[PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[Andrey Smirnov]

Everyone:

This series contains patches adding support for HWMON integration, bug
fixes and general improvements (hopefully) for TMU driver I made while
working on it on i.MX8MQ.

Feedback is welcome!

Thanks,
Andrey Smirnov

Changes since [v6]:

   - Rebased on top of Zhang's "next" branch

   - Added "thermal: qoriq: Drop unnecessary drvdata cleanup"

Changes since [v5]

    - Rebased on recent linux-next, dropped "thermal: qoriq: Remove
      unnecessary DT node is NULL check" since it is already in the
      tree

    - Dropped dependency on [rfc]

Changes since [v4]

    - Collected Tested-by from Lucas
    
    - Collected Reviewed-by from Daniel

    - Converted "thermal: qoriq: Enable all sensors before registering
      them" to use if instead of switch statement for error checking

Changes since [v3]

    - Series reabse on top of [rfc]
    
    - Fixed incorrect goto label in "thermal: qoriq: Pass data to
      qoriq_tmu_calibration()"
      
    - Added REGS_TRITSR() register description to "thermal: qoriq: Do
      not report invalid temperature reading"
      
    - Reworded commit message of "thermal: qoriq: Remove unnecessary
      DT node is NULL check"

Changes since [v2]

    - Patches rebased on v5.1-rc1

Changes since [v1]

    - Rebased on "linus" branch of
      git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
      that included latest chagnes adding multi-sensors support

    - Dropped

	thermal: qoriq: Add support for multiple thremal sites
	thermal: qoriq: Be more strict when parsing
	thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()

      since they are no longer relevant

    - Added

	thermal: qoriq: Don't store struct thermal_zone_device reference
	thermal: qoriq: Add local struct qoriq_sensor pointer
	thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
	thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly

      to simplify latest codebase

    - Changed "thermal: qoriq: Do not report invalid temperature
      reading" to use regmap_read_poll_timeout() to make sure that
      tmu_get_temp() waits for fist sample to be ready before
      reporting it. This case is triggered on my setup if
      qoriq_thermal is compiled as a module

[v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@gmail.com
[v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com
[v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@gmail.com
[v4] lore.kernel.org/lkml/20190413082748.29990-1-andrew.smirnov@gmail.com
[v5] lore.kernel.org/lkml/20190424064830.18179-1-andrew.smirnov@gmail.com
[v6] lore.kernel.org/lkml/20190821012612.7823-1-andrew.smirnov@gmail.com
[rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@linaro.org

Andrey Smirnov (12):
  thermal: qoriq: Add local struct device pointer
  thermal: qoriq: Don't store struct thermal_zone_device reference
  thermal: qoriq: Add local struct qoriq_sensor pointer
  thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
  thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
  thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
  thermal: qoriq: Drop unnecessary drvdata cleanup
  thermal: qoriq: Convert driver to use regmap API
  thermal: qoriq: Enable all sensors before registering them
  thermal: qoriq: Do not report invalid temperature reading
  thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
  thermal: qoriq: Add hwmon support

 drivers/thermal/qoriq_thermal.c | 252 +++++++++++++++++---------------
 drivers/thermal/thermal_hwmon.c |  28 ++++
 drivers/thermal/thermal_hwmon.h |   7 +
 3 files changed, 167 insertions(+), 120 deletions(-)

-- 
2.21.0

[PATCH v7 01/12] thermal: qoriq: Add local struct device pointer

[Andrey Smirnov]

Use a local "struct device *dev" for brevity. No functional change
intended.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 39542c670301..5df6267a5da0 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -194,8 +194,9 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	int ret;
 	struct qoriq_tmu_data *data;
 	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 
-	data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
+	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -206,17 +207,17 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	data->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(data->regs)) {
-		dev_err(&pdev->dev, "Failed to get memory region\n");
+		dev_err(dev, "Failed to get memory region\n");
 		return PTR_ERR(data->regs);
 	}
 
-	data->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	data->clk = devm_clk_get_optional(dev, NULL);
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
 	ret = clk_prepare_enable(data->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to enable clock\n");
+		dev_err(dev, "Failed to enable clock\n");
 		return ret;
 	}
 
@@ -228,7 +229,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	ret = qoriq_tmu_register_tmu_zone(pdev);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register sensors\n");
+		dev_err(dev, "Failed to register sensors\n");
 		ret = -ENODEV;
 		goto err;
 	}
-- 
2.21.0

[PATCH v7 02/12] thermal: qoriq: Don't store struct thermal_zone_device reference

[Andrey Smirnov]

Struct thermal_zone_device reference stored as sensor's private data
isn't really used anywhere in the code. Drop it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 5df6267a5da0..b471c226f06b 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -66,7 +66,6 @@ struct qoriq_tmu_data;
  * Thermal zone data
  */
 struct qoriq_sensor {
-	struct thermal_zone_device	*tzd;
 	struct qoriq_tmu_data		*qdata;
 	int				id;
 };
@@ -116,6 +115,9 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 	int id, sites = 0;
 
 	for (id = 0; id < SITES_MAX; id++) {
+		struct thermal_zone_device *tzd;
+		int ret;
+
 		qdata->sensor[id] = devm_kzalloc(&pdev->dev,
 				sizeof(struct qoriq_sensor), GFP_KERNEL);
 		if (!qdata->sensor[id])
@@ -123,13 +125,16 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 		qdata->sensor[id]->id = id;
 		qdata->sensor[id]->qdata = qdata;
-		qdata->sensor[id]->tzd = devm_thermal_zone_of_sensor_register(
-				&pdev->dev, id, qdata->sensor[id], &tmu_tz_ops);
-		if (IS_ERR(qdata->sensor[id]->tzd)) {
-			if (PTR_ERR(qdata->sensor[id]->tzd) == -ENODEV)
+
+		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
+							   qdata->sensor[id],
+							   &tmu_tz_ops);
+		ret = PTR_ERR_OR_ZERO(tzd);
+		if (ret) {
+			if (ret == -ENODEV)
 				continue;
 			else
-				return PTR_ERR(qdata->sensor[id]->tzd);
+				return ret;
 		}
 
 		sites |= 0x1 << (15 - id);
-- 
2.21.0

[PATCH v7 03/12] thermal: qoriq: Add local struct qoriq_sensor pointer

[Andrey Smirnov]

Add local struct qoriq_sensor pointer in qoriq_tmu_register_tmu_zone()
for brevity.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index b471c226f06b..ae22836c471d 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -116,18 +116,22 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
+		struct qoriq_sensor *sensor;
 		int ret;
 
-		qdata->sensor[id] = devm_kzalloc(&pdev->dev,
-				sizeof(struct qoriq_sensor), GFP_KERNEL);
+		sensor = devm_kzalloc(&pdev->dev,
+				      sizeof(struct qoriq_sensor),
+				      GFP_KERNEL);
 		if (!qdata->sensor[id])
 			return -ENOMEM;
 
-		qdata->sensor[id]->id = id;
-		qdata->sensor[id]->qdata = qdata;
+		qdata->sensor[id] = sensor;
+
+		sensor->id = id;
+		sensor->qdata = qdata;
 
 		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
-							   qdata->sensor[id],
+							   sensor,
 							   &tmu_tz_ops);
 		ret = PTR_ERR_OR_ZERO(tzd);
 		if (ret) {
-- 
2.21.0

[PATCH v7 04/12] thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data

[Andrey Smirnov]

Embed per-sensor data into struct qoriq_tmu_data so we can drop the
code allocating it. This also allows us to get rid of per-sensor back
reference to struct qoriq_tmu_data since now its address can be
calculated using container_of().

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index ae22836c471d..f8f5228d83af 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -60,13 +60,10 @@ struct qoriq_tmu_regs {
 	u32 ttr3cr;		/* Temperature Range 3 Control Register */
 };
 
-struct qoriq_tmu_data;
-
 /*
  * Thermal zone data
  */
 struct qoriq_sensor {
-	struct qoriq_tmu_data		*qdata;
 	int				id;
 };
 
@@ -74,9 +71,14 @@ struct qoriq_tmu_data {
 	struct qoriq_tmu_regs __iomem *regs;
 	struct clk *clk;
 	bool little_endian;
-	struct qoriq_sensor	*sensor[SITES_MAX];
+	struct qoriq_sensor	sensor[SITES_MAX];
 };
 
+static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
+{
+	return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
+}
+
 static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
 {
 	if (p->little_endian)
@@ -96,7 +98,7 @@ static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
 static int tmu_get_temp(void *p, int *temp)
 {
 	struct qoriq_sensor *qsensor = p;
-	struct qoriq_tmu_data *qdata = qsensor->qdata;
+	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
 
 	val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
@@ -116,19 +118,10 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
-		struct qoriq_sensor *sensor;
+		struct qoriq_sensor *sensor = &qdata->sensor[id];
 		int ret;
 
-		sensor = devm_kzalloc(&pdev->dev,
-				      sizeof(struct qoriq_sensor),
-				      GFP_KERNEL);
-		if (!qdata->sensor[id])
-			return -ENOMEM;
-
-		qdata->sensor[id] = sensor;
-
 		sensor->id = id;
-		sensor->qdata = qdata;
 
 		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
 							   sensor,
-- 
2.21.0

[PATCH v7 05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly

[Andrey Smirnov]

Pass all necessary data to qoriq_tmu_register_tmu_zone() directly
instead of passing a platform device and then deriving it. This is
done as a first step to simplify resource deallocation code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index f8f5228d83af..5b9f2a31d275 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -111,9 +111,9 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
 	.get_temp = tmu_get_temp,
 };
 
-static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
+static int qoriq_tmu_register_tmu_zone(struct device *dev,
+				       struct qoriq_tmu_data *qdata)
 {
-	struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
 	int id, sites = 0;
 
 	for (id = 0; id < SITES_MAX; id++) {
@@ -123,7 +123,7 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 		sensor->id = id;
 
-		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
+		tzd = devm_thermal_zone_of_sensor_register(dev, id,
 							   sensor,
 							   &tmu_tz_ops);
 		ret = PTR_ERR_OR_ZERO(tzd);
@@ -229,7 +229,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err;
 
-	ret = qoriq_tmu_register_tmu_zone(pdev);
+	ret = qoriq_tmu_register_tmu_zone(dev, data);
 	if (ret < 0) {
 		dev_err(dev, "Failed to register sensors\n");
 		ret = -ENODEV;
-- 
2.21.0

[PATCH v7 06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly

[Andrey Smirnov]

We can simplify error cleanup code if instead of passing a "struct
platform_device *" to qoriq_tmu_calibration() and deriving a bunch of
pointers from it, we pass those pointers directly. This way we won't
be force to call platform_set_drvdata() as early in qoriq_tmu_probe()
and need to have "platform_set_drvdata(pdev, NULL);" in error path.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 5b9f2a31d275..af596c3342d0 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -144,16 +144,16 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 	return 0;
 }
 
-static int qoriq_tmu_calibration(struct platform_device *pdev)
+static int qoriq_tmu_calibration(struct device *dev,
+				 struct qoriq_tmu_data *data)
 {
 	int i, val, len;
 	u32 range[4];
 	const u32 *calibration;
-	struct device_node *np = pdev->dev.of_node;
-	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
+	struct device_node *np = dev->of_node;
 
 	if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
-		dev_err(&pdev->dev, "missing calibration range.\n");
+		dev_err(dev, "missing calibration range.\n");
 		return -ENODEV;
 	}
 
@@ -165,7 +165,7 @@ static int qoriq_tmu_calibration(struct platform_device *pdev)
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
-		dev_err(&pdev->dev, "invalid calibration data.\n");
+		dev_err(dev, "invalid calibration data.\n");
 		return -ENODEV;
 	}
 
@@ -203,8 +203,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, data);
-
 	data->little_endian = of_property_read_bool(np, "little-endian");
 
 	data->regs = devm_platform_ioremap_resource(pdev, 0);
@@ -225,7 +223,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	qoriq_tmu_init_device(data);	/* TMU initialization */
 
-	ret = qoriq_tmu_calibration(pdev);	/* TMU calibration */
+	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
 	if (ret < 0)
 		goto err;
 
@@ -236,11 +234,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	platform_set_drvdata(pdev, data);
+
 	return 0;
 
 err:
 	clk_disable_unprepare(data->clk);
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }
-- 
2.21.0

[PATCH v7 07/12] thermal: qoriq: Drop unnecessary drvdata cleanup

[Andrey Smirnov]

Driver data of underlying struct device will be set to NULL by Linux's
driver infrastructure. Clearing it here is unnecessary.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index af596c3342d0..8a28a4433d44 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -253,8 +253,6 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(data->clk);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 
-- 
2.21.0

[PATCH v7 08/12] thermal: qoriq: Convert driver to use regmap API

[Andrey Smirnov]

Convert driver to use regmap API, drop custom LE/BE IO helpers and
simplify bit manipulation using regmap_update_bits(). This also allows
us to convert some register initialization to use loops and adds
convenient debug access to TMU registers via debugfs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 153 +++++++++++++++-----------------
 1 file changed, 72 insertions(+), 81 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 8a28a4433d44..32bf5ed57f5c 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
@@ -18,48 +19,27 @@
 /*
  * QorIQ TMU Registers
  */
-struct qoriq_tmu_site_regs {
-	u32 tritsr;		/* Immediate Temperature Site Register */
-	u32 tratsr;		/* Average Temperature Site Register */
-	u8 res0[0x8];
-};
 
-struct qoriq_tmu_regs {
-	u32 tmr;		/* Mode Register */
+#define REGS_TMR	0x000	/* Mode Register */
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
-	u32 tsr;		/* Status Register */
-	u32 tmtmir;		/* Temperature measurement interval Register */
+
+#define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
-	u8 res0[0x14];
-	u32 tier;		/* Interrupt Enable Register */
+
+#define REGS_TIER	0x020	/* Interrupt Enable Register */
 #define TIER_DISABLE	0x0
-	u32 tidr;		/* Interrupt Detect Register */
-	u32 tiscr;		/* Interrupt Site Capture Register */
-	u32 ticscr;		/* Interrupt Critical Site Capture Register */
-	u8 res1[0x10];
-	u32 tmhtcrh;		/* High Temperature Capture Register */
-	u32 tmhtcrl;		/* Low Temperature Capture Register */
-	u8 res2[0x8];
-	u32 tmhtitr;		/* High Temperature Immediate Threshold */
-	u32 tmhtatr;		/* High Temperature Average Threshold */
-	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
-	u8 res3[0x24];
-	u32 ttcfgr;		/* Temperature Configuration Register */
-	u32 tscfgr;		/* Sensor Configuration Register */
-	u8 res4[0x78];
-	struct qoriq_tmu_site_regs site[SITES_MAX];
-	u8 res5[0x9f8];
-	u32 ipbrr0;		/* IP Block Revision Register 0 */
-	u32 ipbrr1;		/* IP Block Revision Register 1 */
-	u8 res6[0x310];
-	u32 ttr0cr;		/* Temperature Range 0 Control Register */
-	u32 ttr1cr;		/* Temperature Range 1 Control Register */
-	u32 ttr2cr;		/* Temperature Range 2 Control Register */
-	u32 ttr3cr;		/* Temperature Range 3 Control Register */
-};
 
+#define REGS_TTCFGR	0x080	/* Temperature Configuration Register */
+#define REGS_TSCFGR	0x084	/* Sensor Configuration Register */
+
+#define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
+					    * Site Register
+					    */
+#define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
+					   * Control Register
+					   */
 /*
  * Thermal zone data
  */
@@ -68,9 +48,8 @@ struct qoriq_sensor {
 };
 
 struct qoriq_tmu_data {
-	struct qoriq_tmu_regs __iomem *regs;
+	struct regmap *regmap;
 	struct clk *clk;
-	bool little_endian;
 	struct qoriq_sensor	sensor[SITES_MAX];
 };
 
@@ -79,29 +58,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
 	return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
 }
 
-static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
-{
-	if (p->little_endian)
-		iowrite32(val, addr);
-	else
-		iowrite32be(val, addr);
-}
-
-static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
-{
-	if (p->little_endian)
-		return ioread32(addr);
-	else
-		return ioread32be(addr);
-}
-
 static int tmu_get_temp(void *p, int *temp)
 {
 	struct qoriq_sensor *qsensor = p;
 	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
 
-	val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
+	regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
 	*temp = (val & 0xff) * 1000;
 
 	return 0;
@@ -139,7 +102,8 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 
 	/* Enable monitoring */
 	if (sites != 0)
-		tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+		regmap_write(qdata->regmap, REGS_TMR,
+			     sites | TMR_ME | TMR_ALPF);
 
 	return 0;
 }
@@ -158,10 +122,8 @@ static int qoriq_tmu_calibration(struct device *dev,
 	}
 
 	/* Init temperature range registers */
-	tmu_write(data, range[0], &data->regs->ttr0cr);
-	tmu_write(data, range[1], &data->regs->ttr1cr);
-	tmu_write(data, range[2], &data->regs->ttr2cr);
-	tmu_write(data, range[3], &data->regs->ttr3cr);
+	for (i = 0; i < ARRAY_SIZE(range); i++)
+		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
@@ -171,9 +133,9 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	for (i = 0; i < len; i += 8, calibration += 2) {
 		val = of_read_number(calibration, 1);
-		tmu_write(data, val, &data->regs->ttcfgr);
+		regmap_write(data->regmap, REGS_TTCFGR, val);
 		val = of_read_number(calibration + 1, 1);
-		tmu_write(data, val, &data->regs->tscfgr);
+		regmap_write(data->regmap, REGS_TSCFGR, val);
 	}
 
 	return 0;
@@ -182,33 +144,68 @@ static int qoriq_tmu_calibration(struct device *dev,
 static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 {
 	/* Disable interrupt, using polling instead */
-	tmu_write(data, TIER_DISABLE, &data->regs->tier);
+	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
 
 	/* Set update_interval */
-	tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+	regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 }
 
+static const struct regmap_range qoriq_yes_ranges[] = {
+	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
+	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
+	/* Read only registers below */
+	regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
+};
+
+static const struct regmap_access_table qoriq_wr_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges) - 1,
+};
+
+static const struct regmap_access_table qoriq_rd_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges),
+};
+
 static int qoriq_tmu_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct qoriq_tmu_data *data;
 	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
+	const bool little_endian = of_property_read_bool(np, "little-endian");
+	const enum regmap_endian format_endian =
+		little_endian ? REGMAP_ENDIAN_LITTLE : REGMAP_ENDIAN_BIG;
+	const struct regmap_config regmap_config = {
+		.reg_bits		= 32,
+		.val_bits		= 32,
+		.reg_stride		= 4,
+		.rd_table		= &qoriq_rd_table,
+		.wr_table		= &qoriq_wr_table,
+		.val_format_endian	= format_endian,
+		.max_register		= SZ_4K,
+	};
+	void __iomem *base;
 
 	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	data->little_endian = of_property_read_bool(np, "little-endian");
-
-	data->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(data->regs)) {
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base)) {
 		dev_err(dev, "Failed to get memory region\n");
-		return PTR_ERR(data->regs);
+		return PTR_ERR(base);
+	}
+
+	data->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	ret = PTR_ERR_OR_ZERO(data->regmap);
+	if (ret) {
+		dev_err(dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
 	}
 
 	data->clk = devm_clk_get_optional(dev, NULL);
@@ -249,7 +246,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 
 	clk_disable_unprepare(data->clk);
 
@@ -258,13 +255,12 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 
 static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
 {
-	u32 tmr;
 	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+	int ret;
 
-	/* Disable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr &= ~TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
+	ret = regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, 0);
+	if (ret)
+		return ret;
 
 	clk_disable_unprepare(data->clk);
 
@@ -273,7 +269,6 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
 
 static int __maybe_unused qoriq_tmu_resume(struct device *dev)
 {
-	u32 tmr;
 	int ret;
 	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
 
@@ -282,11 +277,7 @@ static int __maybe_unused qoriq_tmu_resume(struct device *dev)
 		return ret;
 
 	/* Enable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr |= TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
-
-	return 0;
+	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME);
 }
 
 static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
-- 
2.21.0

[PATCH v7 09/12] thermal: qoriq: Enable all sensors before registering them

[Andrey Smirnov]

Tmu_get_temp will get called as a part of sensor registration via
devm_thermal_zone_of_sensor_register(). To prevent it from retruning
bogus data we need to enable sensor monitoring before that. Looking at
the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in
enabling them all, so, for the sake of simplicity, change the code to
do just that.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 32bf5ed57f5c..1cc53a4a5c47 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -24,6 +24,7 @@
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
+#define TMR_MSITE_ALL	GENMASK(15, 0)
 
 #define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
@@ -77,7 +78,10 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
 static int qoriq_tmu_register_tmu_zone(struct device *dev,
 				       struct qoriq_tmu_data *qdata)
 {
-	int id, sites = 0;
+	int id;
+
+	regmap_write(qdata->regmap, REGS_TMR,
+		     TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
@@ -93,18 +97,12 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 		if (ret) {
 			if (ret == -ENODEV)
 				continue;
-			else
-				return ret;
-		}
 
-		sites |= 0x1 << (15 - id);
+			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
+			return ret;
+		}
 	}
 
-	/* Enable monitoring */
-	if (sites != 0)
-		regmap_write(qdata->regmap, REGS_TMR,
-			     sites | TMR_ME | TMR_ALPF);
-
 	return 0;
 }
 
-- 
2.21.0

[PATCH v7 10/12] thermal: qoriq: Do not report invalid temperature reading

[Andrey Smirnov]

Before returning measured temperature data to upper layer we need to
make sure that the reading was marked as "valid" to avoid reporting
bogus data.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 1cc53a4a5c47..48853192514a 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -38,6 +38,7 @@
 #define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
 					    * Site Register
 					    */
+#define TRITSR_V	BIT(31)
 #define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
 					   * Control Register
 					   */
@@ -64,8 +65,24 @@ static int tmu_get_temp(void *p, int *temp)
 	struct qoriq_sensor *qsensor = p;
 	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
+	/*
+	 * REGS_TRITSR(id) has the following layout:
+	 *
+	 * 31  ... 7 6 5 4 3 2 1 0
+	 *  V          TEMP
+	 *
+	 * Where V bit signifies if the measurement is ready and is
+	 * within sensor range. TEMP is an 8 bit value representing
+	 * temperature in C.
+	 */
+	if (regmap_read_poll_timeout(qdata->regmap,
+				     REGS_TRITSR(qsensor->id),
+				     val,
+				     val & TRITSR_V,
+				     USEC_PER_MSEC,
+				     10 * USEC_PER_MSEC))
+		return -ENODATA;
 
-	regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
 	*temp = (val & 0xff) * 1000;
 
 	return 0;
-- 
2.21.0

[PATCH v7 11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()

[Andrey Smirnov]

Add devres wrapper for thermal_add_hwmon_sysfs() to simplify driver
code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/thermal_hwmon.c | 28 ++++++++++++++++++++++++++++
 drivers/thermal/thermal_hwmon.h |  7 +++++++
 2 files changed, 35 insertions(+)

diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index dd5d8ee37928..c8d2620f2e42 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -248,3 +248,31 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 	kfree(hwmon);
 }
 EXPORT_SYMBOL_GPL(thermal_remove_hwmon_sysfs);
+
+static void devm_thermal_hwmon_release(struct device *dev, void *res)
+{
+	thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
+}
+
+int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	struct thermal_zone_device **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_thermal_hwmon_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = thermal_add_hwmon_sysfs(tz);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = tz;
+	devres_add(&tz->device, ptr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_add_hwmon_sysfs);
diff --git a/drivers/thermal/thermal_hwmon.h b/drivers/thermal/thermal_hwmon.h
index a160b9d62dd0..1a9d65f6a6a8 100644
--- a/drivers/thermal/thermal_hwmon.h
+++ b/drivers/thermal/thermal_hwmon.h
@@ -17,6 +17,7 @@
 
 #ifdef CONFIG_THERMAL_HWMON
 int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
+int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
 void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
 #else
 static inline int
@@ -25,6 +26,12 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	return 0;
 }
 
+static inline int
+devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+
 static inline void
 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 {
-- 
2.21.0

[PATCH v7 12/12] thermal: qoriq: Add hwmon support

[Andrey Smirnov]

Expose thermal readings as a HWMON device, so that it could be
accessed using lm-sensors.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/thermal/qoriq_thermal.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 48853192514a..e907f0d2103f 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -13,6 +13,7 @@
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
+#include "thermal_hwmon.h"
 
 #define SITES_MAX	16
 
@@ -118,6 +119,11 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
 			return ret;
 		}
+
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(dev,
+				 "Failed to add hwmon sysfs attributes\n");
+
 	}
 
 	return 0;
-- 
2.21.0

Re: [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[Lucas Stach]

Hi all,

can this series be considered for mainline inclusion? It has been
tested and works well in our i.MX8M kernel setup.

Regards,
Lucas

On Mi, 2019-09-11 at 18:29 -0700, Andrey Smirnov wrote:
> Everyone:
> 
> This series contains patches adding support for HWMON integration, bug
> fixes and general improvements (hopefully) for TMU driver I made while
> working on it on i.MX8MQ.
> 
> Feedback is welcome!
> 
> Thanks,
> Andrey Smirnov
> 
> Changes since [v6]:
> 
>    - Rebased on top of Zhang's "next" branch
> 
>    - Added "thermal: qoriq: Drop unnecessary drvdata cleanup"
> 
> Changes since [v5]
> 
>     - Rebased on recent linux-next, dropped "thermal: qoriq: Remove
>       unnecessary DT node is NULL check" since it is already in the
>       tree
> 
>     - Dropped dependency on [rfc]
> 
> Changes since [v4]
> 
>     - Collected Tested-by from Lucas
>     
>     - Collected Reviewed-by from Daniel
> 
>     - Converted "thermal: qoriq: Enable all sensors before registering
>       them" to use if instead of switch statement for error checking
> 
> Changes since [v3]
> 
>     - Series reabse on top of [rfc]
>     
>     - Fixed incorrect goto label in "thermal: qoriq: Pass data to
>       qoriq_tmu_calibration()"
>       
>     - Added REGS_TRITSR() register description to "thermal: qoriq: Do
>       not report invalid temperature reading"
>       
>     - Reworded commit message of "thermal: qoriq: Remove unnecessary
>       DT node is NULL check"
> 
> Changes since [v2]
> 
>     - Patches rebased on v5.1-rc1
> 
> Changes since [v1]
> 
>     - Rebased on "linus" branch of
>       git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
>       that included latest chagnes adding multi-sensors support
> 
>     - Dropped
> 
> 	thermal: qoriq: Add support for multiple thremal sites
> 	thermal: qoriq: Be more strict when parsing
> 	thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
> 
>       since they are no longer relevant
> 
>     - Added
> 
> 	thermal: qoriq: Don't store struct thermal_zone_device reference
> 	thermal: qoriq: Add local struct qoriq_sensor pointer
> 	thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
> 	thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
> 
>       to simplify latest codebase
> 
>     - Changed "thermal: qoriq: Do not report invalid temperature
>       reading" to use regmap_read_poll_timeout() to make sure that
>       tmu_get_temp() waits for fist sample to be ready before
>       reporting it. This case is triggered on my setup if
>       qoriq_thermal is compiled as a module
> 
> [v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@gmail.com
> [v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com
> [v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@gmail.com
> [v4] lore.kernel.org/lkml/20190413082748.29990-1-andrew.smirnov@gmail.com
> [v5] lore.kernel.org/lkml/20190424064830.18179-1-andrew.smirnov@gmail.com
> [v6] lore.kernel.org/lkml/20190821012612.7823-1-andrew.smirnov@gmail.com
> [rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@linaro.org
> 
> Andrey Smirnov (12):
>   thermal: qoriq: Add local struct device pointer
>   thermal: qoriq: Don't store struct thermal_zone_device reference
>   thermal: qoriq: Add local struct qoriq_sensor pointer
>   thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
>   thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
>   thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
>   thermal: qoriq: Drop unnecessary drvdata cleanup
>   thermal: qoriq: Convert driver to use regmap API
>   thermal: qoriq: Enable all sensors before registering them
>   thermal: qoriq: Do not report invalid temperature reading
>   thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
>   thermal: qoriq: Add hwmon support
> 
>  drivers/thermal/qoriq_thermal.c | 252 +++++++++++++++++---------------
>  drivers/thermal/thermal_hwmon.c |  28 ++++
>  drivers/thermal/thermal_hwmon.h |   7 +
>  3 files changed, 167 insertions(+), 120 deletions(-)
> 

Re: [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[Daniel Lezcano]

Hi Luca,

On 06/12/2019 12:46, Lucas Stach wrote:
> Hi all,
> 
> can this series be considered for mainline inclusion? It has been
> tested and works well in our i.MX8M kernel setup.

thanks for the reminder. I'll take care of it soon.


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[Daniel Lezcano]

Hi Lucas,


On 06/12/2019 12:46, Lucas Stach wrote:
> Hi all,
> 
> can this series be considered for mainline inclusion? It has been 
> tested and works well in our i.MX8M kernel setup.

I'm fine with the changes but the series does not longer apply. I tried
to solve the conflicts but got too many of them.

Is it possible to respin the series?




-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[Andrey Smirnov]

On Mon, Dec 9, 2019 at 10:20 AM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> Hi Lucas,
>
>
> On 06/12/2019 12:46, Lucas Stach wrote:
> > Hi all,
> >
> > can this series be considered for mainline inclusion? It has been
> > tested and works well in our i.MX8M kernel setup.
>
> I'm fine with the changes but the series does not longer apply. I tried
> to solve the conflicts but got too many of them.
>
> Is it possible to respin the series?
>

Yeah, no problem. Will do.

Thanks,
Andrey Smirnov

Re: [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support

[Daniel Lezcano]

On 09/12/2019 19:49, Andrey Smirnov wrote:
> On Mon, Dec 9, 2019 at 10:20 AM Daniel Lezcano
> <daniel.lezcano@linaro.org> wrote:
>>
>> Hi Lucas,
>>
>>
>> On 06/12/2019 12:46, Lucas Stach wrote:
>>> Hi all,
>>>
>>> can this series be considered for mainline inclusion? It has been
>>> tested and works well in our i.MX8M kernel setup.
>>
>> I'm fine with the changes but the series does not longer apply. I tried
>> to solve the conflicts but got too many of them.
>>
>> Is it possible to respin the series?
>>
> 
> Yeah, no problem. Will do.

Thanks and sorry for the delay.



-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog