Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-pm@vger.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Lucas Stach <l.stach@pengutronix.de>,
	Chris Healy <cphealy@gmail.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Angus Ainslie <angus@akkea.ca>,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH v6 08/12] thermal: qoriq: Convert driver to use regmap API
Date: Mon, 17 Jun 2019 09:14:54 -0700
Message-ID: <20190617161458.3754-9-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190617161458.3754-1-andrew.smirnov@gmail.com>

Convert driver to use regmap API, drop custom LE/BE IO helpers and
simplify bit manipulation using regmap_update_bits(). This also allows
us to convert some register initialization to use loops and adds
convenient debug access to TMU registers via debugfs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 159 +++++++++++++++-----------------
 1 file changed, 74 insertions(+), 85 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 80fe9adcc313..08167ebe6060 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -8,6 +8,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
@@ -17,48 +18,27 @@
 /*
  * QorIQ TMU Registers
  */
-struct qoriq_tmu_site_regs {
-	u32 tritsr;		/* Immediate Temperature Site Register */
-	u32 tratsr;		/* Average Temperature Site Register */
-	u8 res0[0x8];
-};
 
-struct qoriq_tmu_regs {
-	u32 tmr;		/* Mode Register */
+#define REGS_TMR	0x000	/* Mode Register */
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
-	u32 tsr;		/* Status Register */
-	u32 tmtmir;		/* Temperature measurement interval Register */
+
+#define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
-	u8 res0[0x14];
-	u32 tier;		/* Interrupt Enable Register */
+
+#define REGS_TIER	0x020	/* Interrupt Enable Register */
 #define TIER_DISABLE	0x0
-	u32 tidr;		/* Interrupt Detect Register */
-	u32 tiscr;		/* Interrupt Site Capture Register */
-	u32 ticscr;		/* Interrupt Critical Site Capture Register */
-	u8 res1[0x10];
-	u32 tmhtcrh;		/* High Temperature Capture Register */
-	u32 tmhtcrl;		/* Low Temperature Capture Register */
-	u8 res2[0x8];
-	u32 tmhtitr;		/* High Temperature Immediate Threshold */
-	u32 tmhtatr;		/* High Temperature Average Threshold */
-	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
-	u8 res3[0x24];
-	u32 ttcfgr;		/* Temperature Configuration Register */
-	u32 tscfgr;		/* Sensor Configuration Register */
-	u8 res4[0x78];
-	struct qoriq_tmu_site_regs site[SITES_MAX];
-	u8 res5[0x9f8];
-	u32 ipbrr0;		/* IP Block Revision Register 0 */
-	u32 ipbrr1;		/* IP Block Revision Register 1 */
-	u8 res6[0x310];
-	u32 ttr0cr;		/* Temperature Range 0 Control Register */
-	u32 ttr1cr;		/* Temperature Range 1 Control Register */
-	u32 ttr2cr;		/* Temperature Range 2 Control Register */
-	u32 ttr3cr;		/* Temperature Range 3 Control Register */
-};
 
+#define REGS_TTCFGR	0x080	/* Temperature Configuration Register */
+#define REGS_TSCFGR	0x084	/* Sensor Configuration Register */
+
+#define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
+					    * Site Register
+					    */
+#define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
+					   * Control Register
+					   */
 /*
  * Thermal zone data
  */
@@ -67,8 +47,7 @@ struct qoriq_sensor {
 };
 
 struct qoriq_tmu_data {
-	struct qoriq_tmu_regs __iomem *regs;
-	bool little_endian;
+	struct regmap *regmap;
 	struct qoriq_sensor	sensor[SITES_MAX];
 };
 
@@ -77,29 +56,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
 	return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
 }
 
-static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
-{
-	if (p->little_endian)
-		iowrite32(val, addr);
-	else
-		iowrite32be(val, addr);
-}
-
-static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
-{
-	if (p->little_endian)
-		return ioread32(addr);
-	else
-		return ioread32be(addr);
-}
-
 static int tmu_get_temp(void *p, int *temp)
 {
 	struct qoriq_sensor *qsensor = p;
 	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
 
-	val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
+	regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
 	*temp = (val & 0xff) * 1000;
 
 	return 0;
@@ -135,7 +98,8 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 
 	/* Enable monitoring */
 	if (sites != 0)
-		tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+		regmap_write(qdata->regmap, REGS_TMR,
+			     sites | TMR_ME | TMR_ALPF);
 
 	return 0;
 }
@@ -154,10 +118,8 @@ static int qoriq_tmu_calibration(struct device *dev,
 	}
 
 	/* Init temperature range registers */
-	tmu_write(data, range[0], &data->regs->ttr0cr);
-	tmu_write(data, range[1], &data->regs->ttr1cr);
-	tmu_write(data, range[2], &data->regs->ttr2cr);
-	tmu_write(data, range[3], &data->regs->ttr3cr);
+	for (i = 0; i < ARRAY_SIZE(range); i++)
+		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
@@ -167,9 +129,9 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	for (i = 0; i < len; i += 8, calibration += 2) {
 		val = of_read_number(calibration, 1);
-		tmu_write(data, val, &data->regs->ttcfgr);
+		regmap_write(data->regmap, REGS_TTCFGR, val);
 		val = of_read_number(calibration + 1, 1);
-		tmu_write(data, val, &data->regs->tscfgr);
+		regmap_write(data->regmap, REGS_TSCFGR, val);
 	}
 
 	return 0;
@@ -178,15 +140,32 @@ static int qoriq_tmu_calibration(struct device *dev,
 static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 {
 	/* Disable interrupt, using polling instead */
-	tmu_write(data, TIER_DISABLE, &data->regs->tier);
+	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
 
 	/* Set update_interval */
-	tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+	regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 }
 
+static const struct regmap_range qoriq_yes_ranges[] = {
+	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
+	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
+	/* Read only registers below */
+	regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
+};
+
+static const struct regmap_access_table qoriq_wr_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges) - 1,
+};
+
+static const struct regmap_access_table qoriq_rd_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges),
+};
+
 static int qoriq_tmu_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -194,26 +173,44 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct resource *io;
+	const bool little_endian = of_property_read_bool(np, "little-endian");
+	const enum regmap_endian format_endian =
+		little_endian ? REGMAP_ENDIAN_LITTLE : REGMAP_ENDIAN_BIG;
+	const struct regmap_config regmap_config = {
+		.reg_bits		= 32,
+		.val_bits		= 32,
+		.reg_stride		= 4,
+		.rd_table		= &qoriq_rd_table,
+		.wr_table		= &qoriq_wr_table,
+		.val_format_endian	= format_endian,
+		.max_register		= SZ_4K,
+	};
+	void __iomem *base;
 
 	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	data->little_endian = of_property_read_bool(np, "little-endian");
-
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!io) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
 	}
 
-	data->regs = devm_ioremap(dev, io->start, resource_size(io));
-	if (!data->regs) {
+	base = devm_ioremap(dev, io->start, resource_size(io));
+	if (!base) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
 	}
 
+	data->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
 	qoriq_tmu_init_device(data);	/* TMU initialization */
 
 	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
@@ -236,7 +233,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -244,30 +241,22 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int qoriq_tmu_suspend(struct device *dev)
+
+static int qoriq_tmu_suspend_resume(struct device *dev, unsigned int val)
 {
-	u32 tmr;
 	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
 
-	/* Disable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr &= ~TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
+	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, val);
+}
 
-	return 0;
+static int qoriq_tmu_suspend(struct device *dev)
+{
+	return qoriq_tmu_suspend_resume(dev, 0);
 }
 
 static int qoriq_tmu_resume(struct device *dev)
 {
-	u32 tmr;
-	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
-
-	/* Enable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr |= TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
-
-	return 0;
+	return qoriq_tmu_suspend_resume(dev, TMR_ME);
 }
 #endif
 
-- 
2.21.0


  parent reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-17 16:14 [PATCH v6 00/12] QorIQ TMU multi-sensor and HWMON support Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 01/12] thermal: qoriq: Add local struct device pointer Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 02/12] thermal: qoriq: Don't store struct thermal_zone_device reference Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 03/12] thermal: qoriq: Add local struct qoriq_sensor pointer Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 04/12] thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 07/12] thermal: qoriq: Convert driver to use devm_ioremap() Andrey Smirnov
2019-06-17 16:14 ` Andrey Smirnov [this message]
2019-06-17 16:14 ` [PATCH v6 09/12] thermal: qoriq: Enable all sensors before registering them Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 10/12] thermal: qoriq: Do not report invalid temperature reading Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() Andrey Smirnov
2019-06-17 16:14 ` [PATCH v6 12/12] thermal: qoriq: Add hwmon support Andrey Smirnov
2019-08-12 18:09 ` [PATCH v6 00/12] QorIQ TMU multi-sensor and HWMON support Andrey Smirnov

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190617161458.3754-9-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=angus@akkea.ca \
    --cc=cphealy@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=edubezval@gmail.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox