Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Yangtao Li <tiny.windzz@gmail.com>
To: rui.zhang@intel.com, edubezval@gmail.com,
	daniel.lezcano@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org,
	davem@davemloft.net, gregkh@linuxfoundation.org,
	mchehab+samsung@kernel.org, linus.walleij@linaro.org,
	nicolas.ferre@microchip.com, paulmck@linux.ibm.com
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH v4 11/11] thermal: sun8i: add thermal driver for h3
Date: Sun, 23 Jun 2019 12:42:06 -0400
Message-ID: <20190623164206.7467-12-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190623164206.7467-1-tiny.windzz@gmail.com>

This patch adds the support for allwinner h3 thermal sensor.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 drivers/thermal/sun8i_thermal.c | 72 +++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 260b24340f5b..c8ee291f3b17 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -27,6 +27,14 @@
 #define TEMP_TO_REG				672
 #define CALIBRATE_DEFAULT			0x800
 
+#define SUN8I_THS_CTRL0				0x00
+#define SUN8I_THS_CTRL2				0x40
+#define SUN8I_THS_IC				0x44
+#define SUN8I_THS_IS				0x48
+#define SUN8I_THS_MFC				0x70
+#define SUN8I_THS_TEMP_CALIB			0x74
+#define SUN8I_THS_TEMP_DATA			0x80
+
 #define SUN50I_THS_CTRL0			0x00
 #define SUN50I_H6_THS_ENABLE			0x04
 #define SUN50I_H6_THS_PC			0x08
@@ -36,6 +44,9 @@
 #define SUN50I_H6_THS_TEMP_CALIB		0xa0
 #define SUN50I_H6_THS_TEMP_DATA			0xc0
 
+#define SUN8I_THS_CTRL0_T_ACQ0(x)		(GENMASK(15, 0) & (x))
+#define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
+
 #define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
 #define SUN50I_THS_FILTER_EN			BIT(2)
 #define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
@@ -121,6 +132,21 @@ static const struct regmap_config config = {
 	.fast_io = true,
 };
 
+static int sun8i_h3_irq_ack(struct ths_device *tmdev)
+{
+	int state, ret = 0;
+
+	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
+
+	if (state & BIT(8)) {
+		regmap_write(tmdev->regmap, SUN8I_THS_IS,
+			     BIT(8));
+		ret |= BIT(1);
+	}
+
+	return ret;
+}
+
 static int sun50i_h6_irq_ack(struct ths_device *tmdev)
 {
 	int i, state, ret = 0;
@@ -154,6 +180,14 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
+			       u16 *caldata, int callen)
+{
+	regmap_write(tmdev->regmap, SUN8I_THS_TEMP_CALIB, *caldata);
+
+	return 0;
+}
+
 static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 				   u16 *caldata, int callen)
 {
@@ -325,6 +359,32 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
 	return ret;
 }
 
+static int sun8i_h3_thermal_init(struct ths_device *tmdev)
+{
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN8I_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * period = (x + 1) * 4096 / clkin; ~10ms
+	 * enable data interrupt
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_IC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(58) | BIT(8));
+	/*
+	 * clkin = 24MHz
+	 * T acquire = clkin / (x + 1)
+	 *           = 20us
+	 * enable sensor
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
+		     SUN8I_THS_CTRL0_T_ACQ0(479));
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
+		     SUN8I_THS_CTRL2_T_ACQ1(479) | BIT(0));
+
+	return 0;
+}
+
 static int sun50i_thermal_init(struct ths_device *tmdev)
 {
 	int val;
@@ -431,6 +491,17 @@ static int sun8i_ths_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct ths_thermal_chip sun8i_h3_ths = {
+	.sensor_num = 1,
+	.offset = -1794,
+	.scale = -121,
+	.has_ahb_clk = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+};
+
 static const struct ths_thermal_chip sun50i_h6_ths = {
 	.sensor_num = 2,
 	.offset = -2794,
@@ -443,6 +514,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
 };
 
 static const struct of_device_id of_ths_match[] = {
+	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
 	{ /* sentinel */ },
 };
-- 
2.17.1


  parent reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23 16:41 [PATCH v4 00/11] add thermal driver for h6 Yangtao Li
2019-06-23 16:41 ` [PATCH v4 01/11] thermal: sun8i: " Yangtao Li
2019-06-24 12:07   ` Ondřej Jirman
2019-06-23 16:41 ` [PATCH v4 02/11] dt-bindings: thermal: add binding document for h6 thermal controller Yangtao Li
2019-06-24  8:47   ` Maxime Ripard
2019-06-23 16:41 ` [PATCH v4 03/11] thermal: fix indentation in makefile Yangtao Li
2019-06-23 16:41 ` [PATCH v4 04/11] thermal: sun8i: get ths sensor number from device compatible Yangtao Li
2019-06-23 16:42 ` [PATCH v4 05/11] thermal: sun8i: rework for sun8i_ths_get_temp() Yangtao Li
2019-06-23 16:42 ` [PATCH v4 06/11] thermal: sun8i: get ths init func from device compatible Yangtao Li
2019-06-23 16:42 ` [PATCH v4 07/11] thermal: sun8i: rework for ths irq handler func Yangtao Li
2019-06-23 16:42 ` [PATCH v4 08/11] thermal: sun8i: support ahb clocks Yangtao Li
2019-06-24 18:23   ` Maxime Ripard
2019-06-25  0:34     ` Ondřej Jirman
2019-06-25  8:25       ` Maxime Ripard
2019-06-23 16:42 ` [PATCH v4 09/11] thermal: sun8i: rework for ths calibrate func Yangtao Li
2019-06-23 16:42 ` [PATCH v4 10/11] dt-bindings: thermal: add binding document for h3 thermal controller Yangtao Li
2019-06-24  8:50   ` Maxime Ripard
2019-06-23 16:42 ` Yangtao Li [this message]
2019-06-24 12:05   ` [PATCH v4 11/11] thermal: sun8i: add thermal driver for h3 Ondřej Jirman
2019-07-10 23:09 ` [PATCH v4 00/11] add thermal driver for h6 Vasily Khoruzhick
2019-07-13 18:01   ` Vasily Khoruzhick
2019-07-26 17:46     ` Vasily Khoruzhick
2019-07-28 12:11       ` Frank Lee

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190623164206.7467-12-tiny.windzz@gmail.com \
    --to=tiny.windzz@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=paulmck@linux.ibm.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox