[PATCH 1/1] dt-bindings: power/supply/sbs_sbs-battery: Addition of force_load binding Add device tree binding documentation for addition of force_load boolean value to allow loading a battery during boot even if not present at that time.

[PATCH 1/1] dt-bindings: power/supply/sbs_sbs-battery: Addition of force_load binding Add device tree binding documentation for addition of force_load boolean value to allow loading a battery during boot even if not present at that time.

[Richard Tresidder]

Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au>
---

Notes:
    Add device tree binding documentation for addition of force_load
    boolean value to allow loading a battery during boot even if not
    present at that time.
    Accompanying patch to drivers/power/supply/sbs-battery.c submitted to linux-pm@vger.kernel.org

 Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
index 4e78e51..187d7bb 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
@@ -15,7 +15,8 @@ Optional properties :
    after an external change notification.
  - sbs,battery-detect-gpios : The gpio which signals battery detection and
    a flag specifying its polarity.
-
+ - sbs,force-load : Allow loading of a hot-pluggable battery when there is no
+   GPIO detect available and the module is statically built.
 Example:
 
 	battery@b {
@@ -24,4 +25,5 @@ Example:
 		sbs,i2c-retry-count = <2>;
 		sbs,poll-retry-count = <10>;
 		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
+		sbs,force-load;
 	}
-- 
1.8.3.1

Re: [PATCH 1/1] dt-bindings: power/supply/sbs_sbs-battery: Addition of force_load binding Add device tree binding documentation for addition of force_load boolean value to allow loading a battery during boot even if not present at that time.

[Rob Herring]

On Thu, Jul 25, 2019 at 02:50:45PM +0800, Richard Tresidder wrote:
> Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au>
> ---
> 
> Notes:
>     Add device tree binding documentation for addition of force_load
>     boolean value to allow loading a battery during boot even if not
>     present at that time.
>     Accompanying patch to drivers/power/supply/sbs-battery.c submitted to linux-pm@vger.kernel.org
> 
>  Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
> index 4e78e51..187d7bb 100644
> --- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
> @@ -15,7 +15,8 @@ Optional properties :
>     after an external change notification.
>   - sbs,battery-detect-gpios : The gpio which signals battery detection and
>     a flag specifying its polarity.
> -
> + - sbs,force-load : Allow loading of a hot-pluggable battery when there is no
> +   GPIO detect available and the module is statically built.

What's a module? That's Linux specific and nothing to do with the 
binding. 

Can't you just force load if sbs,battery-detect-gpios is not present?

Rob

Re: [PATCH 1/1] dt-bindings: power/supply/sbs_sbs-battery: Addition of force_load binding Add device tree binding documentation for addition of force_load boolean value to allow loading a battery during boot even if not present at that time.

[Richard Tresidder]

There is a force load option when loading the driver as a module.
This adds the equivalent methodology for the binding path.
Though I suppose you could in fact just force load if the gpio detect 
isn't present.
Thats a good idea, just wasn't the existing driver flow. I can't think 
of any reason why we couldn't do that though.

I'll update the patch and resubmit V3
Will add a note about it in the docs

Please note I'd submitted this incorrectly when using our patch script 
last time, it's now correctly part of the combined patch

Regards
   Richard Tresidder
Richard Tresidder


**
On 17/08/2019 5:14 am, Rob Herring wrote:
> On Thu, Jul 25, 2019 at 02:50:45PM +0800, Richard Tresidder wrote:
>> Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au>
>> ---
>>
>> Notes:
>>      Add device tree binding documentation for addition of force_load
>>      boolean value to allow loading a battery during boot even if not
>>      present at that time.
>>      Accompanying patch to drivers/power/supply/sbs-battery.c submitted to linux-pm@vger.kernel.org
>>
>>   Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt | 4 +++-
>>   1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
>> index 4e78e51..187d7bb 100644
>> --- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
>> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
>> @@ -15,7 +15,8 @@ Optional properties :
>>      after an external change notification.
>>    - sbs,battery-detect-gpios : The gpio which signals battery detection and
>>      a flag specifying its polarity.
>> -
>> + - sbs,force-load : Allow loading of a hot-pluggable battery when there is no
>> +   GPIO detect available and the module is statically built.
> What's a module? That's Linux specific and nothing to do with the
> binding.
>
> Can't you just force load if sbs,battery-detect-gpios is not present?
>
> Rob
>
>