Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 4.19 357/671] thermal: rcar_gen3_thermal: fix interrupt type
       [not found] <20200116170509.12787-1-sashal@kernel.org>
@ 2020-01-16 16:59 ` Sasha Levin
  2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 358/671] thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power Sasha Levin
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-01-16 16:59 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jiada Wang, Simon Horman, Daniel Lezcano, Eduardo Valentin,
	Sasha Levin, linux-pm

From: Jiada Wang <jiada_wang@mentor.com>

[ Upstream commit 2c0928c9e004589dc9e7672c40a38d6c4ca12701 ]

Currently IRQF_SHARED type interrupt line is allocated, but it
is not appropriate, as the interrupt line isn't shared between
different devices, instead IRQF_ONESHOT is the proper type.

By changing interrupt type to IRQF_ONESHOT, now irq handler is
no longer needed, as clear of interrupt status can be done in
threaded interrupt context.

Because IRQF_ONESHOT type interrupt line is kept disabled until
the threaded handler has been run, so there is no need to protect
read/write of REG_GEN3_IRQSTR with lock.

Fixes: 7d4b269776ec6 ("enable hardware interrupts for trip points")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/rcar_gen3_thermal.c | 38 +++++------------------------
 1 file changed, 6 insertions(+), 32 deletions(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 704c8ad045bb..8f553453dd7f 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -14,7 +14,6 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/spinlock.h>
 #include <linux/sys_soc.h>
 #include <linux/thermal.h>
 
@@ -81,7 +80,6 @@ struct rcar_gen3_thermal_tsc {
 struct rcar_gen3_thermal_priv {
 	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
 	unsigned int num_tscs;
-	spinlock_t lock; /* Protect interrupts on and off */
 	void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
 };
 
@@ -231,38 +229,16 @@ static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
 {
 	struct rcar_gen3_thermal_priv *priv = data;
 	u32 status;
-	int i, ret = IRQ_HANDLED;
+	int i;
 
-	spin_lock(&priv->lock);
 	for (i = 0; i < priv->num_tscs; i++) {
 		status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
 		rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
 		if (status)
-			ret = IRQ_WAKE_THREAD;
+			thermal_zone_device_update(priv->tscs[i]->zone,
+						   THERMAL_EVENT_UNSPECIFIED);
 	}
 
-	if (ret == IRQ_WAKE_THREAD)
-		rcar_thermal_irq_set(priv, false);
-
-	spin_unlock(&priv->lock);
-
-	return ret;
-}
-
-static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, void *data)
-{
-	struct rcar_gen3_thermal_priv *priv = data;
-	unsigned long flags;
-	int i;
-
-	for (i = 0; i < priv->num_tscs; i++)
-		thermal_zone_device_update(priv->tscs[i]->zone,
-					   THERMAL_EVENT_UNSPECIFIED);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rcar_thermal_irq_set(priv, true);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return IRQ_HANDLED;
 }
 
@@ -364,8 +340,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	if (soc_device_match(r8a7795es1))
 		priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1;
 
-	spin_lock_init(&priv->lock);
-
 	platform_set_drvdata(pdev, priv);
 
 	/*
@@ -383,9 +357,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		if (!irqname)
 			return -ENOMEM;
 
-		ret = devm_request_threaded_irq(dev, irq, rcar_gen3_thermal_irq,
-						rcar_gen3_thermal_irq_thread,
-						IRQF_SHARED, irqname, priv);
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+						rcar_gen3_thermal_irq,
+						IRQF_ONESHOT, irqname, priv);
 		if (ret)
 			return ret;
 	}
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH AUTOSEL 4.19 358/671] thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power
       [not found] <20200116170509.12787-1-sashal@kernel.org>
  2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 357/671] thermal: rcar_gen3_thermal: fix interrupt type Sasha Levin
@ 2020-01-16 16:59 ` Sasha Levin
  2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 394/671] cpufreq: brcmstb-avs-cpufreq: Fix initial command check Sasha Levin
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-01-16 16:59 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Matthias Kaehlcke, Daniel Lezcano, Javi Merino, Viresh Kumar,
	Eduardo Valentin, Sasha Levin, linux-pm

From: Matthias Kaehlcke <mka@chromium.org>

[ Upstream commit bf45ac18b78038e43af3c1a273cae4ab5704d2ce ]

The CPU load values passed to the thermal_power_cpu_get_power
tracepoint are zero for all CPUs, unless, unless the
thermal_power_cpu_limit tracepoint is enabled too:

  irq/41-rockchip-98    [000] ....   290.972410: thermal_power_cpu_get_power:
  cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815

vs

  irq/41-rockchip-96    [000] ....    95.773585: thermal_power_cpu_get_power:
  cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959
  irq/41-rockchip-96    [000] ....    95.773596: thermal_power_cpu_limit:
  cpus=0000000f freq=408000 cdev_state=10 power=416

There seems to be no good reason for omitting the CPU load information
depending on another tracepoint. My guess is that the intention was to
check whether thermal_power_cpu_get_power is (still) enabled, however
'load_cpu != NULL' already indicates that it was at least enabled when
cpufreq_get_requested_power() was entered, there seems little gain
from omitting the assignment if the tracepoint was just disabled, so
just remove the check.

Fixes: 6828a4711f99 ("thermal: add trace events to the power allocator governor")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Javi Merino <javi.merino@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/cpu_cooling.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index dfd23245f778..9df6b7260466 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -458,7 +458,7 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
 			load = 0;
 
 		total_load += load;
-		if (trace_thermal_power_cpu_limit_enabled() && load_cpu)
+		if (load_cpu)
 			load_cpu[i] = load;
 
 		i++;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH AUTOSEL 4.19 394/671] cpufreq: brcmstb-avs-cpufreq: Fix initial command check
       [not found] <20200116170509.12787-1-sashal@kernel.org>
  2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 357/671] thermal: rcar_gen3_thermal: fix interrupt type Sasha Levin
  2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 358/671] thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power Sasha Levin
@ 2020-01-16 17:00 ` Sasha Levin
  2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 395/671] cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency Sasha Levin
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-01-16 17:00 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Florian Fainelli, Markus Mayer, Viresh Kumar, Sasha Levin,
	linux-pm, linux-arm-kernel

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 22a26cc6a51ef73dcfeb64c50513903f6b2d53d8 ]

There is a logical error in brcm_avs_is_firmware_loaded() whereby if the
firmware returns -EINVAL, we will be reporting this as an error. The
comment is correct, the code was not.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/brcmstb-avs-cpufreq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index e6f9cbe5835f..6ed53ca8aa98 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -446,8 +446,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 	rc = brcm_avs_get_pmap(priv, NULL);
 	magic = readl(priv->base + AVS_MBOX_MAGIC);
 
-	return (magic == AVS_FIRMWARE_MAGIC) && (rc != -ENOTSUPP) &&
-		(rc != -EINVAL);
+	return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) ||
+		(rc != -EINVAL));
 }
 
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH AUTOSEL 4.19 395/671] cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
       [not found] <20200116170509.12787-1-sashal@kernel.org>
                   ` (2 preceding siblings ...)
  2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 394/671] cpufreq: brcmstb-avs-cpufreq: Fix initial command check Sasha Levin
@ 2020-01-16 17:00 ` Sasha Levin
  2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 467/671] PM: sleep: Fix possible overflow in pm_system_cancel_wakeup() Sasha Levin
  2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 516/671] power: supply: Init device wakeup after device_add() Sasha Levin
  5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-01-16 17:00 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Florian Fainelli, Markus Mayer, Viresh Kumar, Sasha Levin,
	linux-pm, linux-arm-kernel

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 4c5681fcc684c762b09435de3e82ffeee7769d21 ]

What we read back from the register is going to be capped at 32-bits,
and cpufreq_freq_table.frequency is an unsigned int. Avoid any possible
value truncation by using the appropriate return value.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/brcmstb-avs-cpufreq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index 6ed53ca8aa98..77b0e5d0fb13 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -384,12 +384,12 @@ static int brcm_avs_set_pstate(struct private_data *priv, unsigned int pstate)
 	return __issue_avs_command(priv, AVS_CMD_SET_PSTATE, true, args);
 }
 
-static unsigned long brcm_avs_get_voltage(void __iomem *base)
+static u32 brcm_avs_get_voltage(void __iomem *base)
 {
 	return readl(base + AVS_MBOX_VOLTAGE1);
 }
 
-static unsigned long brcm_avs_get_frequency(void __iomem *base)
+static u32 brcm_avs_get_frequency(void __iomem *base)
 {
 	return readl(base + AVS_MBOX_FREQUENCY) * 1000;	/* in kHz */
 }
@@ -653,14 +653,14 @@ static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf)
 {
 	struct private_data *priv = policy->driver_data;
 
-	return sprintf(buf, "0x%08lx\n", brcm_avs_get_voltage(priv->base));
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_voltage(priv->base));
 }
 
 static ssize_t show_brcm_avs_frequency(struct cpufreq_policy *policy, char *buf)
 {
 	struct private_data *priv = policy->driver_data;
 
-	return sprintf(buf, "0x%08lx\n", brcm_avs_get_frequency(priv->base));
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_frequency(priv->base));
 }
 
 cpufreq_freq_attr_ro(brcm_avs_pstate);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH AUTOSEL 4.19 467/671] PM: sleep: Fix possible overflow in pm_system_cancel_wakeup()
       [not found] <20200116170509.12787-1-sashal@kernel.org>
                   ` (3 preceding siblings ...)
  2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 395/671] cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency Sasha Levin
@ 2020-01-16 17:01 ` Sasha Levin
  2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 516/671] power: supply: Init device wakeup after device_add() Sasha Levin
  5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-01-16 17:01 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rafael J. Wysocki, Thomas Gleixner, Sasha Levin, linux-pm

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 2933954b71f10d392764f95eec0f0aa2d103054b ]

It is not actually guaranteed that pm_abort_suspend will be
nonzero when pm_system_cancel_wakeup() is called which may lead to
subtle issues, so make it use atomic_dec_if_positive() instead of
atomic_dec() for the safety sake.

Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/power/wakeup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 7c84f64c74f7..2dfa2e048745 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -875,7 +875,7 @@ EXPORT_SYMBOL_GPL(pm_system_wakeup);
 
 void pm_system_cancel_wakeup(void)
 {
-	atomic_dec(&pm_abort_suspend);
+	atomic_dec_if_positive(&pm_abort_suspend);
 }
 
 void pm_wakeup_clear(bool reset)
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH AUTOSEL 4.19 516/671] power: supply: Init device wakeup after device_add()
       [not found] <20200116170509.12787-1-sashal@kernel.org>
                   ` (4 preceding siblings ...)
  2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 467/671] PM: sleep: Fix possible overflow in pm_system_cancel_wakeup() Sasha Levin
@ 2020-01-16 17:02 ` Sasha Levin
  5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-01-16 17:02 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Stephen Boyd, Greg Kroah-Hartman, Tri Vo, Kalesh Singh,
	Ravi Chandra Sadineni, Viresh Kumar, Rafael J . Wysocki,
	Sebastian Reichel, Sasha Levin, linux-pm

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 8288022284859acbcc3cf1a073a1e2692d6c2543 ]

We may want to use the device pointer in device_init_wakeup() with
functions that expect the device to already be added with device_add().
For example, if we were to link the device initializing wakeup to
something in sysfs such as a class for wakeups we'll run into an error.
It looks like this code was written with the assumption that the device
would be added before initializing wakeup due to the order of operations
in power_supply_unregister().

Let's change the order of operations so we don't run into problems here.

Fixes: 948dcf966228 ("power_supply: Prevent suspend until power supply events are processed")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tri Vo <trong@android.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/power_supply_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index e85361878450..e43a7b3b570c 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -902,14 +902,14 @@ __power_supply_register(struct device *parent,
 	}
 
 	spin_lock_init(&psy->changed_lock);
-	rc = device_init_wakeup(dev, ws);
-	if (rc)
-		goto wakeup_init_failed;
-
 	rc = device_add(dev);
 	if (rc)
 		goto device_add_failed;
 
+	rc = device_init_wakeup(dev, ws);
+	if (rc)
+		goto wakeup_init_failed;
+
 	rc = psy_register_thermal(psy);
 	if (rc)
 		goto register_thermal_failed;
@@ -946,8 +946,8 @@ __power_supply_register(struct device *parent,
 	psy_unregister_thermal(psy);
 register_thermal_failed:
 	device_del(dev);
-device_add_failed:
 wakeup_init_failed:
+device_add_failed:
 check_supplies_failed:
 dev_set_name_failed:
 	put_device(dev);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200116170509.12787-1-sashal@kernel.org>
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 357/671] thermal: rcar_gen3_thermal: fix interrupt type Sasha Levin
2020-01-16 16:59 ` [PATCH AUTOSEL 4.19 358/671] thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 394/671] cpufreq: brcmstb-avs-cpufreq: Fix initial command check Sasha Levin
2020-01-16 17:00 ` [PATCH AUTOSEL 4.19 395/671] cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency Sasha Levin
2020-01-16 17:01 ` [PATCH AUTOSEL 4.19 467/671] PM: sleep: Fix possible overflow in pm_system_cancel_wakeup() Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 516/671] power: supply: Init device wakeup after device_add() Sasha Levin

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git