Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/3] nvme: add thermal zone devices
@ 2019-06-13 15:20 Akinobu Mita
  2019-06-13 15:20 ` [PATCH v4 1/3] nvme: Export get and set features Akinobu Mita
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Akinobu Mita @ 2019-06-13 15:20 UTC (permalink / raw)
  To: linux-nvme, linux-pm
  Cc: Akinobu Mita, Zhang Rui, Eduardo Valentin, Daniel Lezcano,
	Keith Busch, Jens Axboe, Christoph Hellwig, Sagi Grimberg,
	Minwoo Im, Kenneth Heitke, Chaitanya Kulkarni

The NVMe controller reports up to nine temperature values in the SMART /
Health log page (the composite temperature and temperature sensor 1 through
temperature sensor 8).
The temperature threshold feature (Feature Identifier 04h) configures the
asynchronous event request command to complete when the temperature is
crossed its corresponding temperature threshold.

This provides these temperatures and thresholds via thermal zone devices.

The main purpose of this is to turn on a fan when overheated without
polling the device for the smart log that could prevent the lower power
state transitions.

In addition to the standard thermal zone device, this also adds support for
registering the DT thermal zone device. (This is currently untested, but
I plan to get a SBC with PCIe to test with DT)

* v4
- add thermal.c to hold thermal zone related code
- add 'use_thermal_zone' module parameter
- add CONFIG_THERMAL_WRITABLE_TRIPS dependency
- add comment about the return value of nvme_thermal_zones_register()
- support DT thermal zone device.
- use bitmap to iterate over implemented sensors

* v3
- Change the type name of thermal zone devices from 'nvme_temp<sensor>' to
  'nvme<instance>_temp<sensor>'
- Pass a NULL to the status argument of nvme_set_feature()
- Change the name of symbolic link from 'nvme_temp<sensor>' to 'temp<sensor>'
- Don't make it fatal error if the device provides a response
- Don't register thermal zone for composite temperature if smart log reports
  zero value
- Move the thermal zones registration and unregistration into the core module.

* v2
- s/correspoinding/corresponding/ typo in commit log
- Borrowed nvme_get_features() from Keith's patch
- Temperature threshold notification is splitted into another patch
- Change the data type of 'sensor' to unsigned
- Add BUILD_BUG_ON for the array size of tzdev member in nvme_ctrl
- Add WARN_ON_ONCE for paranoid checks
- Fix off-by-one error in nvme_get_temp
- Validate 'sensor' where the value is actually used
- Define and utilize two enums related to the temperature threshold feature
- Remove hysteresis value for this trip point and don't utilize the under
  temperature threshold
- Print error message for thermal_zone_device_register() failure
- Add function comments for nvme_thermal_zones_{,un}register
- Suppress non-fatal errors from nvme_thermal_zones_register()
- Add comment about implemented temperature sensors 
- Instead of creating a new 'thermal_work', append async smart event's
  action to the existing async_event_work
- Add comment for tzdev member in nvme_ctrl
- Call nvme_thermal_zones_unregister() earlier than the last reference
  release

Akinobu Mita (2):
  nvme: add thermal zone devices
  nvme: notify thermal framework when temperature threshold events occur

Keith Busch (1):
  nvme: Export get and set features

 drivers/nvme/host/Kconfig   |   1 +
 drivers/nvme/host/Makefile  |   1 +
 drivers/nvme/host/core.c    |  43 +++++-
 drivers/nvme/host/nvme.h    |  46 +++++++
 drivers/nvme/host/thermal.c | 323 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/nvme.h        |  12 ++
 6 files changed, 423 insertions(+), 3 deletions(-)
 create mode 100644 drivers/nvme/host/thermal.c

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Kenneth Heitke <kenneth.heitke@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
-- 
2.7.4


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 1/3] nvme: Export get and set features
  2019-06-13 15:20 [PATCH v4 0/3] nvme: add thermal zone devices Akinobu Mita
@ 2019-06-13 15:20 ` Akinobu Mita
  2019-06-13 15:20 ` [PATCH v4 2/3] nvme: add thermal zone devices Akinobu Mita
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 9+ messages in thread
From: Akinobu Mita @ 2019-06-13 15:20 UTC (permalink / raw)
  To: linux-nvme, linux-pm; +Cc: Keith Busch, Akinobu Mita

From: Keith Busch <keith.busch@intel.com>

Future use intends to make use of both, so export these functions. And
since their implementation is identical except for the opcode, provide a
new function that implement both.

[akinobu.mita@gmail.com>: fix line over 80 characters]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
---
 drivers/nvme/host/core.c | 24 +++++++++++++++++++++---
 drivers/nvme/host/nvme.h |  6 ++++++
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 120fb59..7e3c786 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1113,15 +1113,15 @@ static struct nvme_id_ns *nvme_identify_ns(struct nvme_ctrl *ctrl,
 	return id;
 }
 
-static int nvme_set_features(struct nvme_ctrl *dev, unsigned fid, unsigned dword11,
-		      void *buffer, size_t buflen, u32 *result)
+static int nvme_features(struct nvme_ctrl *dev, u8 op, unsigned int fid,
+		unsigned int dword11, void *buffer, size_t buflen, u32 *result)
 {
 	struct nvme_command c;
 	union nvme_result res;
 	int ret;
 
 	memset(&c, 0, sizeof(c));
-	c.features.opcode = nvme_admin_set_features;
+	c.features.opcode = op;
 	c.features.fid = cpu_to_le32(fid);
 	c.features.dword11 = cpu_to_le32(dword11);
 
@@ -1132,6 +1132,24 @@ static int nvme_set_features(struct nvme_ctrl *dev, unsigned fid, unsigned dword
 	return ret;
 }
 
+int nvme_set_features(struct nvme_ctrl *dev, unsigned int fid,
+		      unsigned int dword11, void *buffer, size_t buflen,
+		      u32 *result)
+{
+	return nvme_features(dev, nvme_admin_set_features, fid, dword11, buffer,
+			     buflen, result);
+}
+EXPORT_SYMBOL_GPL(nvme_set_features);
+
+int nvme_get_features(struct nvme_ctrl *dev, unsigned int fid,
+		      unsigned int dword11, void *buffer, size_t buflen,
+		      u32 *result)
+{
+	return nvme_features(dev, nvme_admin_get_features, fid, dword11, buffer,
+			     buflen, result);
+}
+EXPORT_SYMBOL_GPL(nvme_get_features);
+
 int nvme_set_queue_count(struct nvme_ctrl *ctrl, int *count)
 {
 	u32 q_count = (*count - 1) | ((*count - 1) << 16);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 55553d2..038b893 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -459,6 +459,12 @@ int __nvme_submit_sync_cmd(struct request_queue *q, struct nvme_command *cmd,
 		union nvme_result *result, void *buffer, unsigned bufflen,
 		unsigned timeout, int qid, int at_head,
 		blk_mq_req_flags_t flags, bool poll);
+int nvme_set_features(struct nvme_ctrl *dev, unsigned int fid,
+		      unsigned int dword11, void *buffer, size_t buflen,
+		      u32 *result);
+int nvme_get_features(struct nvme_ctrl *dev, unsigned int fid,
+		      unsigned int dword11, void *buffer, size_t buflen,
+		      u32 *result);
 int nvme_set_queue_count(struct nvme_ctrl *ctrl, int *count);
 void nvme_stop_keep_alive(struct nvme_ctrl *ctrl);
 int nvme_reset_ctrl(struct nvme_ctrl *ctrl);
-- 
2.7.4


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 2/3] nvme: add thermal zone devices
  2019-06-13 15:20 [PATCH v4 0/3] nvme: add thermal zone devices Akinobu Mita
  2019-06-13 15:20 ` [PATCH v4 1/3] nvme: Export get and set features Akinobu Mita
@ 2019-06-13 15:20 ` Akinobu Mita
  2019-06-25 15:03   ` Zhang Rui
  2019-06-13 15:20 ` [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur Akinobu Mita
  2019-06-20  6:36 ` [PATCH v4 0/3] nvme: add thermal zone devices Christoph Hellwig
  3 siblings, 1 reply; 9+ messages in thread
From: Akinobu Mita @ 2019-06-13 15:20 UTC (permalink / raw)
  To: linux-nvme, linux-pm
  Cc: Akinobu Mita, Zhang Rui, Eduardo Valentin, Daniel Lezcano,
	Keith Busch, Jens Axboe, Christoph Hellwig, Sagi Grimberg,
	Minwoo Im, Kenneth Heitke, Chaitanya Kulkarni

The NVMe controller reports up to nine temperature values in the SMART /
Health log page (the composite temperature and temperature sensor 1 through
temperature sensor 8).

This provides these temperatures via thermal zone devices.

Once the controller is identified, the thermal zone devices are created for
all implemented temperature sensors including the composite temperature.

/sys/class/thermal/thermal_zone[0-*]:
    |---type: 'nvme<instance>-temp<sensor>'
    |---temp: Temperature
    |---trip_point_0_temp: Over temperature threshold

The thermal_zone[0-*] contains a 'device' symlink to the corresponding nvme
device.

On the other hand, the following symlinks to the thermal zone devices are
created in the nvme device sysfs directory.

- temp0: Composite temperature
- temp1: Temperature sensor 1
...
- temp8: Temperature sensor 8

In addition to the standard thermal zone device, this also adds support for
registering the DT thermal zone device.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Kenneth Heitke <kenneth.heitke@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v4
- add thermal.c to hold thermal zone related code
- add 'use_thermal_zone' module parameter
- add CONFIG_THERMAL_WRITABLE_TRIPS dependency
- add comment about the return value of nvme_thermal_zones_register()
- support DT thermal zone device.
- use bitmap to iterate over implemented sensors

 drivers/nvme/host/Kconfig   |   1 +
 drivers/nvme/host/Makefile  |   1 +
 drivers/nvme/host/core.c    |   5 +
 drivers/nvme/host/nvme.h    |  35 +++++
 drivers/nvme/host/thermal.c | 311 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/nvme.h        |   5 +
 6 files changed, 358 insertions(+)
 create mode 100644 drivers/nvme/host/thermal.c

diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
index ec43ac9..90429f8 100644
--- a/drivers/nvme/host/Kconfig
+++ b/drivers/nvme/host/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config NVME_CORE
 	tristate
+	select THERMAL_WRITABLE_TRIPS if THERMAL
 
 config BLK_DEV_NVME
 	tristate "NVM Express block device"
diff --git a/drivers/nvme/host/Makefile b/drivers/nvme/host/Makefile
index 8a4b671..6018668 100644
--- a/drivers/nvme/host/Makefile
+++ b/drivers/nvme/host/Makefile
@@ -14,6 +14,7 @@ nvme-core-$(CONFIG_TRACING)		+= trace.o
 nvme-core-$(CONFIG_NVME_MULTIPATH)	+= multipath.o
 nvme-core-$(CONFIG_NVM)			+= lightnvm.o
 nvme-core-$(CONFIG_FAULT_INJECTION_DEBUG_FS)	+= fault_inject.o
+nvme-core-$(CONFIG_THERMAL)		+= thermal.o
 
 nvme-y					+= pci.o
 
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 7e3c786..4be339b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2696,6 +2696,10 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 	if (ret < 0)
 		return ret;
 
+	ret = nvme_thermal_zones_register(ctrl);
+	if (ret)
+		return ret;
+
 	ctrl->identified = true;
 
 	return 0;
@@ -3699,6 +3703,7 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)
 {
 	nvme_mpath_stop(ctrl);
 	nvme_stop_keep_alive(ctrl);
+	nvme_thermal_zones_unregister(ctrl);
 	flush_work(&ctrl->async_event_work);
 	cancel_work_sync(&ctrl->fw_act_work);
 }
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 038b893..a9c63ea 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -15,6 +15,7 @@
 #include <linux/sed-opal.h>
 #include <linux/fault-inject.h>
 #include <linux/rcupdate.h>
+#include <linux/thermal.h>
 
 extern unsigned int nvme_io_timeout;
 #define NVME_IO_TIMEOUT	(nvme_io_timeout * HZ)
@@ -146,6 +147,13 @@ enum nvme_ctrl_state {
 	NVME_CTRL_DEAD,
 };
 
+struct nvme_tz {
+	struct thermal_zone_params params;
+	struct thermal_zone_device *dev;
+	struct thermal_zone_device *of_dev;
+	unsigned int sensor;
+};
+
 struct nvme_ctrl {
 	bool comp_seen;
 	enum nvme_ctrl_state state;
@@ -247,6 +255,15 @@ struct nvme_ctrl {
 
 	struct page *discard_page;
 	unsigned long discard_page_busy;
+
+#ifdef CONFIG_THERMAL
+	/*
+	 * tz[0]: composite temperature
+	 * tz[1-8]: temperature sensor 1 through 8
+	 */
+	struct nvme_tz tz[9];
+	DECLARE_BITMAP(tz_enabled, 9);
+#endif
 };
 
 enum nvme_iopolicy {
@@ -584,4 +601,22 @@ static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
 	return dev_to_disk(dev)->private_data;
 }
 
