Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
  2019-05-15 10:47 [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Han Nandor
  2019-05-15 10:47 ` Han Nandor
@ 2019-05-15 10:47 ` " Han Nandor
  2019-05-15 10:47   ` Han Nandor
  2019-05-15 10:47 ` [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode Han Nandor
  2019-06-27 18:33 ` [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Sebastian Reichel
  3 siblings, 1 reply; 9+ messages in thread
From: Han Nandor @ 2019-05-15 10:47 UTC (permalink / raw)
  To: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree; +Cc: Han Nandor

Add a new reboot mode write interface that is using an NVMEM cell
to store the reboot mode magic.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
---
 drivers/power/reset/Kconfig             |  9 +++
 drivers/power/reset/Makefile            |  1 +
 drivers/power/reset/nvmem-reboot-mode.c | 76 +++++++++++++++++++++++++
 3 files changed, 86 insertions(+)
 create mode 100644 drivers/power/reset/nvmem-reboot-mode.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6533aa560aa1..bb4a4e854f96 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -245,5 +245,14 @@ config POWER_RESET_SC27XX
 	  PMICs includes the SC2720, SC2721, SC2723, SC2730
 	  and SC2731 chips.
 
+config NVMEM_REBOOT_MODE
+	tristate "Generic NVMEM reboot mode driver"
+	select REBOOT_MODE
+	help
+	  Say y here will enable reboot mode driver. This will
+	  get reboot mode arguments and store it in a NVMEM cell,
+	  then the bootloader can read it and take different
+	  action according to the mode.
+
 endif
 
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0aebee954ac1..85da3198e4e0 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
 obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
 obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
 obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
+obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o
diff --git a/drivers/power/reset/nvmem-reboot-mode.c b/drivers/power/reset/nvmem-reboot-mode.c
new file mode 100644
index 000000000000..e229308d43e2
--- /dev/null
+++ b/drivers/power/reset/nvmem-reboot-mode.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Vaisala Oyj. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/platform_device.h>
+#include <linux/reboot-mode.h>
+
+struct nvmem_reboot_mode {
+	struct reboot_mode_driver reboot;
+	struct nvmem_cell *cell;
+};
+
+static int nvmem_reboot_mode_write(struct reboot_mode_driver *reboot,
+				    unsigned int magic)
+{
+	int ret;
+	struct nvmem_reboot_mode *nvmem_rbm;
+
+	nvmem_rbm = container_of(reboot, struct nvmem_reboot_mode, reboot);
+
+	ret = nvmem_cell_write(nvmem_rbm->cell, &magic, sizeof(magic));
+	if (ret < 0)
+		dev_err(reboot->dev, "update reboot mode bits failed\n");
+
+	return ret;
+}
+
+static int nvmem_reboot_mode_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct nvmem_reboot_mode *nvmem_rbm;
+
+	nvmem_rbm = devm_kzalloc(&pdev->dev, sizeof(*nvmem_rbm), GFP_KERNEL);
+	if (!nvmem_rbm)
+		return -ENOMEM;
+
+	nvmem_rbm->reboot.dev = &pdev->dev;
+	nvmem_rbm->reboot.write = nvmem_reboot_mode_write;
+
+	nvmem_rbm->cell = devm_nvmem_cell_get(&pdev->dev, "reboot-mode");
+	if (IS_ERR(nvmem_rbm->cell)) {
+		dev_err(&pdev->dev, "failed to get the nvmem cell reboot-mode\n");
+		return PTR_ERR(nvmem_rbm->cell);
+	}
+
+	ret = devm_reboot_mode_register(&pdev->dev, &nvmem_rbm->reboot);
+	if (ret)
+		dev_err(&pdev->dev, "can't register reboot mode\n");
+
+	return ret;
+}
+
+static const struct of_device_id nvmem_reboot_mode_of_match[] = {
+	{ .compatible = "nvmem-reboot-mode" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nvmem_reboot_mode_of_match);
+
+static struct platform_driver nvmem_reboot_mode_driver = {
+	.probe = nvmem_reboot_mode_probe,
+	.driver = {
+		.name = "nvmem-reboot-mode",
+		.of_match_table = nvmem_reboot_mode_of_match,
+	},
+};
+module_platform_driver(nvmem_reboot_mode_driver);
+
+MODULE_AUTHOR("Nandor Han <nandor.han@vaisala.com>");
+MODULE_DESCRIPTION("NVMEM reboot mode driver");
+MODULE_LICENSE("GPL");
-- 
2.17.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 0/2] Use NVMEM as reboot-mode write interface
@ 2019-05-15 10:47 Han Nandor
  2019-05-15 10:47 ` Han Nandor
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Han Nandor @ 2019-05-15 10:47 UTC (permalink / raw)
  To: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree; +Cc: Han Nandor

Description
-----------
Extend the reboot mode driver to use a NVMEM cell as writing interface.

Testing
-------
The testing is done by configuring DT from a custom board.
The NVMEM cell is configured in an RTC non-volatile memory.
Kernel: 4.14.60 (the patchset was rebased on kernel master)

DT configurations:
`
...
reboot-mode-nvmem@0 {
    compatible = "simple-mfd";
    reboot-mode {
        compatible = "nvmem-reboot-mode";
        nvmem-cells = <&reboot_mode>;
        nvmem-cell-names = "reboot-mode";

        mode-test       = <0x21969147>;
    };
};
...
reboot_mode: nvmem_reboot_mode@0 {
        reg = <0x00 0x4>;
};
...
`

1. Reboot the system using the command `reboot test`

2. Verify that kernel logs show that reboot was done in mode `test`:
PASS
`[  413.957172] reboot: Restarting system with command 'test' `

3. Stop in U-Boot and verify that mode `test` magic value is present
in RTCs non-volatile memory: PASS

Kernel: 5.1.0-rc3

1. Configure `arch/arm/configs/imx_v6_v7_defconfig` to contain 
`CONFIG_NVMEM_REBOOT_MODE=y`
2. Verify that Kernel compiles successful: PASS
`
make ARCH=arm CROSS_COMPILE=arm-linux-gnu- imx_v6_v7_defconfig zImage
...
CC      drivers/power/reset/nvmem-reboot-mode.o
...
Kernel: arch/arm/boot/zImage is ready
`
Changes since v1:
-----------------
 - split the documentation on a separate patch
 - add a missing header

Changes since v2:
----------------
 - change the module license to GPL since GPL v2 is deprecated

Changes since v3:
----------------
 - documentation updated according to the comments

Nandor Han (2):
  power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write
    interface
  dt-bindings: power: reset: add document for NVMEM based reboot-mode

 .../power/reset/nvmem-reboot-mode.txt         | 26 +++++++
 drivers/power/reset/Kconfig                   |  9 +++
 drivers/power/reset/Makefile                  |  1 +
 drivers/power/reset/nvmem-reboot-mode.c       | 76 +++++++++++++++++++
 4 files changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
 create mode 100644 drivers/power/reset/nvmem-reboot-mode.c

-- 
2.17.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 0/2] Use NVMEM as reboot-mode write interface
  2019-05-15 10:47 [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Han Nandor
@ 2019-05-15 10:47 ` Han Nandor
  2019-05-15 10:47 ` [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode " Han Nandor
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 9+ messages in thread
From: Han Nandor @ 2019-05-15 10:47 UTC (permalink / raw)
  To: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree; +Cc: Han Nandor

Description
-----------
Extend the reboot mode driver to use a NVMEM cell as writing interface.

Testing
-------
The testing is done by configuring DT from a custom board.
The NVMEM cell is configured in an RTC non-volatile memory.
Kernel: 4.14.60 (the patchset was rebased on kernel master)

DT configurations:
`
...
reboot-mode-nvmem@0 {
    compatible = "simple-mfd";
    reboot-mode {
        compatible = "nvmem-reboot-mode";
        nvmem-cells = <&reboot_mode>;
        nvmem-cell-names = "reboot-mode";

        mode-test       = <0x21969147>;
    };
};
...
reboot_mode: nvmem_reboot_mode@0 {
        reg = <0x00 0x4>;
};
...
`

1. Reboot the system using the command `reboot test`

2. Verify that kernel logs show that reboot was done in mode `test`:
PASS
`[  413.957172] reboot: Restarting system with command 'test' `

3. Stop in U-Boot and verify that mode `test` magic value is present
in RTCs non-volatile memory: PASS

Kernel: 5.1.0-rc3

1. Configure `arch/arm/configs/imx_v6_v7_defconfig` to contain 
`CONFIG_NVMEM_REBOOT_MODE=y`
2. Verify that Kernel compiles successful: PASS
`
make ARCH=arm CROSS_COMPILE=arm-linux-gnu- imx_v6_v7_defconfig zImage
...
CC      drivers/power/reset/nvmem-reboot-mode.o
...
Kernel: arch/arm/boot/zImage is ready
`
Changes since v1:
-----------------
 - split the documentation on a separate patch
 - add a missing header

Changes since v2:
----------------
 - change the module license to GPL since GPL v2 is deprecated

Changes since v3:
----------------
 - documentation updated according to the comments

Nandor Han (2):
  power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write
    interface
  dt-bindings: power: reset: add document for NVMEM based reboot-mode

 .../power/reset/nvmem-reboot-mode.txt         | 26 +++++++
 drivers/power/reset/Kconfig                   |  9 +++
 drivers/power/reset/Makefile                  |  1 +
 drivers/power/reset/nvmem-reboot-mode.c       | 76 +++++++++++++++++++
 4 files changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
 create mode 100644 drivers/power/reset/nvmem-reboot-mode.c

-- 
2.17.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
  2019-05-15 10:47 ` [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode " Han Nandor
@ 2019-05-15 10:47   ` Han Nandor
  0 siblings, 0 replies; 9+ messages in thread
From: Han Nandor @ 2019-05-15 10:47 UTC (permalink / raw)
  To: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree; +Cc: Han Nandor

Add a new reboot mode write interface that is using an NVMEM cell
to store the reboot mode magic.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
---
 drivers/power/reset/Kconfig             |  9 +++
 drivers/power/reset/Makefile            |  1 +
 drivers/power/reset/nvmem-reboot-mode.c | 76 +++++++++++++++++++++++++
 3 files changed, 86 insertions(+)
 create mode 100644 drivers/power/reset/nvmem-reboot-mode.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6533aa560aa1..bb4a4e854f96 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -245,5 +245,14 @@ config POWER_RESET_SC27XX
 	  PMICs includes the SC2720, SC2721, SC2723, SC2730
 	  and SC2731 chips.
 
+config NVMEM_REBOOT_MODE
+	tristate "Generic NVMEM reboot mode driver"
+	select REBOOT_MODE
+	help
+	  Say y here will enable reboot mode driver. This will
+	  get reboot mode arguments and store it in a NVMEM cell,
+	  then the bootloader can read it and take different
+	  action according to the mode.
+
 endif
 
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0aebee954ac1..85da3198e4e0 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
 obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
 obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
 obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
+obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o
diff --git a/drivers/power/reset/nvmem-reboot-mode.c b/drivers/power/reset/nvmem-reboot-mode.c
new file mode 100644
index 000000000000..e229308d43e2
--- /dev/null
+++ b/drivers/power/reset/nvmem-reboot-mode.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Vaisala Oyj. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/platform_device.h>
+#include <linux/reboot-mode.h>
+
+struct nvmem_reboot_mode {
+	struct reboot_mode_driver reboot;
+	struct nvmem_cell *cell;
+};
+
+static int nvmem_reboot_mode_write(struct reboot_mode_driver *reboot,
+				    unsigned int magic)
+{
+	int ret;
+	struct nvmem_reboot_mode *nvmem_rbm;
+
+	nvmem_rbm = container_of(reboot, struct nvmem_reboot_mode, reboot);
+
+	ret = nvmem_cell_write(nvmem_rbm->cell, &magic, sizeof(magic));
+	if (ret < 0)
+		dev_err(reboot->dev, "update reboot mode bits failed\n");
+
+	return ret;
+}
+
+static int nvmem_reboot_mode_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct nvmem_reboot_mode *nvmem_rbm;
+
+	nvmem_rbm = devm_kzalloc(&pdev->dev, sizeof(*nvmem_rbm), GFP_KERNEL);
+	if (!nvmem_rbm)
+		return -ENOMEM;
+
+	nvmem_rbm->reboot.dev = &pdev->dev;
+	nvmem_rbm->reboot.write = nvmem_reboot_mode_write;
+
+	nvmem_rbm->cell = devm_nvmem_cell_get(&pdev->dev, "reboot-mode");
+	if (IS_ERR(nvmem_rbm->cell)) {
+		dev_err(&pdev->dev, "failed to get the nvmem cell reboot-mode\n");
+		return PTR_ERR(nvmem_rbm->cell);
+	}
+
+	ret = devm_reboot_mode_register(&pdev->dev, &nvmem_rbm->reboot);
+	if (ret)
+		dev_err(&pdev->dev, "can't register reboot mode\n");
+
+	return ret;
+}
+
+static const struct of_device_id nvmem_reboot_mode_of_match[] = {
+	{ .compatible = "nvmem-reboot-mode" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nvmem_reboot_mode_of_match);
+
+static struct platform_driver nvmem_reboot_mode_driver = {
+	.probe = nvmem_reboot_mode_probe,
+	.driver = {
+		.name = "nvmem-reboot-mode",
+		.of_match_table = nvmem_reboot_mode_of_match,
+	},
+};
+module_platform_driver(nvmem_reboot_mode_driver);
+
+MODULE_AUTHOR("Nandor Han <nandor.han@vaisala.com>");
+MODULE_DESCRIPTION("NVMEM reboot mode driver");
+MODULE_LICENSE("GPL");
-- 
2.17.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode
  2019-05-15 10:47 [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Han Nandor
  2019-05-15 10:47 ` Han Nandor
  2019-05-15 10:47 ` [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode " Han Nandor
@ 2019-05-15 10:47 ` Han Nandor
  2019-05-15 10:47   ` Han Nandor
  2019-06-13 21:02   ` Rob Herring
  2019-06-27 18:33 ` [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Sebastian Reichel
  3 siblings, 2 replies; 9+ messages in thread
From: Han Nandor @ 2019-05-15 10:47 UTC (permalink / raw)
  To: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree; +Cc: Han Nandor

Add the device tree bindings document for the NVMEM based reboot-mode
driver.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
---
 .../power/reset/nvmem-reboot-mode.txt         | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt

diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
new file mode 100644
index 000000000000..752d6126d5da
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
@@ -0,0 +1,26 @@
+NVMEM reboot mode driver
+
+This driver gets reboot mode magic value from reboot-mode driver
+and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
+can read it and take different action according to the magic
+value stored.
+
+Required properties:
+- compatible: should be "nvmem-reboot-mode".
+- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
+- nvmem-cell-names: Should be "reboot-mode".
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_mode>;
+		nvmem-cell-names = "reboot-mode";
+
+		mode-normal     = <0xAAAA5501>;
+		mode-bootloader = <0xBBBB5500>;
+		mode-recovery   = <0xCCCC5502>;
+		mode-test       = <0xDDDD5503>;
+	};
-- 
2.17.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode
  2019-05-15 10:47 ` [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode Han Nandor
@ 2019-05-15 10:47   ` Han Nandor
  2019-06-13 21:02   ` Rob Herring
  1 sibling, 0 replies; 9+ messages in thread
From: Han Nandor @ 2019-05-15 10:47 UTC (permalink / raw)
  To: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree; +Cc: Han Nandor

Add the device tree bindings document for the NVMEM based reboot-mode
driver.

Signed-off-by: Nandor Han <nandor.han@vaisala.com>
---
 .../power/reset/nvmem-reboot-mode.txt         | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt

diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
new file mode 100644
index 000000000000..752d6126d5da
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
@@ -0,0 +1,26 @@
+NVMEM reboot mode driver
+
+This driver gets reboot mode magic value from reboot-mode driver
+and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
+can read it and take different action according to the magic
+value stored.
+
+Required properties:
+- compatible: should be "nvmem-reboot-mode".
+- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
+- nvmem-cell-names: Should be "reboot-mode".
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_mode>;
+		nvmem-cell-names = "reboot-mode";
+
+		mode-normal     = <0xAAAA5501>;
+		mode-bootloader = <0xBBBB5500>;
+		mode-recovery   = <0xCCCC5502>;
+		mode-test       = <0xDDDD5503>;
+	};
-- 
2.17.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode
  2019-05-15 10:47 ` [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode Han Nandor
  2019-05-15 10:47   ` Han Nandor
@ 2019-06-13 21:02   ` Rob Herring
  1 sibling, 0 replies; 9+ messages in thread
From: Rob Herring @ 2019-06-13 21:02 UTC (permalink / raw)
  To: Han Nandor
  Cc: sre, linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree,
	Han Nandor

On Wed, 15 May 2019 10:47:15 +0000, Han Nandor wrote:
> Add the device tree bindings document for the NVMEM based reboot-mode
> driver.
> 
> Signed-off-by: Nandor Han <nandor.han@vaisala.com>
> ---
>  .../power/reset/nvmem-reboot-mode.txt         | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 0/2] Use NVMEM as reboot-mode write interface
  2019-05-15 10:47 [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Han Nandor
                   ` (2 preceding siblings ...)
  2019-05-15 10:47 ` [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode Han Nandor
@ 2019-06-27 18:33 ` Sebastian Reichel
  2019-06-28  4:49   ` Nandor Han
  3 siblings, 1 reply; 9+ messages in thread
From: Sebastian Reichel @ 2019-06-27 18:33 UTC (permalink / raw)
  To: Han Nandor; +Cc: linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree

[-- Attachment #1: Type: text/plain, Size: 1938 bytes --]

Hi,

On Wed, May 15, 2019 at 10:47:14AM +0000, Han Nandor wrote:
> Description
> -----------
> Extend the reboot mode driver to use a NVMEM cell as writing interface.
> 
> Testing
> -------
> The testing is done by configuring DT from a custom board.
> The NVMEM cell is configured in an RTC non-volatile memory.
> Kernel: 4.14.60 (the patchset was rebased on kernel master)
> 
> DT configurations:
> `
> ...
> reboot-mode-nvmem@0 {
>     compatible = "simple-mfd";
>     reboot-mode {
>         compatible = "nvmem-reboot-mode";
>         nvmem-cells = <&reboot_mode>;
>         nvmem-cell-names = "reboot-mode";
> 
>         mode-test       = <0x21969147>;
>     };
> };
> ...
> reboot_mode: nvmem_reboot_mode@0 {
>         reg = <0x00 0x4>;
> };
> ...
> `
> 
> 1. Reboot the system using the command `reboot test`
> 
> 2. Verify that kernel logs show that reboot was done in mode `test`:
> PASS
> `[  413.957172] reboot: Restarting system with command 'test' `
> 
> 3. Stop in U-Boot and verify that mode `test` magic value is present
> in RTCs non-volatile memory: PASS
> 
> Kernel: 5.1.0-rc3
> 
> 1. Configure `arch/arm/configs/imx_v6_v7_defconfig` to contain 
> `CONFIG_NVMEM_REBOOT_MODE=y`
> 2. Verify that Kernel compiles successful: PASS
> `
> make ARCH=arm CROSS_COMPILE=arm-linux-gnu- imx_v6_v7_defconfig zImage
> ...
> CC      drivers/power/reset/nvmem-reboot-mode.o
> ...
> Kernel: arch/arm/boot/zImage is ready
> `
> Changes since v1:
> -----------------
>  - split the documentation on a separate patch
>  - add a missing header
> 
> Changes since v2:
> ----------------
>  - change the module license to GPL since GPL v2 is deprecated
> 
> Changes since v3:
> ----------------
>  - documentation updated according to the comments

Thanks, queued. Please fix your git/mail setup, I had to fix the
line endings (\r\n -> \n) to apply this.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 0/2] Use NVMEM as reboot-mode write interface
  2019-06-27 18:33 ` [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Sebastian Reichel
@ 2019-06-28  4:49   ` Nandor Han
  0 siblings, 0 replies; 9+ messages in thread
From: Nandor Han @ 2019-06-28  4:49 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: linux-pm, linux-kernel, robh+dt, mark.rutland, devicetree

Hi,

>> Changes since v3:
>> ----------------
>>   - documentation updated according to the comments
> 
> Thanks, queued. Please fix your git/mail setup, I had to fix the
> line endings (\r\n -> \n) to apply this.
> 
> -- Sebastian
> 

Ok. Thanks Sebastian.

--
Nandor

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-15 10:47 [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Han Nandor
2019-05-15 10:47 ` Han Nandor
2019-05-15 10:47 ` [PATCH v4 1/2] power: reset: nvmem-reboot-mode: use NVMEM as reboot mode " Han Nandor
2019-05-15 10:47   ` Han Nandor
2019-05-15 10:47 ` [PATCH v4 2/2] dt-bindings: power: reset: add document for NVMEM based reboot-mode Han Nandor
2019-05-15 10:47   ` Han Nandor
2019-06-13 21:02   ` Rob Herring
2019-06-27 18:33 ` [PATCH v4 0/2] Use NVMEM as reboot-mode write interface Sebastian Reichel
2019-06-28  4:49   ` Nandor Han

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox