Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 02/11] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped
Date: Mon, 24 Jun 2019 00:46:49 +0300
Message-ID: <20190623214658.11680-3-digetx@gmail.com> (raw)
In-Reply-To: <20190623214658.11680-1-digetx@gmail.com>

There is no real need to keep interrupt always-enabled, will be nicer
to keep it disabled where appropriate.

Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/devfreq/tegra30-devfreq.c | 43 ++++++++++++++++---------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index a27300f40b0b..5e2b133babdd 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -11,6 +11,7 @@
 #include <linux/devfreq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
@@ -416,8 +417,6 @@ static void tegra_actmon_start(struct tegra_devfreq *tegra)
 {
 	unsigned int i;
 
-	disable_irq(tegra->irq);
-
 	actmon_writel(tegra, ACTMON_SAMPLING_PERIOD - 1,
 		      ACTMON_GLB_PERIOD_CTRL);
 
@@ -442,8 +441,6 @@ static void tegra_actmon_stop(struct tegra_devfreq *tegra)
 	}
 
 	actmon_write_barrier(tegra);
-
-	enable_irq(tegra->irq);
 }
 
 static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
@@ -552,6 +549,12 @@ static int tegra_governor_event_handler(struct devfreq *devfreq,
 {
 	struct tegra_devfreq *tegra = dev_get_drvdata(devfreq->dev.parent);
 
+	/*
+	 * Couple device with the governor early as it is needed at
+	 * the moment of governor's start (used by ISR).
+	 */
+	tegra->devfreq = devfreq;
+
 	switch (event) {
 	case DEVFREQ_GOV_START:
 		devfreq_monitor_start(devfreq);
@@ -586,10 +589,11 @@ static struct devfreq_governor tegra_devfreq_governor = {
 
 static int tegra_devfreq_probe(struct platform_device *pdev)
 {
-	struct tegra_devfreq *tegra;
 	struct tegra_devfreq_device *dev;
-	unsigned int i;
+	struct tegra_devfreq *tegra;
+	struct devfreq *devfreq;
 	unsigned long rate;
+	unsigned int i;
 	int err;
 
 	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
@@ -625,6 +629,16 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	}
 	tegra->irq = err;
 
+	irq_set_status_flags(tegra->irq, IRQ_NOAUTOEN);
+
+	err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
+					actmon_thread_isr, IRQF_ONESHOT,
+					"tegra-devfreq", tegra);
+	if (err) {
+		dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
+		return err;
+	}
+
 	reset_control_assert(tegra->reset);
 
 	err = clk_prepare_enable(tegra->clock);
@@ -672,28 +686,15 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	}
 
 	tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
-	tegra->devfreq = devfreq_add_device(&pdev->dev,
-					    &tegra_devfreq_profile,
-					    "tegra_actmon",
-					    NULL);
+	devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
+				     "tegra_actmon", NULL);
 	if (IS_ERR(tegra->devfreq)) {
 		err = PTR_ERR(tegra->devfreq);
 		goto remove_governor;
 	}
 
-	err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
-					actmon_thread_isr, IRQF_ONESHOT,
-					"tegra-devfreq", tegra);
-	if (err) {
-		dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
-		goto remove_devfreq;
-	}
-
 	return 0;
 
-remove_devfreq:
-	devfreq_remove_device(tegra->devfreq);
-
 remove_governor:
 	devfreq_remove_governor(&tegra_devfreq_governor);
 
-- 
2.22.0


  parent reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23 21:46 [PATCH v1 00/11] More improvements for Tegra30 devfreq driver Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 01/11] PM / devfreq: tegra30: Change irq type to unsigned int Dmitry Osipenko
2019-06-23 21:46 ` Dmitry Osipenko [this message]
2019-06-23 21:46 ` [PATCH v1 03/11] PM / devfreq: tegra30: Handle possible round-rate error Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 04/11] PM / devfreq: tegra30: Drop write-barrier Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 05/11] PM / devfreq: tegra30: Rework frequency management logic Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 06/11] PM / devfreq: tegra30: Reset boosting on startup Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 07/11] PM / devfreq: tegra30: Reset boosting if clock rate changed Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 08/11] PM / devfreq: tegra30: Stop de-boosting once it's finished Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 09/11] PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startup Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 10/11] PM / devfreq: tegra30: Add debug messages Dmitry Osipenko
2019-06-23 21:46 ` [PATCH v1 11/11] PM / devfreq: tegra30: Add Dmitry as maintainer Dmitry Osipenko
     [not found] ` <CGME20190623214841epcas5p161cceab51cb10d5146e57d49a696d5e5@epcms1p5>
2019-06-24  2:12   ` [PATCH v1 01/11] PM / devfreq: tegra30: Change irq type to unsigned int MyungJoo Ham

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190623214658.11680-3-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=cw00.choi@samsung.com \
    --cc=jonathanh@nvidia.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=thierry.reding@gmail.com \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git