+#ifdef CONFIG_THERMAL
+
+int nvme_thermal_zones_register(struct nvme_ctrl *ctrl);
+void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl);
+
+#else
+
+static inline int nvme_thermal_zones_register(struct nvme_ctrl *ctrl)
+{
+	return 0;
+}
+
+static inline void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
+{
+}
+
+#endif /* CONFIG_THERMAL */
+
 #endif /* _NVME_H */
diff --git a/drivers/nvme/host/thermal.c b/drivers/nvme/host/thermal.c
new file mode 100644
index 0000000..18d0e4c
--- /dev/null
+++ b/drivers/nvme/host/thermal.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/moduleparam.h>
+#include <asm/unaligned.h>
+
+#include "nvme.h"
+
+static bool use_thermal_zone = true;
+module_param(use_thermal_zone, bool, 0444);
+MODULE_PARM_DESC(use_thermal_zone,
+	"Export nvme temperature via generic thermal interface");
+
+static int nvme_get_temp(struct nvme_ctrl *ctrl, unsigned int sensor, int *temp)
+{
+	struct nvme_smart_log *log;
+	int ret;
+
+	BUILD_BUG_ON(ARRAY_SIZE(log->temp_sensor) + 1 != ARRAY_SIZE(ctrl->tz));
+
+	if (WARN_ON_ONCE(sensor > ARRAY_SIZE(log->temp_sensor)))
+		return -EINVAL;
+
+	log = kzalloc(sizeof(*log), GFP_KERNEL);
+	if (!log)
+		return -ENOMEM;
+
+	ret = nvme_get_log(ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0, log,
+			   sizeof(*log), 0);
+	if (ret) {
+		ret = ret > 0 ? -EINVAL : ret;
+		goto free_log;
+	}
+
+	if (sensor)
+		*temp = le16_to_cpu(log->temp_sensor[sensor - 1]);
+	else
+		*temp = get_unaligned_le16(log->temperature);
+
+free_log:
+	kfree(log);
+
+	return ret;
+}
+
+#define KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS((t) * 10)
+#define MILLICELSIUS_TO_KELVIN(t) ((MILLICELSIUS_TO_DECI_KELVIN(t) + 5) / 10)
+
+static int nvme_tz_of_get_temp(void *data, int *temp)
+{
+	struct nvme_tz *tz = data;
+	unsigned int sensor = tz->sensor;
+	struct nvme_ctrl *ctrl = container_of(tz, struct nvme_ctrl, tz[sensor]);
+	int ret;
+
+	ret = nvme_get_temp(ctrl, sensor, temp);
+	if (!ret)
+		*temp = KELVIN_TO_MILLICELSIUS(*temp);
+
+	return ret;
+}
+
+static int nvme_tz_get_temp(struct thermal_zone_device *tzdev, int *temp)
+{
+	return nvme_tz_of_get_temp(tzdev->devdata, temp);
+}
+
+static int nvme_tz_get_trip_type(struct thermal_zone_device *tzdev,
+				 int trip, enum thermal_trip_type *type)
+{
+	*type = THERMAL_TRIP_ACTIVE;
+
+	return 0;
+}
+
+static int nvme_get_over_temp_thresh(struct nvme_ctrl *ctrl,
+				     unsigned int sensor, int *temp)
+{
+	unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT;
+	int status;
+	int ret;
+
+	if (WARN_ON_ONCE(sensor >= ARRAY_SIZE(ctrl->tz)))
+		return -EINVAL;
+
+	ret = nvme_get_features(ctrl, NVME_FEAT_TEMP_THRESH, threshold, NULL, 0,
+				&status);
+	if (!ret)
+		*temp = status & NVME_TEMP_THRESH_MASK;
+
+	return ret > 0 ? -EINVAL : ret;
+}
+
+static int nvme_set_over_temp_thresh(struct nvme_ctrl *ctrl,
+				     unsigned int sensor, int temp)
+{
+	unsigned int threshold = sensor << NVME_TEMP_THRESH_SELECT_SHIFT;
+	int ret;
+
+	if (WARN_ON_ONCE(sensor >= ARRAY_SIZE(ctrl->tz)))
+		return -EINVAL;
+
+	if (temp > NVME_TEMP_THRESH_MASK)
+		return -EINVAL;
+
+	threshold |= temp & NVME_TEMP_THRESH_MASK;
+
+	ret = nvme_set_features(ctrl, NVME_FEAT_TEMP_THRESH, threshold, NULL, 0,
+				NULL);
+
+	return ret > 0 ? -EINVAL : ret;
+}
+
+static int nvme_tz_get_trip_temp(struct thermal_zone_device *tzdev,
+				 int trip, int *temp)
+{
+	struct nvme_tz *tz = tzdev->devdata;
+	unsigned int sensor = tz->sensor;
+	struct nvme_ctrl *ctrl = container_of(tz, struct nvme_ctrl, tz[sensor]);
+	int ret;
+
+	ret = nvme_get_over_temp_thresh(ctrl, sensor, temp);
+	if (!ret)
+		*temp = KELVIN_TO_MILLICELSIUS(*temp);
+
+	return ret;
+}
+
+static int nvme_tz_of_set_trip_temp(void *data, int trip, int temp)
+{
+	struct nvme_tz *tz = data;
+	unsigned int sensor = tz->sensor;
+	struct nvme_ctrl *ctrl = container_of(tz, struct nvme_ctrl, tz[sensor]);
+
+	temp = MILLICELSIUS_TO_KELVIN(temp);
+
+	return nvme_set_over_temp_thresh(ctrl, sensor, temp);
+}
+
+static int nvme_tz_set_trip_temp(struct thermal_zone_device *tzdev,
+				 int trip, int temp)
+{
+	return nvme_tz_of_set_trip_temp(tzdev->devdata, trip, temp);
+}
+
+static struct thermal_zone_device_ops nvme_tz_ops = {
+	.get_temp = nvme_tz_get_temp,
+	.get_trip_type = nvme_tz_get_trip_type,
+	.get_trip_temp = nvme_tz_get_trip_temp,
+	.set_trip_temp = nvme_tz_set_trip_temp,
+};
+
+static struct thermal_zone_of_device_ops nvme_tz_of_ops = {
+	.get_temp = nvme_tz_of_get_temp,
+	.set_trip_temp = nvme_tz_of_set_trip_temp,
+};
+
+static const struct thermal_zone_params nvme_tz_params = {
+	.governor_name = "user_space",
+	.no_hwmon = true,
+};
+
+static int nvme_thermal_zone_register(struct nvme_ctrl *ctrl,
+				      unsigned int sensor)
+{
+	struct thermal_zone_device *tzdev;
+	struct nvme_tz *tz = &ctrl->tz[sensor];
+	char name[THERMAL_NAME_LENGTH];
+	int ret;
+
+	tz->params = nvme_tz_params;
+	tz->sensor = sensor;
+	snprintf(name, sizeof(name), "nvme%d_temp%u", ctrl->instance, sensor);
+
+	tzdev = thermal_zone_device_register(name, 1, 1, tz, &nvme_tz_ops,
+					     &tz->params, 0, 0);
+	if (IS_ERR(tzdev)) {
+		dev_err(ctrl->device,
+			"Failed to register thermal zone device: %ld\n",
+			PTR_ERR(tzdev));
+		return PTR_ERR(tzdev);
+	}
+
+	tz->dev = tzdev;
+
+	snprintf(name, sizeof(name), "temp%d", sensor);
+	ret = sysfs_create_link(&ctrl->ctrl_device.kobj, &tz->dev->device.kobj,
+				name);
+	if (ret)
+		goto device_unregister;
+
+	ret = sysfs_create_link(&tz->dev->device.kobj,
+				&ctrl->ctrl_device.kobj, "device");
+	if (ret)
+		goto remove_sensor_link;
+
+	tzdev = thermal_zone_of_sensor_register(ctrl->dev, sensor, tz,
+						&nvme_tz_of_ops);
+	if (!IS_ERR(tzdev)) {
+		tz->of_dev = tzdev;
+	} else if (PTR_ERR(tzdev) != -ENODEV) {
+		ret = PTR_ERR(tzdev);
+		dev_err(ctrl->device,
+			"Failed to register thermal zone of sensor: %d\n", ret);
+		goto remove_device_link;
+	}
+
+	return 0;
+
+remove_device_link:
+	sysfs_remove_link(&tz->dev->device.kobj, "device");
+remove_sensor_link:
+	sysfs_remove_link(&ctrl->ctrl_device.kobj, name);
+device_unregister:
+	thermal_zone_device_unregister(tz->dev);
+	tz->dev = NULL;
+
+	return ret;
+}
+
+/**
+ * nvme_thermal_zones_register() - register nvme thermal zone devices
+ * @ctrl: controller instance
+ *
+ * This function creates up to nine thermal zone devices for all implemented
+ * temperature sensors including the composite temperature.
+ * Each thermal zone device provides a single trip point temperature that is
+ * associated with an over temperature threshold.
+ * A negative value is returned when the device doesn't respond to the host
+ * and won't be able to continue initialization.
+ */
+int nvme_thermal_zones_register(struct nvme_ctrl *ctrl)
+{
+	struct nvme_smart_log *log;
+	int ret = 0;
+	int err;
+	int i;
+
+	if (!use_thermal_zone)
+		return 0;
+
+	log = kzalloc(sizeof(*log), GFP_KERNEL);
+	if (!log)
+		return 0;
+
+	err = nvme_get_log(ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0, log,
+			   sizeof(*log), 0);
+	if (err) {
+		dev_err(ctrl->device, "Failed to get SMART log: %d\n", err);
+		/* If the device provided a response, then it's non-fatal */
+		ret = (err > 0) ? 0 : err;
+		goto out;
+	}
+
+	for_each_clear_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl->tz)) {
+		int temp;
+
+		if (i)
+			temp = le16_to_cpu(log->temp_sensor[i - 1]);
+		else
+			temp = get_unaligned_le16(log->temperature);
+
+		/*
+		 * All implemented temperature sensors report a non-zero value
+		 * in temperature sensor fields in the smart log page.
+		 */
+		if (!temp)
+			continue;
+
+		err = nvme_thermal_zone_register(ctrl, i);
+		if (err)
+			goto out;
+
+		__set_bit(i, ctrl->tz_enabled);
+	}
+out:
+	if (err)
+		nvme_thermal_zones_unregister(ctrl);
+
+	kfree(log);
+
+	return ret;
+}
+
+/**
+ * nvme_thermal_zones_unregister() - unregister nvme thermal zone devices
+ * @ctrl: controller instance
+ *
+ * This function removes the registered thermal zone devices and symlinks.
+ */
+void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
+{
+	int i;
+
+	for_each_set_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl->tz)) {
+		struct nvme_tz *tz = &ctrl->tz[i];
+		char name[20];
+
+		thermal_zone_of_sensor_unregister(ctrl->dev, tz->of_dev);
+		tz->of_dev = NULL;
+
+		sysfs_remove_link(&tz->dev->device.kobj, "device");
+
+		snprintf(name, sizeof(name), "temp%d", i);
+		sysfs_remove_link(&ctrl->ctrl_device.kobj, name);
+
+		thermal_zone_device_unregister(tz->dev);
+		tz->dev = NULL;
+
+		__clear_bit(i, ctrl->tz_enabled);
+	}
+}
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 8028ada..f29728b 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -749,6 +749,11 @@ struct nvme_write_zeroes_cmd {
 
 /* Features */
 
+enum {
+	NVME_TEMP_THRESH_MASK		= 0xffff,
+	NVME_TEMP_THRESH_SELECT_SHIFT	= 16,
+};
+
 struct nvme_feat_auto_pst {
 	__le64 entries[32];
 };
-- 
2.7.4


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur
  2019-06-13 15:20 [PATCH v4 0/3] nvme: add thermal zone devices Akinobu Mita
  2019-06-13 15:20 ` [PATCH v4 1/3] nvme: Export get and set features Akinobu Mita
  2019-06-13 15:20 ` [PATCH v4 2/3] nvme: add thermal zone devices Akinobu Mita
@ 2019-06-13 15:20 ` Akinobu Mita
  2019-06-25 14:44   ` Zhang Rui
  2019-06-20  6:36 ` [PATCH v4 0/3] nvme: add thermal zone devices Christoph Hellwig
  3 siblings, 1 reply; 9+ messages in thread
From: Akinobu Mita @ 2019-06-13 15:20 UTC (permalink / raw)
  To: linux-nvme, linux-pm
  Cc: Akinobu Mita, Zhang Rui, Eduardo Valentin, Daniel Lezcano,
	Keith Busch, Jens Axboe, Christoph Hellwig, Sagi Grimberg,
	Minwoo Im, Kenneth Heitke, Chaitanya Kulkarni

The NVMe controller supports the temperature threshold feature (Feature
Identifier 04h) that enables to configure the asynchronous event request
command to complete when the temperature is crossed its corresponding
temperature threshold.

