Linux-PM Archive on
 help / color / Atom feed
From: Michael Nosthoff <>
Cc: Michael Nosthoff <>,
	Brian Norris <>,
Subject: [PATCH v2] power: supply: sbs-battery: use correct flags field
Date: Fri, 16 Aug 2019 09:37:42 +0200
Message-ID: <> (raw)

the type flag is stored in the chip->flags field not in the
client->flags field. This currently leads to never using the ti
specific health function as client->flags doesn't use that bit.
So it's always falling back to the general one.

Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume

Signed-off-by: Michael Nosthoff <>
Reviewed-by: Brian Norris <>
Cc: <>
Changes since v1:
* Changed comment according to Brian's suggestions
* Added Fixes tag
* Added reviewed and cc stable

 drivers/power/supply/sbs-battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index 048d205d7074..2e86cc1e0e35 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -620,7 +620,7 @@ static int sbs_get_property(struct power_supply *psy,
 	switch (psp) {
-		if (client->flags & SBS_FLAGS_TI_BQ20Z75)
+		if (chip->flags & SBS_FLAGS_TI_BQ20Z75)
 			ret = sbs_get_ti_battery_presence_and_health(client,
 								     psp, val);

             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-16  7:37 Michael Nosthoff [this message]
2019-08-27 10:43 ` Enric Balletbo Serra
2019-09-02  7:59 ` Sebastian Reichel

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on

Archives are clonable:
	git clone --mirror linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ \
	public-inbox-index linux-pm

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox