Hi,

I expect, that Lee will provide an immutable branch for me and
Jonathan once the MFD bits have been reviewed. Please tell me,
if I should prepare one instead.

-- Sebastian

On Thu, Apr 30, 2020 at 05:58:04PM +0200, Saravanan Sekar wrote:
> changes in v11:
>  - module_remove part replaced by devm_add_action_or_reset in charger patch
>  - minor review comments solved in mfd and adc patch
> 
> changes in v10:
>  - fixed typo, \n in dev_err
>  - dt bindings Warning (unit_address_vs_reg) reported by bot
> 
> changes in v9:
>  - fixed review comments in mp2629 power supply such as resource based
>    iio channel, replace workqueue by threaded irq, irq get with "_optional"
> 
> changes in v8:
>  - fixed order of call in probe/remove in iio adc
>  - add ABI documentation for mp2629 power supply
> 
> changes in v7:
>  - fixed probe/remove order, managed and unmanaged call mix use in adc.
>  - Documentation dual license, i2c node with controller address
> 
> Overall looks good to me, FWIW,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
> One question though in reply to patch 4.
> 
> changes in v6:
>  - removed includes types.h in mfd, of_device.h in adc.
>  - fixed review comments parentheses, err check, kstrtouint
> 
> changes in v5:
>  - removed platfrom data stored in mfd and directly accessed mfd struct in child
>  - fixed spell check and capitalization in mfd and documentation
> 
> changes in v4:
>  - fixed capitalization in mfg Kconfig and documentation
> 
> changes in v3:
>  - regmap for children passed using platform data and remove mfd driver info
>    access directly from children
> 
> changes in v2:
>  - removed EXPORT_SYMBOL of register set/get helper
>  - regmap bit filed used, fixed other review comments
> 
> This patch series add support for Battery charger control driver for Monolithic
> Power System's MP2629 chipset, includes MFD driver for ADC battery & input
> power supply measurement and battery charger control driver.
> 
> Thanks,
> Saravanan
> 
> Saravanan Sekar (6):
>   dt-bindings: mfd: add document bindings for mp2629
>   mfd: mp2629: Add support for mps battery charger
>   iio: adc: mp2629: Add support for mp2629 ADC driver
>   power: supply: Add support for mps mp2629 battery charger
>   power: supply: mp2629: Add impedance compensation config
>   MAINTAINERS: Add entry for mp2629 Battery Charger driver
> 
>  .../ABI/testing/sysfs-class-power-mp2629      |   8 +
>  .../devicetree/bindings/mfd/mps,mp2629.yaml   |  62 ++
>  MAINTAINERS                                   |   5 +
>  drivers/iio/adc/Kconfig                       |  10 +
>  drivers/iio/adc/Makefile                      |   1 +
>  drivers/iio/adc/mp2629_adc.c                  | 208 ++++++
>  drivers/mfd/Kconfig                           |   9 +
>  drivers/mfd/Makefile                          |   2 +
>  drivers/mfd/mp2629.c                          |  79 +++
>  drivers/power/supply/Kconfig                  |  10 +
>  drivers/power/supply/Makefile                 |   1 +
>  drivers/power/supply/mp2629_charger.c         | 669 ++++++++++++++++++
>  include/linux/mfd/mp2629.h                    |  26 +
>  13 files changed, 1090 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
>  create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
>  create mode 100644 drivers/iio/adc/mp2629_adc.c
>  create mode 100644 drivers/mfd/mp2629.c
>  create mode 100644 drivers/power/supply/mp2629_charger.c
>  create mode 100644 include/linux/mfd/mp2629.h
> 
> -- 
> 2.17.1
>