From: Guillaume La Roque <glaroque@baylibre.com>
To: rui.zhang@intel.com, edubezval@gmail.com, daniel.lezcano@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
Date: Thu, 22 Aug 2019 00:24:19 +0200 [thread overview]
Message-ID: <20190821222421.30242-5-glaroque@baylibre.com> (raw)
In-Reply-To: <20190821222421.30242-1-glaroque@baylibre.com>
Add minimal thermal zone for two temperature sensor
One is located close to the DDR and the other one is
located close to the PLLs (between the CPU and GPU)
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-g12a-sei510.dts | 70 +++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index c9fa23a56562..35d2ebbd6d4e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "seirobotics,sei510", "amlogic,g12a";
@@ -33,6 +34,67 @@
ethernet0 = ðmac;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&cpu_temp>;
+
+ trips {
+ cpu_hot: cpu-hot {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_critical>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&ddr_temp>;
+
+ trips {
+ ddr_critical: ddr-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&ddr_critical>;
+ cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
mono_dac: audio-codec-0 {
compatible = "maxim,max98357a";
#sound-dai-cells = <0>;
@@ -321,6 +383,7 @@
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
+ #cooling-cells = <2>;
};
&cpu1 {
@@ -328,6 +391,7 @@
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
+ #cooling-cells = <2>;
};
&cpu2 {
@@ -335,6 +399,7 @@
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
+ #cooling-cells = <2>;
};
&cpu3 {
@@ -342,6 +407,7 @@
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
+ #cooling-cells = <2>;
};
&cvbs_vdac_port {
@@ -368,6 +434,10 @@
status = "okay";
};
+&mali {
+ #cooling-cells = <2>;
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
--
2.17.1
next prev parent reply other threads:[~2019-08-21 22:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-08-21 23:40 ` Kevin Hilman
2019-09-13 10:41 ` Amit Kucheria
2019-08-21 22:24 ` [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-09-13 9:21 ` Amit Kucheria
2019-08-21 22:24 ` [PATCH v4 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-08-21 22:24 ` Guillaume La Roque [this message]
2019-08-21 23:29 ` [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Kevin Hilman
2019-08-22 9:15 ` Neil Armstrong
2019-08-22 19:59 ` Kevin Hilman
2019-09-13 7:47 ` Amit Kucheria
2019-08-21 22:24 ` [PATCH v4 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
2019-08-21 22:24 ` [PATCH v4 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
2019-08-21 23:39 ` [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821222421.30242-5-glaroque@baylibre.com \
--to=glaroque@baylibre.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).