This enables the reporting of asynchronous events from the controller when
the temperature reached or exceeded a temperature threshold.
In the case of the temperature threshold conditions, this notifies the
thermal framework.

The main purpose of this is to turn on a fan when overheated without
polling the device for the smart log that could prevent the lower power
state transitions.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Kenneth Heitke <kenneth.heitke@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v4
- support DT thermal zone device.
- use bitmap to iterate over implemented sensors

 drivers/nvme/host/core.c    | 14 ++++++++++++++
 drivers/nvme/host/nvme.h    |  5 +++++
 drivers/nvme/host/thermal.c | 12 ++++++++++++
 include/linux/nvme.h        |  7 +++++++
 4 files changed, 38 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 4be339b..44dadbb 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1186,6 +1186,9 @@ static void nvme_enable_aen(struct nvme_ctrl *ctrl)
 	u32 result, supported_aens = ctrl->oaes & NVME_AEN_SUPPORTED;
 	int status;
 
+	if (IS_ENABLED(CONFIG_THERMAL))
+		supported_aens |= NVME_SMART_CRIT_TEMPERATURE;
+
 	if (!supported_aens)
 		return;
 
@@ -3561,6 +3564,16 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_remove_namespaces);
 
+static void nvme_handle_aen_smart(struct nvme_ctrl *ctrl, u32 result)
+{
+	u32 aer_type = result & NVME_AER_TYPE_MASK;
+	u32 aer_info = (result >> NVME_AER_INFO_SHIFT) & NVME_AER_INFO_MASK;
+
+	if (aer_type == NVME_AER_SMART &&
+	    aer_info == NVME_AER_SMART_TEMP_THRESH)
+		nvme_thermal_notify_framework(ctrl);
+}
+
 static void nvme_aen_uevent(struct nvme_ctrl *ctrl)
 {
 	char *envp[2] = { NULL, NULL };
@@ -3582,6 +3595,7 @@ static void nvme_async_event_work(struct work_struct *work)
 	struct nvme_ctrl *ctrl =
 		container_of(work, struct nvme_ctrl, async_event_work);
 
+	nvme_handle_aen_smart(ctrl, ctrl->aen_result);
 	nvme_aen_uevent(ctrl);
 	ctrl->ops->submit_async_event(ctrl);
 }
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index a9c63ea..40325b6 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -605,6 +605,7 @@ static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
 
 int nvme_thermal_zones_register(struct nvme_ctrl *ctrl);
 void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl);
+void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl);
 
 #else
 
@@ -617,6 +618,10 @@ static inline void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
 {
 }
 
+static inline void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl)
+{
+}
+
 #endif /* CONFIG_THERMAL */
 
 #endif /* _NVME_H */
diff --git a/drivers/nvme/host/thermal.c b/drivers/nvme/host/thermal.c
index 18d0e4c..b5e835d 100644
--- a/drivers/nvme/host/thermal.c
+++ b/drivers/nvme/host/thermal.c
@@ -309,3 +309,15 @@ void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
 		__clear_bit(i, ctrl->tz_enabled);
 	}
 }
+
+void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl)
+{
+	int i;
+
+	for_each_set_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl->tz)) {
+		if (ctrl->tz[i].dev)
+			thermal_notify_framework(ctrl->tz[i].dev, 0);
+		if (ctrl->tz[i].of_dev)
+			thermal_notify_framework(ctrl->tz[i].of_dev, 0);
+	}
+}
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index f29728b..069b962 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -476,6 +476,7 @@ enum {
 };
 
 enum {
+	NVME_AER_TYPE_MASK		= 0x7,
 	NVME_AER_ERROR			= 0,
 	NVME_AER_SMART			= 1,
 	NVME_AER_NOTICE			= 2,
@@ -484,6 +485,12 @@ enum {
 };
 
 enum {
+	NVME_AER_INFO_SHIFT		= 8,
+	NVME_AER_INFO_MASK		= 0xff,
+	NVME_AER_SMART_TEMP_THRESH	= 0x01,
+};
+
+enum {
 	NVME_AER_NOTICE_NS_CHANGED	= 0x00,
 	NVME_AER_NOTICE_FW_ACT_STARTING = 0x01,
 	NVME_AER_NOTICE_ANA		= 0x03,
-- 
2.7.4


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 0/3] nvme: add thermal zone devices
  2019-06-13 15:20 [PATCH v4 0/3] nvme: add thermal zone devices Akinobu Mita
                   ` (2 preceding siblings ...)
  2019-06-13 15:20 ` [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur Akinobu Mita
@ 2019-06-20  6:36 ` Christoph Hellwig
  3 siblings, 0 replies; 9+ messages in thread
From: Christoph Hellwig @ 2019-06-20  6:36 UTC (permalink / raw)
  To: Akinobu Mita
  Cc: linux-nvme, linux-pm, Zhang Rui, Eduardo Valentin,
	Daniel Lezcano, Keith Busch, Jens Axboe, Christoph Hellwig,
	Sagi Grimberg, Minwoo Im, Kenneth Heitke, Chaitanya Kulkarni

So the code looks perfectly fine to me.  But I'm still not convinced we
have an important enough use case, and I'm worried about the AEN uevent
implication.

Keith, Sagi, Jens, any opinion?

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur
  2019-06-13 15:20 ` [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur Akinobu Mita
@ 2019-06-25 14:44   ` Zhang Rui
  2019-06-25 15:14     ` Akinobu Mita
  0 siblings, 1 reply; 9+ messages in thread
From: Zhang Rui @ 2019-06-25 14:44 UTC (permalink / raw)
  To: Akinobu Mita, linux-nvme, linux-pm
  Cc: Eduardo Valentin, Daniel Lezcano, Keith Busch, Jens Axboe,
	Christoph Hellwig, Sagi Grimberg, Minwoo Im, Kenneth Heitke,
	Chaitanya Kulkarni

On 五, 2019-06-14 at 00:20 +0900, Akinobu Mita wrote:
> The NVMe controller supports the temperature threshold feature
> (Feature
> Identifier 04h) that enables to configure the asynchronous event
> request
> command to complete when the temperature is crossed its corresponding
> temperature threshold.
> 
> This enables the reporting of asynchronous events from the controller
> when
> the temperature reached or exceeded a temperature threshold.
> In the case of the temperature threshold conditions, this notifies
> the
> thermal framework.
> 
> The main purpose of this is to turn on a fan when overheated without
> polling the device for the smart log that could prevent the lower
> power
> state transitions.
> 
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Cc: Minwoo Im <minwoo.im.dev@gmail.com>
> Cc: Kenneth Heitke <kenneth.heitke@intel.com>
> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
> * v4
> - support DT thermal zone device.
> - use bitmap to iterate over implemented sensors
> 
>  drivers/nvme/host/core.c    | 14 ++++++++++++++
>  drivers/nvme/host/nvme.h    |  5 +++++
>  drivers/nvme/host/thermal.c | 12 ++++++++++++
>  include/linux/nvme.h        |  7 +++++++
>  4 files changed, 38 insertions(+)
> 
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 4be339b..44dadbb 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -1186,6 +1186,9 @@ static void nvme_enable_aen(struct nvme_ctrl
> *ctrl)
>  	u32 result, supported_aens = ctrl->oaes &
> NVME_AEN_SUPPORTED;
>  	int status;
>  
> +	if (IS_ENABLED(CONFIG_THERMAL))
> +		supported_aens |= NVME_SMART_CRIT_TEMPERATURE;
> +
>  	if (!supported_aens)
>  		return;
>  
> @@ -3561,6 +3564,16 @@ void nvme_remove_namespaces(struct nvme_ctrl
> *ctrl)
>  }
>  EXPORT_SYMBOL_GPL(nvme_remove_namespaces);
>  
> +static void nvme_handle_aen_smart(struct nvme_ctrl *ctrl, u32
> result)
> +{
> +	u32 aer_type = result & NVME_AER_TYPE_MASK;
> +	u32 aer_info = (result >> NVME_AER_INFO_SHIFT) &
> NVME_AER_INFO_MASK;
> +
> +	if (aer_type == NVME_AER_SMART &&
> +	    aer_info == NVME_AER_SMART_TEMP_THRESH)
> +		nvme_thermal_notify_framework(ctrl);
> +}
> +
>  static void nvme_aen_uevent(struct nvme_ctrl *ctrl)
>  {
>  	char *envp[2] = { NULL, NULL };
> @@ -3582,6 +3595,7 @@ static void nvme_async_event_work(struct
> work_struct *work)
>  	struct nvme_ctrl *ctrl =
>  		container_of(work, struct nvme_ctrl,
> async_event_work);
>  
> +	nvme_handle_aen_smart(ctrl, ctrl->aen_result);
>  	nvme_aen_uevent(ctrl);
>  	ctrl->ops->submit_async_event(ctrl);
>  }
> diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
> index a9c63ea..40325b6 100644
> --- a/drivers/nvme/host/nvme.h
> +++ b/drivers/nvme/host/nvme.h
> @@ -605,6 +605,7 @@ static inline struct nvme_ns
> *nvme_get_ns_from_dev(struct device *dev)
>  
>  int nvme_thermal_zones_register(struct nvme_ctrl *ctrl);
>  void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl);
> +void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl);
>  
>  #else
>  
> @@ -617,6 +618,10 @@ static inline void
> nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
>  {
>  }
>  
> +static inline void nvme_thermal_notify_framework(struct nvme_ctrl
> *ctrl)
> +{
> +}
> +
>  #endif /* CONFIG_THERMAL */
>  
>  #endif /* _NVME_H */
> diff --git a/drivers/nvme/host/thermal.c
> b/drivers/nvme/host/thermal.c
> index 18d0e4c..b5e835d 100644
> --- a/drivers/nvme/host/thermal.c
> +++ b/drivers/nvme/host/thermal.c
> @@ -309,3 +309,15 @@ void nvme_thermal_zones_unregister(struct
> nvme_ctrl *ctrl)
>  		__clear_bit(i, ctrl->tz_enabled);
>  	}
>  }
> +
> +void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl)
> +{
> +	int i;
> +
> +	for_each_set_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl->tz))
> {
> +		if (ctrl->tz[i].dev)
> +			thermal_notify_framework(ctrl->tz[i].dev,
> 0);

I'd prefer to use thermal_zone_device_update() here to notify the
thermal framework.
thermal_notify_framework() will be removed sometime later.

thanks,
rui

> +		if (ctrl->tz[i].of_dev)
> +			thermal_notify_framework(ctrl->tz[i].of_dev, 
> 0);
> +	}
> +}
> diff --git a/include/linux/nvme.h b/include/linux/nvme.h
> index f29728b..069b962 100644
> --- a/include/linux/nvme.h
> +++ b/include/linux/nvme.h
> @@ -476,6 +476,7 @@ enum {
>  };
>  
>  enum {
> +	NVME_AER_TYPE_MASK		= 0x7,
>  	NVME_AER_ERROR			= 0,
>  	NVME_AER_SMART			= 1,
>  	NVME_AER_NOTICE			= 2,
> @@ -484,6 +485,12 @@ enum {
>  };
>  
>  enum {
> +	NVME_AER_INFO_SHIFT		= 8,
> +	NVME_AER_INFO_MASK		= 0xff,
> +	NVME_AER_SMART_TEMP_THRESH	= 0x01,
> +};
> +
> +enum {
>  	NVME_AER_NOTICE_NS_CHANGED	= 0x00,
>  	NVME_AER_NOTICE_FW_ACT_STARTING = 0x01,
>  	NVME_AER_NOTICE_ANA		= 0x03,

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 2/3] nvme: add thermal zone devices
  2019-06-13 15:20 ` [PATCH v4 2/3] nvme: add thermal zone devices Akinobu Mita
@ 2019-06-25 15:03   ` Zhang Rui
  2019-06-26 15:52     ` Akinobu Mita
  0 siblings, 1 reply; 9+ messages in thread
From: Zhang Rui @ 2019-06-25 15:03 UTC (permalink / raw)
  To: Akinobu Mita, linux-nvme, linux-pm
  Cc: Eduardo Valentin, Daniel Lezcano, Keith Busch, Jens Axboe,
	Christoph Hellwig, Sagi Grimberg, Minwoo Im, Kenneth Heitke,
	Chaitanya Kulkarni

On 五, 2019-06-14 at 00:20 +0900, Akinobu Mita wrote:
> The NVMe controller reports up to nine temperature values in the
> SMART /
> Health log page (the composite temperature and temperature sensor 1
> through
> temperature sensor 8).
> 
> This provides these temperatures via thermal zone devices.
> 
> Once the controller is identified, the thermal zone devices are
> created for
> all implemented temperature sensors including the composite
> temperature.
> 
> /sys/class/thermal/thermal_zone[0-*]:
>     |---type: 'nvme<instance>-temp<sensor>'
>     |---temp: Temperature
>     |---trip_point_0_temp: Over temperature threshold
> 
> The thermal_zone[0-*] contains a 'device' symlink to the
> corresponding nvme
> device.
> 
> On the other hand, the following symlinks to the thermal zone devices
> are
> created in the nvme device sysfs directory.
> 
> - temp0: Composite temperature
> - temp1: Temperature sensor 1
> ...
> - temp8: Temperature sensor 8
> 
> In addition to the standard thermal zone device, this also adds
> support for
> registering the DT thermal zone device.
> 
I don't see standard thermal zone device and DT thermal zone device are
registered at the same time very often, especially if they represent
the same sensor.

Eduardo, any comments?

