Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 10/11] PM / devfreq: tegra30: Add debug messages
Date: Mon, 24 Jun 2019 00:46:57 +0300
Message-ID: <20190623214658.11680-11-digetx@gmail.com> (raw)
In-Reply-To: <20190623214658.11680-1-digetx@gmail.com>

Add debug messages to know about what's happening in hardware and how
driver reacts.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/devfreq/tegra30-devfreq.c | 33 +++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 168bfe78e525..452bc10d2d72 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -277,6 +277,8 @@ static void tegra_actmon_get_lower_upper(struct tegra_devfreq *tegra,
 					 unsigned long *lower,
 					 unsigned long *upper)
 {
+	struct device *ddev = tegra->devfreq->dev.parent;
+	u32 offset = dev->config->offset;
 	unsigned long target_freq, min;
 
 	target_freq = count / ACTMON_SAMPLING_PERIOD * KHZ;
@@ -312,6 +314,9 @@ static void tegra_actmon_get_lower_upper(struct tegra_devfreq *tegra,
 	else
 		*upper = tegra_actmon_upper_freq(tegra, target_freq);
 
+	dev_dbg(ddev, "%03x: target_freq %lu lower freq %lu upper freq %lu\n",
+		offset, target_freq, *lower, *upper);
+
 	*lower /= KHZ;
 	*upper /= KHZ;
 
@@ -384,12 +389,32 @@ static void tegra_devfreq_update_wmark(struct tegra_devfreq *tegra,
 	device_writel(dev, count + delta, ACTMON_DEV_UPPER_WMARK);
 }
 
+static void actmon_device_debug(struct tegra_devfreq *tegra,
+				struct tegra_devfreq_device *dev,
+				const char *prefix)
+{
+	dev_dbg(tegra->devfreq->dev.parent,
+		"%03x: %s: 0x%08x 0x%08x a %u %u %u c %u %u %u b %lu cpu %u\n",
+		dev->config->offset, prefix,
+		device_readl(dev, ACTMON_DEV_INTR_STATUS),
+		device_readl(dev, ACTMON_DEV_CTRL),
+		device_readl(dev, ACTMON_DEV_AVG_COUNT),
+		device_readl(dev, ACTMON_DEV_AVG_LOWER_WMARK),
+		device_readl(dev, ACTMON_DEV_AVG_UPPER_WMARK),
+		device_readl(dev, ACTMON_DEV_COUNT),
+		device_readl(dev, ACTMON_DEV_LOWER_WMARK),
+		device_readl(dev, ACTMON_DEV_UPPER_WMARK),
+		dev->boost_freq, cpufreq_get(0));
+}
+
 static void actmon_isr_device(struct tegra_devfreq *tegra,
 			      struct tegra_devfreq_device *dev)
 {
 	u32 intr_status, dev_ctrl, avg_intr_mask;
 	bool low_activity = true;
 
+	actmon_device_debug(tegra, dev, "isr+");
+
 	dev->avg_count = device_readl(dev, ACTMON_DEV_AVG_COUNT);
 	intr_status = device_readl(dev, ACTMON_DEV_INTR_STATUS);
 	dev_ctrl = device_readl(dev, ACTMON_DEV_CTRL);
@@ -451,6 +476,8 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
 	device_writel(dev, dev_ctrl, ACTMON_DEV_CTRL);
 
 	device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
+
+	actmon_device_debug(tegra, dev, "isr-");
 }
 
 static unsigned long actmon_update_target(struct tegra_devfreq *tegra,
@@ -737,6 +764,7 @@ static struct devfreq_dev_profile tegra_devfreq_profile = {
 static int tegra_governor_get_target(struct devfreq *devfreq,
 				     unsigned long *freq)
 {
+	struct device *ddev = devfreq->dev.parent;
 	struct devfreq_dev_status *stat;
 	struct tegra_devfreq *tegra;
 	struct tegra_devfreq_device *dev;
@@ -759,6 +787,11 @@ static int tegra_governor_get_target(struct devfreq *devfreq,
 		dev_target_freq = actmon_update_target(tegra, dev);
 
 		target_freq = max(target_freq, dev_target_freq);
+
+		dev_dbg(ddev, "%03x: upd: dev_target_freq %lu\n",
+			dev->config->offset, dev_target_freq);
+
+		actmon_device_debug(tegra, dev, "upd");
 	}
 
 	*freq = target_freq * KHZ;
-- 
2.22.0


  parent reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23 21:46 [PATCH v1 00/11] More improvements for Tegra30 devfreq driver Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 01/11] PM / devfreq: tegra30: Change irq type to unsigned int Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 02/11] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 03/11] PM / devfreq: tegra30: Handle possible round-rate error Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 04/11] PM / devfreq: tegra30: Drop write-barrier Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 05/11] PM / devfreq: tegra30: Rework frequency management logic Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 06/11] PM / devfreq: tegra30: Reset boosting on startup Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 07/11] PM / devfreq: tegra30: Reset boosting if clock rate changed Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 08/11] PM / devfreq: tegra30: Stop de-boosting once it's finished Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 09/11] PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startup Dmitry Osipenko
2019-06-23 21:46 ` Dmitry Osipenko [this message]
2019-06-23 21:46 ` [PATCH v1 11/11] PM / devfreq: tegra30: Add Dmitry as maintainer Dmitry Osipenko
     [not found] ` <CGME20190623214841epcas5p161cceab51cb10d5146e57d49a696d5e5@epcms1p5>
2019-06-24  2:12   ` [PATCH v1 01/11] PM / devfreq: tegra30: Change irq type to unsigned int MyungJoo Ham

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190623214658.11680-11-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=cw00.choi@samsung.com \
    --cc=jonathanh@nvidia.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=thierry.reding@gmail.com \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox