Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 11/24] PM / devfreq: tegra30: Add debug messages
Date: Mon,  8 Jul 2019 01:32:50 +0300
Message-ID: <20190707223303.6755-12-digetx@gmail.com> (raw)
In-Reply-To: <20190707223303.6755-1-digetx@gmail.com>

Add debug messages to know about what's happening in hardware and how
driver reacts.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/devfreq/tegra30-devfreq.c | 35 +++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 878c9396bb8c..c6c4a07d3e07 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -41,6 +41,7 @@
 #define ACTMON_DEV_AVG_UPPER_WMARK				0x10
 #define ACTMON_DEV_AVG_LOWER_WMARK				0x14
 #define ACTMON_DEV_COUNT_WEIGHT					0x18
+#define ACTMON_DEV_COUNT					0x1c
 #define ACTMON_DEV_AVG_COUNT					0x20
 #define ACTMON_DEV_INTR_STATUS					0x24
 
@@ -276,6 +277,9 @@ static void tegra_actmon_get_lower_upper(struct tegra_devfreq *tegra,
 					 unsigned long *lower,
 					 unsigned long *upper)
 {
+	struct device *ddev = tegra->devfreq->dev.parent;
+	u32 offset = dev->config->offset;
+
 	/*
 	 * Memory frequencies are guaranteed to have 1MHz granularity
 	 * and thus we need this rounding down to get a proper watermarks
@@ -288,6 +292,9 @@ static void tegra_actmon_get_lower_upper(struct tegra_devfreq *tegra,
 	*lower = tegra_actmon_lower_freq(tegra, target_freq);
 	*upper = tegra_actmon_upper_freq(tegra, target_freq);
 
+	dev_dbg(ddev, "%03x: target_freq %lu lower freq %lu upper freq %lu\n",
+		offset, target_freq, *lower, *upper);
+
 	*lower /= KHZ;
 	*upper /= KHZ;
 
@@ -367,11 +374,31 @@ static void tegra_devfreq_update_wmark(struct tegra_devfreq *tegra,
 	device_writel(dev, lower + delta, ACTMON_DEV_LOWER_WMARK);
 }
 
+static void actmon_device_debug(struct tegra_devfreq *tegra,
+				struct tegra_devfreq_device *dev,
+				const char *prefix)
+{
+	dev_dbg(tegra->devfreq->dev.parent,
+		"%03x: %s: 0x%08x 0x%08x a %u %u %u c %u %u %u b %lu cpu %u\n",
+		dev->config->offset, prefix,
+		device_readl(dev, ACTMON_DEV_INTR_STATUS),
+		device_readl(dev, ACTMON_DEV_CTRL),
+		device_readl(dev, ACTMON_DEV_AVG_COUNT),
+		device_readl(dev, ACTMON_DEV_AVG_LOWER_WMARK),
+		device_readl(dev, ACTMON_DEV_AVG_UPPER_WMARK),
+		device_readl(dev, ACTMON_DEV_COUNT),
+		device_readl(dev, ACTMON_DEV_LOWER_WMARK),
+		device_readl(dev, ACTMON_DEV_UPPER_WMARK),
+		dev->boost_freq, cpufreq_get(0));
+}
+
 static void actmon_isr_device(struct tegra_devfreq *tegra,
 			      struct tegra_devfreq_device *dev)
 {
 	u32 intr_status, dev_ctrl, avg_intr_mask;
 
+	actmon_device_debug(tegra, dev, "isr+");
+
 	dev->avg_count = device_readl(dev, ACTMON_DEV_AVG_COUNT);
 	intr_status = device_readl(dev, ACTMON_DEV_INTR_STATUS);
 	dev_ctrl = device_readl(dev, ACTMON_DEV_CTRL);
@@ -422,6 +449,8 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
 
 	device_writel(dev, dev_ctrl, ACTMON_DEV_CTRL);
 	device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
+
+	actmon_device_debug(tegra, dev, "isr-");
 }
 
 static unsigned long actmon_update_target(struct tegra_devfreq *tegra,
@@ -712,6 +741,7 @@ static struct devfreq_dev_profile tegra_devfreq_profile = {
 static int tegra_governor_get_target(struct devfreq *devfreq,
 				     unsigned long *freq)
 {
+	struct device *ddev = devfreq->dev.parent;
 	struct devfreq_dev_status *stat;
 	struct tegra_devfreq *tegra;
 	struct tegra_devfreq_device *dev;
@@ -734,6 +764,11 @@ static int tegra_governor_get_target(struct devfreq *devfreq,
 		dev_target_freq = actmon_update_target(tegra, dev);
 
 		target_freq = max(target_freq, dev_target_freq);
+
+		dev_dbg(ddev, "%03x: upd: dev_target_freq %lu\n",
+			dev->config->offset, dev_target_freq);
+
+		actmon_device_debug(tegra, dev, "upd");
 	}
 