thanks,
rui

> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Cc: Minwoo Im <minwoo.im.dev@gmail.com>
> Cc: Kenneth Heitke <kenneth.heitke@intel.com>
> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
> * v4
> - add thermal.c to hold thermal zone related code
> - add 'use_thermal_zone' module parameter
> - add CONFIG_THERMAL_WRITABLE_TRIPS dependency
> - add comment about the return value of nvme_thermal_zones_register()
> - support DT thermal zone device.
> - use bitmap to iterate over implemented sensors
> 
>  drivers/nvme/host/Kconfig   |   1 +
>  drivers/nvme/host/Makefile  |   1 +
>  drivers/nvme/host/core.c    |   5 +
>  drivers/nvme/host/nvme.h    |  35 +++++
>  drivers/nvme/host/thermal.c | 311
> ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/nvme.h        |   5 +
>  6 files changed, 358 insertions(+)
>  create mode 100644 drivers/nvme/host/thermal.c
> 
> diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
> index ec43ac9..90429f8 100644
> --- a/drivers/nvme/host/Kconfig
> +++ b/drivers/nvme/host/Kconfig
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  config NVME_CORE
>  	tristate
> +	select THERMAL_WRITABLE_TRIPS if THERMAL
>  
>  config BLK_DEV_NVME
>  	tristate "NVM Express block device"
> diff --git a/drivers/nvme/host/Makefile b/drivers/nvme/host/Makefile
> index 8a4b671..6018668 100644
> --- a/drivers/nvme/host/Makefile
> +++ b/drivers/nvme/host/Makefile
> @@ -14,6 +14,7 @@ nvme-core-$(CONFIG_TRACING)		+=
> trace.o
>  nvme-core-$(CONFIG_NVME_MULTIPATH)	+= multipath.o
>  nvme-core-$(CONFIG_NVM)			+= lightnvm.o
>  nvme-core-$(CONFIG_FAULT_INJECTION_DEBUG_FS)	+=
> fault_inject.o
> +nvme-core-$(CONFIG_THERMAL)		+= thermal.o
>  
>  nvme-y					+= pci.o
>  
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 7e3c786..4be339b 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -2696,6 +2696,10 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
>  	if (ret < 0)
>  		return ret;
>  
> +	ret = nvme_thermal_zones_register(ctrl);
> +	if (ret)
> +		return ret;
> +
>  	ctrl->identified = true;
>  
>  	return 0;
> @@ -3699,6 +3703,7 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)
>  {
>  	nvme_mpath_stop(ctrl);
>  	nvme_stop_keep_alive(ctrl);
> +	nvme_thermal_zones_unregister(ctrl);
>  	flush_work(&ctrl->async_event_work);
>  	cancel_work_sync(&ctrl->fw_act_work);
>  }
> diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
> index 038b893..a9c63ea 100644
> --- a/drivers/nvme/host/nvme.h
> +++ b/drivers/nvme/host/nvme.h
> @@ -15,6 +15,7 @@
>  #include <linux/sed-opal.h>
>  #include <linux/fault-inject.h>
>  #include <linux/rcupdate.h>
> +#include <linux/thermal.h>
>  
>  extern unsigned int nvme_io_timeout;
>  #define NVME_IO_TIMEOUT	(nvme_io_timeout * HZ)
> @@ -146,6 +147,13 @@ enum nvme_ctrl_state {
>  	NVME_CTRL_DEAD,
>  };
>  
> +struct nvme_tz {
> +	struct thermal_zone_params params;
> +	struct thermal_zone_device *dev;
> +	struct thermal_zone_device *of_dev;
> +	unsigned int sensor;
> +};
> +
>  struct nvme_ctrl {
>  	bool comp_seen;
>  	enum nvme_ctrl_state state;
> @@ -247,6 +255,15 @@ struct nvme_ctrl {
>  
>  	struct page *discard_page;
>  	unsigned long discard_page_busy;
> +
> +#ifdef CONFIG_THERMAL
> +	/*
> +	 * tz[0]: composite temperature
> +	 * tz[1-8]: temperature sensor 1 through 8
> +	 */
> +	struct nvme_tz tz[9];
> +	DECLARE_BITMAP(tz_enabled, 9);
> +#endif
>  };
>  
>  enum nvme_iopolicy {
> @@ -584,4 +601,22 @@ static inline struct nvme_ns
> *nvme_get_ns_from_dev(struct device *dev)
>  	return dev_to_disk(dev)->private_data;
>  }
>  
> +#ifdef CONFIG_THERMAL
> +
> +int nvme_thermal_zones_register(struct nvme_ctrl *ctrl);
> +void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl);
> +
> +#else
> +
> +static inline int nvme_thermal_zones_register(struct nvme_ctrl
> *ctrl)
> +{
> +	return 0;
> +}
> +
> +static inline void nvme_thermal_zones_unregister(struct nvme_ctrl
> *ctrl)
> +{
> +}
> +
> +#endif /* CONFIG_THERMAL */
> +
>  #endif /* _NVME_H */
> diff --git a/drivers/nvme/host/thermal.c
> b/drivers/nvme/host/thermal.c
> new file mode 100644
> index 0000000..18d0e4c
> --- /dev/null
> +++ b/drivers/nvme/host/thermal.c
> @@ -0,0 +1,311 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/moduleparam.h>
> +#include <asm/unaligned.h>
> +
> +#include "nvme.h"
> +
> +static bool use_thermal_zone = true;
> +module_param(use_thermal_zone, bool, 0444);
> +MODULE_PARM_DESC(use_thermal_zone,
> +	"Export nvme temperature via generic thermal interface");
> +
> +static int nvme_get_temp(struct nvme_ctrl *ctrl, unsigned int
> sensor, int *temp)
> +{
> +	struct nvme_smart_log *log;
> +	int ret;
> +
> +	BUILD_BUG_ON(ARRAY_SIZE(log->temp_sensor) + 1 !=
> ARRAY_SIZE(ctrl->tz));
> +
> +	if (WARN_ON_ONCE(sensor > ARRAY_SIZE(log->temp_sensor)))
> +		return -EINVAL;
> +
> +	log = kzalloc(sizeof(*log), GFP_KERNEL);
> +	if (!log)
> +		return -ENOMEM;
> +
> +	ret = nvme_get_log(ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0,
> log,
> +			   sizeof(*log), 0);
> +	if (ret) {
> +		ret = ret > 0 ? -EINVAL : ret;
> +		goto free_log;
> +	}
> +
> +	if (sensor)
> +		*temp = le16_to_cpu(log->temp_sensor[sensor - 1]);
> +	else
> +		*temp = get_unaligned_le16(log->temperature);
> +
> +free_log:
> +	kfree(log);
> +
> +	return ret;
> +}
> +
> +#define KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS((t) *
> 10)
> +#define MILLICELSIUS_TO_KELVIN(t) ((MILLICELSIUS_TO_DECI_KELVIN(t) +
> 5) / 10)
> +
> +static int nvme_tz_of_get_temp(void *data, int *temp)
> +{
> +	struct nvme_tz *tz = data;
> +	unsigned int sensor = tz->sensor;
> +	struct nvme_ctrl *ctrl = container_of(tz, struct nvme_ctrl,
> tz[sensor]);
> +	int ret;
> +
> +	ret = nvme_get_temp(ctrl, sensor, temp);
> +	if (!ret)
> +		*temp = KELVIN_TO_MILLICELSIUS(*temp);
> +
> +	return ret;
> +}
> +
> +static int nvme_tz_get_temp(struct thermal_zone_device *tzdev, int
> *temp)
> +{
> +	return nvme_tz_of_get_temp(tzdev->devdata, temp);
> +}
> +
> +static int nvme_tz_get_trip_type(struct thermal_zone_device *tzdev,
> +				 int trip, enum thermal_trip_type
> *type)
> +{
> +	*type = THERMAL_TRIP_ACTIVE;
> +
> +	return 0;
> +}
> +
> +static int nvme_get_over_temp_thresh(struct nvme_ctrl *ctrl,
> +				     unsigned int sensor, int *temp)
> +{
> +	unsigned int threshold = sensor <<
> NVME_TEMP_THRESH_SELECT_SHIFT;
> +	int status;
> +	int ret;
> +
> +	if (WARN_ON_ONCE(sensor >= ARRAY_SIZE(ctrl->tz)))
> +		return -EINVAL;
> +
> +	ret = nvme_get_features(ctrl, NVME_FEAT_TEMP_THRESH,
> threshold, NULL, 0,
> +				&status);
> +	if (!ret)
> +		*temp = status & NVME_TEMP_THRESH_MASK;
> +
> +	return ret > 0 ? -EINVAL : ret;
> +}
> +
> +static int nvme_set_over_temp_thresh(struct nvme_ctrl *ctrl,
> +				     unsigned int sensor, int temp)
> +{
> +	unsigned int threshold = sensor <<
> NVME_TEMP_THRESH_SELECT_SHIFT;
> +	int ret;
> +
> +	if (WARN_ON_ONCE(sensor >= ARRAY_SIZE(ctrl->tz)))
> +		return -EINVAL;
> +
> +	if (temp > NVME_TEMP_THRESH_MASK)
> +		return -EINVAL;
> +
> +	threshold |= temp & NVME_TEMP_THRESH_MASK;
> +
> +	ret = nvme_set_features(ctrl, NVME_FEAT_TEMP_THRESH,
> threshold, NULL, 0,
> +				NULL);
> +
> +	return ret > 0 ? -EINVAL : ret;
> +}
> +
> +static int nvme_tz_get_trip_temp(struct thermal_zone_device *tzdev,
> +				 int trip, int *temp)
> +{
> +	struct nvme_tz *tz = tzdev->devdata;
> +	unsigned int sensor = tz->sensor;
> +	struct nvme_ctrl *ctrl = container_of(tz, struct nvme_ctrl,
> tz[sensor]);
> +	int ret;
> +
> +	ret = nvme_get_over_temp_thresh(ctrl, sensor, temp);
> +	if (!ret)
> +		*temp = KELVIN_TO_MILLICELSIUS(*temp);
> +
> +	return ret;
> +}
> +
> +static int nvme_tz_of_set_trip_temp(void *data, int trip, int temp)
> +{
> +	struct nvme_tz *tz = data;
> +	unsigned int sensor = tz->sensor;
> +	struct nvme_ctrl *ctrl = container_of(tz, struct nvme_ctrl,
> tz[sensor]);
> +
> +	temp = MILLICELSIUS_TO_KELVIN(temp);
> +
> +	return nvme_set_over_temp_thresh(ctrl, sensor, temp);
> +}
> +
> +static int nvme_tz_set_trip_temp(struct thermal_zone_device *tzdev,
> +				 int trip, int temp)
> +{
> +	return nvme_tz_of_set_trip_temp(tzdev->devdata, trip, temp);
> +}
> +
> +static struct thermal_zone_device_ops nvme_tz_ops = {
> +	.get_temp = nvme_tz_get_temp,
> +	.get_trip_type = nvme_tz_get_trip_type,
> +	.get_trip_temp = nvme_tz_get_trip_temp,
> +	.set_trip_temp = nvme_tz_set_trip_temp,
> +};
> +
> +static struct thermal_zone_of_device_ops nvme_tz_of_ops = {
> +	.get_temp = nvme_tz_of_get_temp,
> +	.set_trip_temp = nvme_tz_of_set_trip_temp,
> +};
> +
> +static const struct thermal_zone_params nvme_tz_params = {
> +	.governor_name = "user_space",
> +	.no_hwmon = true,
> +};
> +
> +static int nvme_thermal_zone_register(struct nvme_ctrl *ctrl,
> +				      unsigned int sensor)
> +{
> +	struct thermal_zone_device *tzdev;
> +	struct nvme_tz *tz = &ctrl->tz[sensor];
> +	char name[THERMAL_NAME_LENGTH];
> +	int ret;
> +
> +	tz->params = nvme_tz_params;
> +	tz->sensor = sensor;
> +	snprintf(name, sizeof(name), "nvme%d_temp%u", ctrl-
> >instance, sensor);
> +
> +	tzdev = thermal_zone_device_register(name, 1, 1, tz,
> &nvme_tz_ops,
> +					     &tz->params, 0, 0);
> +	if (IS_ERR(tzdev)) {
> +		dev_err(ctrl->device,
> +			"Failed to register thermal zone device:
> %ld\n",
> +			PTR_ERR(tzdev));
> +		return PTR_ERR(tzdev);
> +	}
> +
> +	tz->dev = tzdev;
> +
> +	snprintf(name, sizeof(name), "temp%d", sensor);
> +	ret = sysfs_create_link(&ctrl->ctrl_device.kobj, &tz->dev-
> >device.kobj,
> +				name);
> +	if (ret)
> +		goto device_unregister;
> +
> +	ret = sysfs_create_link(&tz->dev->device.kobj,
> +				&ctrl->ctrl_device.kobj, "device");
> +	if (ret)
> +		goto remove_sensor_link;
> +
> +	tzdev = thermal_zone_of_sensor_register(ctrl->dev, sensor,
> tz,
> +						&nvme_tz_of_ops);
> +	if (!IS_ERR(tzdev)) {
> +		tz->of_dev = tzdev;
> +	} else if (PTR_ERR(tzdev) != -ENODEV) {
> +		ret = PTR_ERR(tzdev);
> +		dev_err(ctrl->device,
> +			"Failed to register thermal zone of sensor:
> %d\n", ret);
> +		goto remove_device_link;
> +	}
> +
> +	return 0;
> +
> +remove_device_link:
> +	sysfs_remove_link(&tz->dev->device.kobj, "device");
> +remove_sensor_link:
> +	sysfs_remove_link(&ctrl->ctrl_device.kobj, name);
> +device_unregister:
> +	thermal_zone_device_unregister(tz->dev);
> +	tz->dev = NULL;
> +
> +	return ret;
> +}
> +
> +/**
> + * nvme_thermal_zones_register() - register nvme thermal zone
> devices
> + * @ctrl: controller instance
> + *
> + * This function creates up to nine thermal zone devices for all
> implemented
> + * temperature sensors including the composite temperature.
> + * Each thermal zone device provides a single trip point temperature
> that is
> + * associated with an over temperature threshold.
> + * A negative value is returned when the device doesn't respond to
> the host
> + * and won't be able to continue initialization.
> + */
> +int nvme_thermal_zones_register(struct nvme_ctrl *ctrl)
> +{
> +	struct nvme_smart_log *log;
> +	int ret = 0;
> +	int err;
> +	int i;
> +
> +	if (!use_thermal_zone)
> +		return 0;
> +
> +	log = kzalloc(sizeof(*log), GFP_KERNEL);
> +	if (!log)
> +		return 0;
> +
> +	err = nvme_get_log(ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0,
> log,
> +			   sizeof(*log), 0);
> +	if (err) {
> +		dev_err(ctrl->device, "Failed to get SMART log:
> %d\n", err);
> +		/* If the device provided a response, then it's non-
> fatal */
> +		ret = (err > 0) ? 0 : err;
> +		goto out;
> +	}
> +
> +	for_each_clear_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl-
> >tz)) {
> +		int temp;
> +
> +		if (i)
> +			temp = le16_to_cpu(log->temp_sensor[i - 1]);
> +		else
> +			temp = get_unaligned_le16(log->temperature);
> +
> +		/*
> +		 * All implemented temperature sensors report a non-
> zero value
> +		 * in temperature sensor fields in the smart log
> page.
> +		 */
> +		if (!temp)
> +			continue;
> +
> +		err = nvme_thermal_zone_register(ctrl, i);
> +		if (err)
> +			goto out;
> +
> +		__set_bit(i, ctrl->tz_enabled);
> +	}
> +out:
> +	if (err)
> +		nvme_thermal_zones_unregister(ctrl);
> +
> +	kfree(log);
> +
> +	return ret;
> +}
> +
> +/**
> + * nvme_thermal_zones_unregister() - unregister nvme thermal zone
> devices
> + * @ctrl: controller instance
> + *
> + * This function removes the registered thermal zone devices and
> symlinks.
> + */
> +void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
> +{
> +	int i;
> +
> +	for_each_set_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl->tz))
> {
> +		struct nvme_tz *tz = &ctrl->tz[i];
> +		char name[20];
> +
> +		thermal_zone_of_sensor_unregister(ctrl->dev, tz-
> >of_dev);
> +		tz->of_dev = NULL;
> +
> +		sysfs_remove_link(&tz->dev->device.kobj, "device");
> +
> +		snprintf(name, sizeof(name), "temp%d", i);
> +		sysfs_remove_link(&ctrl->ctrl_device.kobj, name);
> +
> +		thermal_zone_device_unregister(tz->dev);
> +		tz->dev = NULL;
> +
> +		__clear_bit(i, ctrl->tz_enabled);
> +	}
> +}
> diff --git a/include/linux/nvme.h b/include/linux/nvme.h
> index 8028ada..f29728b 100644
> --- a/include/linux/nvme.h
> +++ b/include/linux/nvme.h
> @@ -749,6 +749,11 @@ struct nvme_write_zeroes_cmd {
>  
>  /* Features */
>  
> +enum {
> +	NVME_TEMP_THRESH_MASK		= 0xffff,
> +	NVME_TEMP_THRESH_SELECT_SHIFT	= 16,
> +};
> +
>  struct nvme_feat_auto_pst {
>  	__le64 entries[32];
>  };

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur
  2019-06-25 14:44   ` Zhang Rui
@ 2019-06-25 15:14     ` Akinobu Mita
  0 siblings, 0 replies; 9+ messages in thread
From: Akinobu Mita @ 2019-06-25 15:14 UTC (permalink / raw)
  To: Zhang Rui
  Cc: linux-nvme, linux-pm, Eduardo Valentin, Daniel Lezcano,
	Keith Busch, Jens Axboe, Christoph Hellwig, Sagi Grimberg,
	Minwoo Im, Kenneth Heitke, Chaitanya Kulkarni

2019年6月25日(火) 23:44 Zhang Rui <rui.zhang@intel.com>:
>
> On 五, 2019-06-14 at 00:20 +0900, Akinobu Mita wrote:
> > The NVMe controller supports the temperature threshold feature
> > (Feature
> > Identifier 04h) that enables to configure the asynchronous event
> > request
> > command to complete when the temperature is crossed its corresponding
> > temperature threshold.
> >
> > This enables the reporting of asynchronous events from the controller
> > when
> > the temperature reached or exceeded a temperature threshold.
> > In the case of the temperature threshold conditions, this notifies
> > the
> > thermal framework.
> >
> > The main purpose of this is to turn on a fan when overheated without
> > polling the device for the smart log that could prevent the lower
> > power
> > state transitions.
> >
> > Cc: Zhang Rui <rui.zhang@intel.com>
> > Cc: Eduardo Valentin <edubezval@gmail.com>
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Keith Busch <kbusch@kernel.org>
> > Cc: Jens Axboe <axboe@fb.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Sagi Grimberg <sagi@grimberg.me>
> > Cc: Minwoo Im <minwoo.im.dev@gmail.com>
> > Cc: Kenneth Heitke <kenneth.heitke@intel.com>
> > Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
> > Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> > ---
> > * v4
> > - support DT thermal zone device.
> > - use bitmap to iterate over implemented sensors
> >
> >  drivers/nvme/host/core.c    | 14 ++++++++++++++
> >  drivers/nvme/host/nvme.h    |  5 +++++
> >  drivers/nvme/host/thermal.c | 12 ++++++++++++
> >  include/linux/nvme.h        |  7 +++++++
> >  4 files changed, 38 insertions(+)
> >
> > diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> > index 4be339b..44dadbb 100644
> > --- a/drivers/nvme/host/core.c
> > +++ b/drivers/nvme/host/core.c
> > @@ -1186,6 +1186,9 @@ static void nvme_enable_aen(struct nvme_ctrl
> > *ctrl)
> >       u32 result, supported_aens = ctrl->oaes &
> > NVME_AEN_SUPPORTED;
> >       int status;
> >
> > +     if (IS_ENABLED(CONFIG_THERMAL))
> > +             supported_aens |= NVME_SMART_CRIT_TEMPERATURE;
> > +
> >       if (!supported_aens)
> >               return;
> >
> > @@ -3561,6 +3564,16 @@ void nvme_remove_namespaces(struct nvme_ctrl
> > *ctrl)
> >  }
> >  EXPORT_SYMBOL_GPL(nvme_remove_namespaces);
> >
> > +static void nvme_handle_aen_smart(struct nvme_ctrl *ctrl, u32
> > result)
> > +{
> > +     u32 aer_type = result & NVME_AER_TYPE_MASK;
> > +     u32 aer_info = (result >> NVME_AER_INFO_SHIFT) &
> > NVME_AER_INFO_MASK;
> > +
> > +     if (aer_type == NVME_AER_SMART &&
> > +         aer_info == NVME_AER_SMART_TEMP_THRESH)
> > +             nvme_thermal_notify_framework(ctrl);
> > +}
> > +
> >  static void nvme_aen_uevent(struct nvme_ctrl *ctrl)
> >  {
> >       char *envp[2] = { NULL, NULL };
> > @@ -3582,6 +3595,7 @@ static void nvme_async_event_work(struct
> > work_struct *work)
> >       struct nvme_ctrl *ctrl =
> >               container_of(work, struct nvme_ctrl,
> > async_event_work);
> >
> > +     nvme_handle_aen_smart(ctrl, ctrl->aen_result);
> >       nvme_aen_uevent(ctrl);
> >       ctrl->ops->submit_async_event(ctrl);
> >  }
> > diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
> > index a9c63ea..40325b6 100644
> > --- a/drivers/nvme/host/nvme.h
> > +++ b/drivers/nvme/host/nvme.h
> > @@ -605,6 +605,7 @@ static inline struct nvme_ns
> > *nvme_get_ns_from_dev(struct device *dev)
> >
> >  int nvme_thermal_zones_register(struct nvme_ctrl *ctrl);
> >  void nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl);
> > +void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl);
> >
> >  #else
> >
> > @@ -617,6 +618,10 @@ static inline void
> > nvme_thermal_zones_unregister(struct nvme_ctrl *ctrl)
> >  {
> >  }
> >
> > +static inline void nvme_thermal_notify_framework(struct nvme_ctrl
> > *ctrl)
> > +{
> > +}
> > +
> >  #endif /* CONFIG_THERMAL */
> >
> >  #endif /* _NVME_H */
> > diff --git a/drivers/nvme/host/thermal.c
> > b/drivers/nvme/host/thermal.c
> > index 18d0e4c..b5e835d 100644
> > --- a/drivers/nvme/host/thermal.c
> > +++ b/drivers/nvme/host/thermal.c
> > @@ -309,3 +309,15 @@ void nvme_thermal_zones_unregister(struct
> > nvme_ctrl *ctrl)
> >               __clear_bit(i, ctrl->tz_enabled);
> >       }
> >  }
> > +
> > +void nvme_thermal_notify_framework(struct nvme_ctrl *ctrl)
> > +{
> > +     int i;
> > +
> > +     for_each_set_bit(i, ctrl->tz_enabled, ARRAY_SIZE(ctrl->tz))
> > {
> > +             if (ctrl->tz[i].dev)
> > +                     thermal_notify_framework(ctrl->tz[i].dev,
> > 0);
>
> I'd prefer to use thermal_zone_device_update() here to notify the
> thermal framework.
> thermal_notify_framework() will be removed sometime later.

You are right.

I got my ROCKPro64 board and just started testing with pwm-fan cooling
device.  And then I also noticed that using thermal_notify_framework()
is insufficient when polling-delay is zero (i.e. interrupt driven thermal
zone).

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 2/3] nvme: add thermal zone devices
  2019-06-25 15:03   ` Zhang Rui
@ 2019-06-26 15:52     ` Akinobu Mita
  0 siblings, 0 replies; 9+ messages in thread
From: Akinobu Mita @ 2019-06-26 15:52 UTC (permalink / raw)
  To: Zhang Rui
  Cc: linux-nvme, linux-pm, Eduardo Valentin, Daniel Lezcano,
	Keith Busch, Jens Axboe, Christoph Hellwig, Sagi Grimberg,
	Minwoo Im, Kenneth Heitke, Chaitanya Kulkarni

2019年6月26日(水) 0:03 Zhang Rui <rui.zhang@intel.com>:
>
> On 五, 2019-06-14 at 00:20 +0900, Akinobu Mita wrote:
> > The NVMe controller reports up to nine temperature values in the
> > SMART /
> > Health log page (the composite temperature and temperature sensor 1
> > through
> > temperature sensor 8).
> >
> > This provides these temperatures via thermal zone devices.
> >
> > Once the controller is identified, the thermal zone devices are
> > created for
> > all implemented temperature sensors including the composite
> > temperature.
> >
> > /sys/class/thermal/thermal_zone[0-*]:
> >     |---type: 'nvme<instance>-temp<sensor>'
> >     |---temp: Temperature
> >     |---trip_point_0_temp: Over temperature threshold
> >
> > The thermal_zone[0-*] contains a 'device' symlink to the
> > corresponding nvme
> > device.
> >
> > On the other hand, the following symlinks to the thermal zone devices
> > are
> > created in the nvme device sysfs directory.
> >
> > - temp0: Composite temperature
> > - temp1: Temperature sensor 1
> > ...
> > - temp8: Temperature sensor 8
> >
> > In addition to the standard thermal zone device, this also adds
> > support for
> > registering the DT thermal zone device.
> >
> I don't see standard thermal zone device and DT thermal zone device are
> registered at the same time very often, especially if they represent
> the same sensor.

Good point.

It is pointless to register both standard and DT thermal zone devices for
the same sensor.  We should register either one. (i.e. firstly try to
register DT thermal zone.  If no thermal zones found for the sensor in
device tree, then try to register standard one)

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-13 15:20 [PATCH v4 0/3] nvme: add thermal zone devices Akinobu Mita
2019-06-13 15:20 ` [PATCH v4 1/3] nvme: Export get and set features Akinobu Mita
2019-06-13 15:20 ` [PATCH v4 2/3] nvme: add thermal zone devices Akinobu Mita
2019-06-25 15:03   ` Zhang Rui
2019-06-26 15:52     ` Akinobu Mita
2019-06-13 15:20 ` [PATCH v4 3/3] nvme: notify thermal framework when temperature threshold events occur Akinobu Mita
2019-06-25 14:44   ` Zhang Rui
2019-06-25 15:14     ` Akinobu Mita
2019-06-20  6:36 ` [PATCH v4 0/3] nvme: add thermal zone devices Christoph Hellwig

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox