Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Ran Wang <ran.wang_1@nxp.com>
To: Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Li Biwen <biwen.li@nxp.com>, Len Brown <len.brown@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	Ran Wang <ran.wang_1@nxp.com>
Subject: [PATCH v5 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define
Date: Wed, 24 Jul 2019 15:47:21 +0800
Message-ID: <20190724074722.12270-2-ran.wang_1@nxp.com> (raw)
In-Reply-To: <20190724074722.12270-1-ran.wang_1@nxp.com>

By default, QorIQ SoC's RCPM register block is Big Endian. But
there are some exceptions, such as LS1088A and LS2088A, are Little
Endian. So add this optional property to help identify them.

Actually LS2021A and other Layerscapes won't totally follow Chassis
2.1, so separate them from powerpc SoC.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Change in v5:
	- Add 'Reviewed-by: Rob Herring <robh@kernel.org>' to commit message.
	- Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
	please see https://lore.kernel.org/patchwork/patch/1101022/

Change in v4:
	- Adjust indectation of 'ls1021a, ls1012a, ls1043a, ls1046a'.

Change in v3:
	- None.

Change in v2:
	- None.

 Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..5a33619 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -5,7 +5,7 @@ and power management.
 
 Required properites:
   - reg : Offset and length of the register set of the RCPM block.
-  - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+  - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
 	fsl,rcpm-wakeup property.
   - compatible : Must contain a chip-specific RCPM block compatible string
 	and (if applicable) may contain a chassis-version RCPM compatible
@@ -20,6 +20,7 @@ Required properites:
 	* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
 	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
 	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+	* "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
 
 All references to "1.0" and "2.0" refer to the QorIQ chassis version to
 which the chip complies.
@@ -27,14 +28,19 @@ Chassis Version		Example Chips
 ---------------		-------------------------------
 1.0				p4080, p5020, p5040, p2041, p3041
 2.0				t4240, b4860, b4420
-2.1				t1040, ls1021
+2.1				t1040,
+2.1+				ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+   will be Big Endian (default case).
 
 Example:
 The RCPM node for T4240:
 	rcpm: global-utilities@e2000 {
 		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
 		reg = <0xe2000 0x1000>;
-		fsl,#rcpm-wakeup-cells = <2>;
+		#fsl,rcpm-wakeup-cells = <2>;
 	};
 
 * Freescale RCPM Wakeup Source Device Tree Bindings
@@ -44,7 +50,7 @@ can be used as a wakeup source.
 
   - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
 	register cells. The number of IPPDEXPCR register cells is defined in
-	"fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+	"#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
 	the bit mask that should be set in IPPDEXPCR0, and the second register
 	cell is for IPPDEXPCR1, and so on.
 
-- 
2.7.4


  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-24  7:47 [PATCH v5 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-07-24  7:47 ` Ran Wang [this message]
2019-07-24  7:47 ` [PATCH v5 3/3] soc: fsl: add RCPM driver Ran Wang
2019-08-05  9:59 ` [PATCH v5 1/3] PM: wakeup: Add routine to help fetch wakeup source object Rafael J. Wysocki
2019-08-19  8:14   ` Ran Wang
2019-08-19  8:20     ` Rafael J. Wysocki
2019-08-19  8:33       ` Ran Wang
2019-08-19  8:54         ` Rafael J. Wysocki

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190724074722.12270-2-ran.wang_1@nxp.com \
    --to=ran.wang_1@nxp.com \
    --cc=biwen.li@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=len.brown@intel.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox