From: Ran Wang <ran.wang_1@nxp.com>
To: Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
Li Biwen <biwen.li@nxp.com>, Len Brown <len.brown@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
Ran Wang <ran.wang_1@nxp.com>
Subject: [PATCH v6 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define
Date: Wed, 21 Aug 2019 11:15:36 +0800 [thread overview]
Message-ID: <20190821031537.46824-2-ran.wang_1@nxp.com> (raw)
In-Reply-To: <20190821031537.46824-1-ran.wang_1@nxp.com>
By default, QorIQ SoC's RCPM register block is Big Endian. But
there are some exceptions, such as LS1088A and LS2088A, are
Little Endian. So add this optional property to help identify
them.
Actually LS2021A and other Layerscapes won't totally follow Chassis
2.1, so separate them from powerpc SoC.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Change in v6:
- None.
Change in v5:
- Add 'Reviewed-by: Rob Herring <robh@kernel.org>' to commit message.
- Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
please see https://lore.kernel.org/patchwork/patch/1101022/
Change in v4:
- Adjust indectation of 'ls1021a, ls1012a, ls1043a, ls1046a'.
Change in v3:
- None.
Change in v2:
- None.
Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..5a33619 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -5,7 +5,7 @@ and power management.
Required properites:
- reg : Offset and length of the register set of the RCPM block.
- - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+ - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
fsl,rcpm-wakeup property.
- compatible : Must contain a chip-specific RCPM block compatible string
and (if applicable) may contain a chassis-version RCPM compatible
@@ -20,6 +20,7 @@ Required properites:
* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+ * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
which the chip complies.
@@ -27,14 +28,19 @@ Chassis Version Example Chips
--------------- -------------------------------
1.0 p4080, p5020, p5040, p2041, p3041
2.0 t4240, b4860, b4420
-2.1 t1040, ls1021
+2.1 t1040,
+2.1+ ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+ will be Big Endian (default case).
Example:
The RCPM node for T4240:
rcpm: global-utilities@e2000 {
compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
reg = <0xe2000 0x1000>;
- fsl,#rcpm-wakeup-cells = <2>;
+ #fsl,rcpm-wakeup-cells = <2>;
};
* Freescale RCPM Wakeup Source Device Tree Bindings
@@ -44,7 +50,7 @@ can be used as a wakeup source.
- fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
register cells. The number of IPPDEXPCR register cells is defined in
- "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+ "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
the bit mask that should be set in IPPDEXPCR0, and the second register
cell is for IPPDEXPCR1, and so on.
--
2.7.4
next prev parent reply other threads:[~2019-08-21 3:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 3:15 [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-08-21 3:15 ` Ran Wang [this message]
2019-08-21 3:15 ` [PATCH v6 3/3] soc: fsl: add RCPM driver Ran Wang
2019-08-21 3:23 ` Ran Wang
2019-09-03 14:12 ` Pavel Machek
2019-09-17 2:33 ` [PATCH v6 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821031537.46824-2-ran.wang_1@nxp.com \
--to=ran.wang_1@nxp.com \
--cc=biwen.li@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=len.brown@intel.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=pavel@ucw.cz \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).