* [PATCH v6 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define
2019-08-21 3:15 [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
@ 2019-08-21 3:15 ` Ran Wang
2019-08-21 3:15 ` [PATCH v6 3/3] soc: fsl: add RCPM driver Ran Wang
2019-09-17 2:33 ` [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2 siblings, 0 replies; 6+ messages in thread
From: Ran Wang @ 2019-08-21 3:15 UTC (permalink / raw)
To: Li Yang, Rob Herring, Mark Rutland, Pavel Machek
Cc: Rafael J . Wysocki, Li Biwen, Len Brown, Greg Kroah-Hartman,
linuxppc-dev, linux-arm-kernel, devicetree, linux-kernel,
linux-pm, Ran Wang
By default, QorIQ SoC's RCPM register block is Big Endian. But
there are some exceptions, such as LS1088A and LS2088A, are
Little Endian. So add this optional property to help identify
them.
Actually LS2021A and other Layerscapes won't totally follow Chassis
2.1, so separate them from powerpc SoC.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Change in v6:
- None.
Change in v5:
- Add 'Reviewed-by: Rob Herring <robh@kernel.org>' to commit message.
- Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
please see https://lore.kernel.org/patchwork/patch/1101022/
Change in v4:
- Adjust indectation of 'ls1021a, ls1012a, ls1043a, ls1046a'.
Change in v3:
- None.
Change in v2:
- None.
Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..5a33619 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -5,7 +5,7 @@ and power management.
Required properites:
- reg : Offset and length of the register set of the RCPM block.
- - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+ - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
fsl,rcpm-wakeup property.
- compatible : Must contain a chip-specific RCPM block compatible string
and (if applicable) may contain a chassis-version RCPM compatible
@@ -20,6 +20,7 @@ Required properites:
* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+ * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
which the chip complies.
@@ -27,14 +28,19 @@ Chassis Version Example Chips
--------------- -------------------------------
1.0 p4080, p5020, p5040, p2041, p3041
2.0 t4240, b4860, b4420
-2.1 t1040, ls1021
+2.1 t1040,
+2.1+ ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+ will be Big Endian (default case).
Example:
The RCPM node for T4240:
rcpm: global-utilities@e2000 {
compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
reg = <0xe2000 0x1000>;
- fsl,#rcpm-wakeup-cells = <2>;
+ #fsl,rcpm-wakeup-cells = <2>;
};
* Freescale RCPM Wakeup Source Device Tree Bindings
@@ -44,7 +50,7 @@ can be used as a wakeup source.
- fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
register cells. The number of IPPDEXPCR register cells is defined in
- "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+ "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
the bit mask that should be set in IPPDEXPCR0, and the second register
cell is for IPPDEXPCR1, and so on.
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v6 3/3] soc: fsl: add RCPM driver
2019-08-21 3:15 [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-08-21 3:15 ` [PATCH v6 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define Ran Wang
@ 2019-08-21 3:15 ` Ran Wang
2019-08-21 3:23 ` Ran Wang
2019-09-17 2:33 ` [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2 siblings, 1 reply; 6+ messages in thread
From: Ran Wang @ 2019-08-21 3:15 UTC (permalink / raw)
To: Li Yang, Rob Herring, Mark Rutland, Pavel Machek
Cc: Rafael J . Wysocki, Li Biwen, Len Brown, Greg Kroah-Hartman,
linuxppc-dev, linux-arm-kernel, devicetree, linux-kernel,
linux-pm, Ran Wang
The NXP's QorIQ Processors based on ARM Core have RCPM module
(Run Control and Power Management), which performs system level
tasks associated with power management such as wakeup source control.
This driver depends on PM wakeup source framework which help to
collect wake information.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v6:
- Adjust related API usage to meet wakeup.c's update in patch 1/3.
Change in v5:
- Fix v4 regression of the return value of wakeup_source_get_next()
didn't pass to ws in while loop.
- Rename wakeup_source member 'attached_dev' to 'dev'.
- Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
please see https://lore.kernel.org/patchwork/patch/1101022/
Change in v4:
- Remove extra ',' in author line of rcpm.c
- Update usage of wakeup_source_get_next() to be less confusing to the
reader, code logic remain the same.
Change in v3:
- Some whitespace ajdustment.
Change in v2:
- Rebase Kconfig and Makefile update to latest mainline.
drivers/soc/fsl/Kconfig | 8 +++
drivers/soc/fsl/Makefile | 2 +
drivers/soc/fsl/rcpm.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 138 insertions(+)
create mode 100644 drivers/soc/fsl/rcpm.c
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index f9ad8ad..4918856 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -40,4 +40,12 @@ config DPAA2_CONSOLE
/dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
which can be used to dump the Management Complex and AIOP
firmware logs.
+
+config FSL_RCPM
+ bool "Freescale RCPM support"
+ depends on PM_SLEEP
+ help
+ The NXP QorIQ Processors based on ARM Core have RCPM module
+ (Run Control and Power Management), which performs all device-level
+ tasks associated with power management, such as wakeup source control.
endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 71dee8d..28c6dac 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,6 +6,8 @@
obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
+obj-$(CONFIG_FSL_RCPM) += rcpm.o
obj-$(CONFIG_FSL_GUTS) += guts.o
obj-$(CONFIG_FSL_MC_DPIO) += dpio/
obj-$(CONFIG_DPAA2_CONSOLE) += dpaa2-console.o
+obj-y += ftm_alarm.o
diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
new file mode 100644
index 0000000..82c0ad5
--- /dev/null
+++ b/drivers/soc/fsl/rcpm.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rcpm.c - Freescale QorIQ RCPM driver
+//
+// Copyright 2019 NXP
+//
+// Author: Ran Wang <ran.wang_1@nxp.com>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/kernel.h>
+
+#define RCPM_WAKEUP_CELL_MAX_SIZE 7
+
+struct rcpm {
+ unsigned int wakeup_cells;
+ void __iomem *ippdexpcr_base;
+ bool little_endian;
+};
+
+static int rcpm_pm_prepare(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct wakeup_source *ws;
+ struct rcpm *rcpm;
+ u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1], tmp;
+ int i, ret, idx;
+
+ rcpm = dev_get_drvdata(dev);
+ if (!rcpm)
+ return -EINVAL;
+
+ /* Begin with first registered wakeup source */
+ ws = wakeup_source_get_start(&idx);
+ do {
+ /* skip object which is not attached to device */
+ if (!ws->dev)
+ continue;
+
+ ret = device_property_read_u32_array(ws->dev,
+ "fsl,rcpm-wakeup", value, rcpm->wakeup_cells + 1);
+
+ /* Wakeup source should refer to current rcpm device */
+ if (ret || (np->phandle != value[0])) {
+ dev_info(dev, "%s doesn't refer to this rcpm\n",
+ ws->name);
+ continue;
+ }
+
+ for (i = 0; i < rcpm->wakeup_cells; i++) {
+ /* We can only OR related bits */
+ if (value[i + 1]) {
+ if (rcpm->little_endian) {
+ tmp = ioread32(rcpm->ippdexpcr_base + i * 4);
+ tmp |= value[i + 1];
+ iowrite32(tmp, rcpm->ippdexpcr_base + i * 4);
+ } else {
+ tmp = ioread32be(rcpm->ippdexpcr_base + i * 4);
+ tmp |= value[i + 1];
+ iowrite32be(tmp, rcpm->ippdexpcr_base + i * 4);
+ }
+ }
+ }
+ } while (ws = wakeup_source_get_next(ws));
+
+ wakeup_source_get_stop(idx);
+
+ return 0;
+}
+
+static const struct dev_pm_ops rcpm_pm_ops = {
+ .prepare = rcpm_pm_prepare,
+};
+
+static int rcpm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *r;
+ struct rcpm *rcpm;
+ int ret;
+
+ rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL);
+ if (!rcpm)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(rcpm->ippdexpcr_base)) {
+ ret = PTR_ERR(rcpm->ippdexpcr_base);
+ return ret;
+ }
+
+ rcpm->little_endian = device_property_read_bool(
+ &pdev->dev, "little-endian");
+
+ ret = device_property_read_u32(&pdev->dev,
+ "#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(&pdev->dev, rcpm);
+
+ return 0;
+}
+
+static const struct of_device_id rcpm_of_match[] = {
+ { .compatible = "fsl,qoriq-rcpm-2.1+", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rcpm_of_match);
+
+static struct platform_driver rcpm_driver = {
+ .driver = {
+ .name = "rcpm",
+ .of_match_table = rcpm_of_match,
+ .pm = &rcpm_pm_ops,
+ },
+ .probe = rcpm_probe,
+};
+
+module_platform_driver(rcpm_driver);
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* RE: [PATCH v6 3/3] soc: fsl: add RCPM driver
2019-08-21 3:15 ` [PATCH v6 3/3] soc: fsl: add RCPM driver Ran Wang
@ 2019-08-21 3:23 ` Ran Wang
2019-09-03 14:12 ` Pavel Machek
0 siblings, 1 reply; 6+ messages in thread
From: Ran Wang @ 2019-08-21 3:23 UTC (permalink / raw)
To: Pavel Machek
Cc: Ran Wang, Leo Li, Rob Herring, Mark Rutland, Rafael J . Wysocki,
Biwen Li, Len Brown, Greg Kroah-Hartman, linuxppc-dev,
linux-arm-kernel, devicetree, linux-kernel, linux-pm
Hi Pavel,
On Wednesday, August 21, 2019 11:16, Ran Wang wrote:
>
> The NXP's QorIQ Processors based on ARM Core have RCPM module (Run
> Control and Power Management), which performs system level tasks associated
> with power management such as wakeup source control.
>
> This driver depends on PM wakeup source framework which help to collect wake
> information.
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> Change in v6:
> - Adjust related API usage to meet wakeup.c's update in patch 1/3.
> Change in v5:
> - Fix v4 regression of the return value of wakeup_source_get_next()
> didn't pass to ws in while loop.
> - Rename wakeup_source member 'attached_dev' to 'dev'.
> - Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
> please see
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kern
> el.org%2Fpatchwork%2Fpatch%2F1101022%2F&data=02%7C01%7Cran.wa
> ng_1%40nxp.com%7C27cff523c0a54ce89afe08d725e5987b%7C686ea1d3bc2b4
> c6fa92cd99c5c301635%7C0%7C0%7C637019540358555022&sdata=4YYGD
> lwvB%2B4Y1436c1bOUzFyjYEqTU5HbiUFv5%2FCxi0%3D&reserved=0
>
> Change in v4:
> - Remove extra ',' in author line of rcpm.c
> - Update usage of wakeup_source_get_next() to be less confusing to
> the reader, code logic remain the same.
>
> Change in v3:
> - Some whitespace ajdustment.
>
> Change in v2:
> - Rebase Kconfig and Makefile update to latest mainline.
>
> drivers/soc/fsl/Kconfig | 8 +++
> drivers/soc/fsl/Makefile | 2 +
> drivers/soc/fsl/rcpm.c | 128
> +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 138 insertions(+)
> create mode 100644 drivers/soc/fsl/rcpm.c
>
> diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index
> f9ad8ad..4918856 100644
> --- a/drivers/soc/fsl/Kconfig
> +++ b/drivers/soc/fsl/Kconfig
> @@ -40,4 +40,12 @@ config DPAA2_CONSOLE
> /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
> which can be used to dump the Management Complex and AIOP
> firmware logs.
> +
> +config FSL_RCPM
> + bool "Freescale RCPM support"
> + depends on PM_SLEEP
> + help
> + The NXP QorIQ Processors based on ARM Core have RCPM module
> + (Run Control and Power Management), which performs all device-level
> + tasks associated with power management, such as wakeup source
> control.
> endmenu
> diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile index
> 71dee8d..28c6dac 100644
> --- a/drivers/soc/fsl/Makefile
> +++ b/drivers/soc/fsl/Makefile
> @@ -6,6 +6,8 @@
> obj-$(CONFIG_FSL_DPAA) += qbman/
> obj-$(CONFIG_QUICC_ENGINE) += qe/
> obj-$(CONFIG_CPM) += qe/
> +obj-$(CONFIG_FSL_RCPM) += rcpm.o
> obj-$(CONFIG_FSL_GUTS) += guts.o
> obj-$(CONFIG_FSL_MC_DPIO) += dpio/
> obj-$(CONFIG_DPAA2_CONSOLE) += dpaa2-console.o
> +obj-y += ftm_alarm.o
> diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c new file mode
> 100644 index 0000000..82c0ad5
> --- /dev/null
> +++ b/drivers/soc/fsl/rcpm.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// rcpm.c - Freescale QorIQ RCPM driver // // Copyright 2019 NXP // //
> +Author: Ran Wang <ran.wang_1@nxp.com>
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/suspend.h>
> +#include <linux/kernel.h>
> +
> +#define RCPM_WAKEUP_CELL_MAX_SIZE 7
> +
> +struct rcpm {
> + unsigned int wakeup_cells;
> + void __iomem *ippdexpcr_base;
> + bool little_endian;
> +};
> +
> +static int rcpm_pm_prepare(struct device *dev) {
> + struct device_node *np = dev->of_node;
> + struct wakeup_source *ws;
> + struct rcpm *rcpm;
> + u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1], tmp;
> + int i, ret, idx;
> +
> + rcpm = dev_get_drvdata(dev);
> + if (!rcpm)
> + return -EINVAL;
> +
> + /* Begin with first registered wakeup source */
> + ws = wakeup_source_get_start(&idx);
Since I have mad some change in this version, could you please take a look on this.
If it's OK to you, I would re-add 'Acked-by: Pavel Machek <pavel@ucw.cz> '
> + do {
> + /* skip object which is not attached to device */
> + if (!ws->dev)
> + continue;
> +
> + ret = device_property_read_u32_array(ws->dev,
> + "fsl,rcpm-wakeup", value, rcpm->wakeup_cells
> + 1);
> +
> + /* Wakeup source should refer to current rcpm device */
> + if (ret || (np->phandle != value[0])) {
> + dev_info(dev, "%s doesn't refer to this rcpm\n",
> + ws->name);
> + continue;
> + }
> +
> + for (i = 0; i < rcpm->wakeup_cells; i++) {
> + /* We can only OR related bits */
> + if (value[i + 1]) {
> + if (rcpm->little_endian) {
> + tmp = ioread32(rcpm->ippdexpcr_base
> + i * 4);
> + tmp |= value[i + 1];
> + iowrite32(tmp, rcpm->ippdexpcr_base
> + i * 4);
> + } else {
> + tmp = ioread32be(rcpm-
> >ippdexpcr_base + i * 4);
> + tmp |= value[i + 1];
> + iowrite32be(tmp, rcpm-
> >ippdexpcr_base + i * 4);
> + }
> + }
> + }
> + } while (ws = wakeup_source_get_next(ws));
> +
> + wakeup_source_get_stop(idx);
And here.
Thank you.
Regards
Ran
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops rcpm_pm_ops = {
> + .prepare = rcpm_pm_prepare,
> +};
> +
> +static int rcpm_probe(struct platform_device *pdev) {
> + struct device *dev = &pdev->dev;
> + struct resource *r;
> + struct rcpm *rcpm;
> + int ret;
> +
> + rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL);
> + if (!rcpm)
> + return -ENOMEM;
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!r)
> + return -ENODEV;
> +
> + rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r);
> + if (IS_ERR(rcpm->ippdexpcr_base)) {
> + ret = PTR_ERR(rcpm->ippdexpcr_base);
> + return ret;
> + }
> +
> + rcpm->little_endian = device_property_read_bool(
> + &pdev->dev, "little-endian");
> +
> + ret = device_property_read_u32(&pdev->dev,
> + "#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells);
> + if (ret)
> + return ret;
> +
> + dev_set_drvdata(&pdev->dev, rcpm);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rcpm_of_match[] = {
> + { .compatible = "fsl,qoriq-rcpm-2.1+", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rcpm_of_match);
> +
> +static struct platform_driver rcpm_driver = {
> + .driver = {
> + .name = "rcpm",
> + .of_match_table = rcpm_of_match,
> + .pm = &rcpm_pm_ops,
> + },
> + .probe = rcpm_probe,
> +};
> +
> +module_platform_driver(rcpm_driver);
> --
> 2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v6 3/3] soc: fsl: add RCPM driver
2019-08-21 3:23 ` Ran Wang
@ 2019-09-03 14:12 ` Pavel Machek
0 siblings, 0 replies; 6+ messages in thread
From: Pavel Machek @ 2019-09-03 14:12 UTC (permalink / raw)
To: Ran Wang
Cc: Leo Li, Rob Herring, Mark Rutland, Rafael J . Wysocki, Biwen Li,
Len Brown, Greg Kroah-Hartman, linuxppc-dev, linux-arm-kernel,
devicetree, linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 531 bytes --]
Hi!
> > + /* Begin with first registered wakeup source */
> > + ws = wakeup_source_get_start(&idx);
>
> Since I have mad some change in this version, could you please take a look on this.
> If it's OK to you, I would re-add 'Acked-by: Pavel Machek <pavel@ucw.cz> '
I'm sorry, I'm a bit busy at the moment and this is not really my
area.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object.
2019-08-21 3:15 [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-08-21 3:15 ` [PATCH v6 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define Ran Wang
2019-08-21 3:15 ` [PATCH v6 3/3] soc: fsl: add RCPM driver Ran Wang
@ 2019-09-17 2:33 ` Ran Wang
2 siblings, 0 replies; 6+ messages in thread
From: Ran Wang @ 2019-09-17 2:33 UTC (permalink / raw)
To: Rafael J . Wysocki, Leo Li, Rob Herring, Mark Rutland, Pavel Machek
Cc: Ran Wang, Biwen Li, Len Brown, Greg Kroah-Hartman, linuxppc-dev,
linux-arm-kernel, devicetree, linux-kernel, linux-pm
Hi Rafael,
On Wednesday, August 21, 2019 11:16, Ran Wang wrote:
>
> Some user might want to go through all registered wakeup sources and doing
> things accordingly. For example, SoC PM driver might need to do HW
> programming to prevent powering down specific IP which wakeup source
> depending on. So add this API to help walk through all registered wakeup source
> objects on that list and return them one by one.
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> Change in v6:
> - Add wakeup_source_get_star() and wakeup_source_get_stop() to
> aligned
> with wakeup_sources_stats_seq_start/nex/stop.
How about this version, could you please give any comment? Thanks.
Regards,
Ran
<snip>
^ permalink raw reply [flat|nested] 6+ messages in thread