 	*freq = target_freq * KHZ;
-- 
2.22.0


  parent reply index

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-07 22:32 [PATCH v4 00/24] More improvements for Tegra30 devfreq driver Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 01/24] PM / devfreq: tegra30: Change irq type to unsigned int Dmitry Osipenko
2019-07-16 11:35   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 02/24] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped Dmitry Osipenko
2019-07-16 11:47   ` Chanwoo Choi
2019-07-16 13:03     ` Dmitry Osipenko
2019-07-17  6:37       ` Chanwoo Choi
2019-07-17 16:44         ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 03/24] PM / devfreq: tegra30: Handle possible round-rate error Dmitry Osipenko
2019-07-16 11:50   ` Chanwoo Choi
2019-07-16 13:09     ` Dmitry Osipenko
2019-07-17  6:38       ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 04/24] PM / devfreq: tegra30: Drop write-barrier Dmitry Osipenko
2019-07-16 11:51   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 05/24] PM / devfreq: tegra30: Set up watermarks properly Dmitry Osipenko
2019-07-18 10:17   ` Chanwoo Choi
2019-07-19  0:00     ` Dmitry Osipenko
2019-07-19  1:31       ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 06/24] PM / devfreq: tegra30: Tune up boosting thresholds Dmitry Osipenko
2019-07-16 11:55   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 07/24] PM / devfreq: tegra30: Use CPUFreq notifier Dmitry Osipenko
2019-07-16 12:08   ` Chanwoo Choi
2019-07-16 13:18     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 08/24] PM / devfreq: tegra30: Move clk-notifier's registration to governor's start Dmitry Osipenko
2019-07-16 12:11   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 09/24] PM / devfreq: tegra30: Reset boosting on startup Dmitry Osipenko
2019-07-16 12:13   ` Chanwoo Choi
2019-07-16 13:19     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 10/24] PM / devfreq: tegra30: Don't enable consecutive-down interrupt " Dmitry Osipenko
2019-07-16 12:17   ` Chanwoo Choi
2019-07-16 15:17     ` Dmitry Osipenko
2019-07-07 22:32 ` Dmitry Osipenko [this message]
2019-07-16 12:23   ` [PATCH v4 11/24] PM / devfreq: tegra30: Add debug messages Chanwoo Choi
2019-07-16 13:26     ` Dmitry Osipenko
2019-07-17  6:45       ` Chanwoo Choi
2019-07-17 15:46         ` Dmitry Osipenko
2019-07-18  9:07           ` Chanwoo Choi
2019-07-19  1:13             ` Dmitry Osipenko
2019-07-19  1:22               ` Chanwoo Choi
2019-07-19 17:10                 ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 12/24] PM / devfreq: tegra30: Inline all one-line functions Dmitry Osipenko
2019-07-16 12:26   ` Chanwoo Choi
2019-07-16 13:35     ` Dmitry Osipenko
2019-07-18  9:09       ` Chanwoo Choi
2019-07-19  1:22         ` Dmitry Osipenko
2019-07-19  1:24           ` Chanwoo Choi
2019-07-19  1:27             ` Chanwoo Choi
2019-07-19  2:14               ` Dmitry Osipenko
2019-07-19  6:01                 ` Chanwoo Choi
2019-07-19 16:52                   ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 13/24] PM / devfreq: tegra30: Constify structs Dmitry Osipenko
2019-07-16 12:26   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 14/24] PM / devfreq: tegra30: Ensure that target freq won't overflow Dmitry Osipenko
2019-07-16 12:30   ` Chanwoo Choi
2019-07-16 13:59     ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 15/24] PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out Dmitry Osipenko
2019-07-16 12:32   ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 16/24] PM / devfreq: tegra30: Use kHz units uniformly in the code Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 17/24] PM / devfreq: tegra30: Use tracepoints for debugging Dmitry Osipenko
2019-07-18  9:47   ` Chanwoo Choi
2019-07-19  0:49     ` Dmitry Osipenko
2019-07-19  1:01       ` Chanwoo Choi
2019-07-19  1:50         ` Dmitry Osipenko
2019-07-07 22:32 ` [PATCH v4 18/24] PM / devfreq: tegra30: Optimize CPUFreq notifier Dmitry Osipenko
2019-07-18  9:48   ` Chanwoo Choi
2019-07-19  0:42     ` Dmitry Osipenko
2019-07-19  1:09       ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 19/24] PM / devfreq: tegra30: Optimize upper consecutive watermark selection Dmitry Osipenko
2019-07-18  9:51   ` Chanwoo Choi
2019-07-19  0:40     ` Dmitry Osipenko
2019-07-19  1:15       ` Chanwoo Choi
2019-07-19  1:17         ` Chanwoo Choi
2019-07-07 22:32 ` [PATCH v4 20/24] PM / devfreq: tegra30: Optimize upper average " Dmitry Osipenko
2019-07-19  1:36   ` Chanwoo Choi
2019-07-19  1:59     ` Dmitry Osipenko
2019-07-19  2:06       ` Chanwoo Choi
2019-07-19  2:21         ` Dmitry Osipenko
2019-07-19  6:09           ` Chanwoo Choi
2019-07-19  6:11             ` Chanwoo Choi
2019-07-19 17:52               ` Dmitry Osipenko
2019-07-24 11:17                 ` Chanwoo Choi
2019-07-24 11:19                   ` Chanwoo Choi
2019-07-07 22:33 ` [PATCH v4 21/24] PM / devfreq: tegra30: Synchronize average count on target's update Dmitry Osipenko
2019-07-18 10:15   ` Chanwoo Choi
2019-07-19  0:31     ` Dmitry Osipenko
2019-07-19  1:40       ` Chanwoo Choi
2019-07-19 16:46         ` Dmitry Osipenko
2019-07-07 22:33 ` [PATCH v4 22/24] PM / devfreq: tegra30: Include appropriate header Dmitry Osipenko
2019-07-18  9:58   ` Chanwoo Choi
2019-07-19  0:34     ` Dmitry Osipenko
2019-07-07 22:33 ` [PATCH v4 23/24] PM / devfreq: tegra30: Increase sampling period to 16ms Dmitry Osipenko
2019-07-18 10:00   ` Chanwoo Choi
2019-07-07 22:33 ` [PATCH v4 24/24] PM / devfreq: tegra20/30: Add Dmitry as a maintainer Dmitry Osipenko
2019-07-18  9:56   ` Chanwoo Choi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190707223303.6755-12-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=cw00.choi@samsung.com \
    --cc=jonathanh@nvidia.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=thierry.reding@gmail.com \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox