Hi,

On Wed, Oct 02, 2019 at 07:25:44PM +0800, Icenowy Zheng wrote:
> The AXP813 PMIC has support for detection of USB Battery Charging
> specification, and it will limit the current to 500mA by default when
> the detection is not enabled or the detection result is SDP.
> 
> Enable the BC detection to allow correctly selection of the current.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---

Thanks, queued to power-supply-next.

-- Sebastian

>  drivers/power/supply/axp20x_usb_power.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
> index dc4c316eff81..5f0a5722b19e 100644
> --- a/drivers/power/supply/axp20x_usb_power.c
> +++ b/drivers/power/supply/axp20x_usb_power.c
> @@ -48,6 +48,8 @@
>  
>  #define AXP20X_VBUS_MON_VBUS_VALID	BIT(3)
>  
> +#define AXP813_BC_EN		BIT(0)
> +
>  /*
>   * Note do not raise the debounce time, we must report Vusb high within
>   * 100ms otherwise we get Vbus errors in musb.
> @@ -495,6 +497,12 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> +	if (power->axp20x_id == AXP813_ID) {
> +		/* Enable USB Battery Charging specification detection */
> +		regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
> +				   AXP813_BC_EN, AXP813_BC_EN);
> +	}
> +
>  	psy_cfg.of_node = pdev->dev.of_node;
>  	psy_cfg.drv_data = power;
>  
> -- 
> 2.21.0
>