERR(tegra->clock_tsensor);
> > +	}
> > +
> > +	tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
> > +	if (IS_ERR(tegra->clock_soctherm)) {
> > +		dev_err(&pdev->dev, "can't get soctherm clock\n");
> > +		return PTR_ERR(tegra->clock_soctherm);
> > +	}
> > +
> > +	reset_control_assert(tegra->reset);
> > +
> > +	err = clk_prepare_enable(tegra->clock_soctherm);
> > +	if (err)
> > +		return err;
> > +
> > +	err = clk_prepare_enable(tegra->clock_tsensor);
> > +	if (err) {
> > +		clk_disable_unprepare(tegra->clock_soctherm);
> > +		return err;
> > +	}
> > +
> > +	reset_control_deassert(tegra->reset);
> > +
> > +	/* Initialize raw sensors */
> > +
> > +	err = calculate_shared_calibration(&shared_calib);
> > +	if (err)
> > +		goto disable_clocks;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(t124_tsensors); ++i) {
> > +		err = enable_tsensor(tegra, tsensors + i, &shared_calib);
> > +		if (err)
> > +			goto disable_clocks;
> > +	}
> > +
> > +	writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
> > +	writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
> > +
> > +	/* Initialize thermctl sensors */
> > +
> > +	for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
> > +		struct tegra_thermctl_zone *zone =
> > +			devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
> > +		if (!zone) {
> > +			err = -ENOMEM;
> > +			goto unregister_tzs;
> > +		}
> > +
> > +		zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset;
> > +		zone->shift = t124_thermctl_temp_zones[i].shift;
> > +
> > +		tz = thermal_zone_of_sensor_register(&pdev->dev, i, zone,
> > +						     tegra_thermctl_get_temp,
> > +						     NULL);
> > +		if (IS_ERR(tz)) {
> > +			err = PTR_ERR(tz);
> > +			dev_err(&pdev->dev, "failed to register sensor: %d\n",
> > +				err);
> > +			goto unregister_tzs;
> > +		}
> > +
> > +		tegra->thermctl_tzs[i] = tz;
> > +	}
> > +
> > +	return 0;
> > +
> > +unregister_tzs:
> > +	while (i--)
> > +		thermal_zone_of_sensor_unregister(&pdev->dev,
> > +						  tegra->thermctl_tzs[i]);
> > +
> > +disable_clocks:
> > +	clk_disable_unprepare(tegra->clock_tsensor);
> > +	clk_disable_unprepare(tegra->clock_soctherm);
> > +
> > +	return err;
> > +}
> > +
> > +static int tegra_soctherm_remove(struct platform_device *pdev)
> > +{
> > +	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
> > +		thermal_zone_of_sensor_unregister(&pdev->dev,
> > +						  tegra->thermctl_tzs[i]);
> > +	}
> > +
> > +	clk_disable_unprepare(tegra->clock_tsensor);
> > +	clk_disable_unprepare(tegra->clock_soctherm);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct platform_driver tegra_soctherm_driver = {
> > +	.probe = tegra_soctherm_probe,
> > +	.remove = tegra_soctherm_remove,
> > +	.driver = {
> > +		.name = "tegra-soctherm",
> > +		.of_match_table = tegra_soctherm_of_match,
> > +	},
> > +};
> > +module_platform_driver(tegra_soctherm_driver);
> > +
> > +MODULE_AUTHOR("Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>");
> > +MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
> > +MODULE_LICENSE("GPL v2");
> >
>