Re: [PATCH 06/12] xen-blkfront: add callbacks for PM suspend and hibernation]

* Re: [PATCH 06/12] xen-blkfront: add callbacks for PM suspend and hibernation]
@ 2020-06-03 23:33 Agarwal, Anchal
  2020-06-04  7:05 ` Roger Pau Monné
  0 siblings, 1 reply; 14+ messages in thread
From: Agarwal, Anchal @ 2020-06-03 23:33 UTC (permalink / raw)
  To: Boris Ostrovsky, tglx, mingo, bp, hpa, x86, jgross, linux-pm,
	linux-mm, Kamata, Munehisa, sstabellini, konrad.wilk, roger.pau,
	axboe, davem, rjw, len.brown, pavel, peterz, Valentin, Eduardo,
	Singh, Balbir, xen-devel, vkuznets, netdev, linux-kernel,
	Woodhouse, David, benh

 CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you can confirm the sender and know the content is safe.

    On Tue, May 19, 2020 at 11:27:50PM +0000, Anchal Agarwal wrote:
    > From: Munehisa Kamata <kamatam@amazon.com>
    > 
    > S4 power transition states are much different than xen
    > suspend/resume. Former is visible to the guest and frontend drivers should
    > be aware of the state transitions and should be able to take appropriate
    > actions when needed. In transition to S4 we need to make sure that at least
    > all the in-flight blkif requests get completed, since they probably contain
    > bits of the guest's memory image and that's not going to get saved any
    > other way. Hence, re-issuing of in-flight requests as in case of xen resume
    > will not work here. This is in contrast to xen-suspend where we need to
    > freeze with as little processing as possible to avoid dirtying RAM late in
    > the migration cycle and we know that in-flight data can wait.
    > 
    > Add freeze, thaw and restore callbacks for PM suspend and hibernation
    > support. All frontend drivers that needs to use PM_HIBERNATION/PM_SUSPEND
    > events, need to implement these xenbus_driver callbacks. The freeze handler
    > stops block-layer queue and disconnect the frontend from the backend while
    > freeing ring_info and associated resources. Before disconnecting from the
    > backend, we need to prevent any new IO from being queued and wait for existing
    > IO to complete. Freeze/unfreeze of the queues will guarantee that there are no
    > requests in use on the shared ring. However, for sanity we should check
    > state of the ring before disconnecting to make sure that there are no
    > outstanding requests to be processed on the ring. The restore handler
    > re-allocates ring_info, unquiesces and unfreezes the queue and re-connect to
    > the backend, so that rest of the kernel can continue to use the block device
    > transparently.
    > 
    > Note:For older backends,if a backend doesn't have commit'12ea729645ace'
    > xen/blkback: unmap all persistent grants when frontend gets disconnected,
    > the frontend may see massive amount of grant table warning when freeing
    > resources.
    > [   36.852659] deferring g.e. 0xf9 (pfn 0xffffffffffffffff)
    > [   36.855089] xen:grant_table: WARNING:e.g. 0x112 still in use!
    > 
    > In this case, persistent grants would need to be disabled.
    > 
    > [Anchal Changelog: Removed timeout/request during blkfront freeze.
    > Reworked the whole patch to work with blk-mq and incorporate upstream's
    > comments]

    Please tag versions using vX and it would be helpful if you could list
    the specific changes that you performed between versions. There where
    3 RFC versions IIRC, and there's no log of the changes between them.

I will elaborate on "upstream's comments" in my changelog in my next round of patches.
    > 
    > Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
    > Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
    > ---
    >  drivers/block/xen-blkfront.c | 122 +++++++++++++++++++++++++++++++++--
    >  1 file changed, 115 insertions(+), 7 deletions(-)
    > 
    > diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
    > index 3b889ea950c2..464863ed7093 100644
    > --- a/drivers/block/xen-blkfront.c
    > +++ b/drivers/block/xen-blkfront.c
    > @@ -48,6 +48,8 @@
    >  #include <linux/list.h>
    >  #include <linux/workqueue.h>
    >  #include <linux/sched/mm.h>
    > +#include <linux/completion.h>
    > +#include <linux/delay.h>
    > 
    >  #include <xen/xen.h>
    >  #include <xen/xenbus.h>
    > @@ -80,6 +82,8 @@ enum blkif_state {
    >       BLKIF_STATE_DISCONNECTED,
    >       BLKIF_STATE_CONNECTED,
    >       BLKIF_STATE_SUSPENDED,
    > +     BLKIF_STATE_FREEZING,
    > +     BLKIF_STATE_FROZEN

    Nit: adding a terminating ',' would prevent further additions from
    having to modify this line.
ACK.
    >  };
    > 
    >  struct grant {
    > @@ -219,6 +223,7 @@ struct blkfront_info
    >       struct list_head requests;
    >       struct bio_list bio_list;
    >       struct list_head info_list;
    > +     struct completion wait_backend_disconnected;
    >  };
    > 
    >  static unsigned int nr_minors;
    > @@ -1005,6 +1010,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size,
    >       info->sector_size = sector_size;
    >       info->physical_sector_size = physical_sector_size;
    >       blkif_set_queue_limits(info);
    > +     init_completion(&info->wait_backend_disconnected);
    > 
    >       return 0;
    >  }
    > @@ -1057,7 +1063,7 @@ static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
    >               case XEN_SCSI_DISK5_MAJOR:
    >               case XEN_SCSI_DISK6_MAJOR:
    >               case XEN_SCSI_DISK7_MAJOR:
    > -                     *offset = (*minor / PARTS_PER_DISK) +
    > +                     *offset = (*minor / PARTS_PER_DISK) +
    >                               ((major - XEN_SCSI_DISK1_MAJOR + 1) * 16) +
    >                               EMULATED_SD_DISK_NAME_OFFSET;
    >                       *minor = *minor +
    > @@ -1072,7 +1078,7 @@ static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
    >               case XEN_SCSI_DISK13_MAJOR:
    >               case XEN_SCSI_DISK14_MAJOR:
    >               case XEN_SCSI_DISK15_MAJOR:
    > -                     *offset = (*minor / PARTS_PER_DISK) +
    > +                     *offset = (*minor / PARTS_PER_DISK) +

    Unrelated changes, please split to a pre-patch.

I must admit, this may have occurred due to some issues with my local vim settings. I will fix this.
    >                               ((major - XEN_SCSI_DISK8_MAJOR + 8) * 16) +
    >                               EMULATED_SD_DISK_NAME_OFFSET;
    >                       *minor = *minor +
    > @@ -1353,6 +1359,8 @@ static void blkif_free(struct blkfront_info *info, int suspend)
    >       unsigned int i;
    >       struct blkfront_ring_info *rinfo;
    > 
    > +     if (info->connected == BLKIF_STATE_FREEZING)
    > +             goto free_rings;
    >       /* Prevent new requests being issued until we fix things up. */
    >       info->connected = suspend ?
    >               BLKIF_STATE_SUSPENDED : BLKIF_STATE_DISCONNECTED;
    > @@ -1360,6 +1368,7 @@ static void blkif_free(struct blkfront_info *info, int suspend)
    >       if (info->rq)
    >               blk_mq_stop_hw_queues(info->rq);
    > 
    > +free_rings:
    >       for_each_rinfo(info, rinfo, i)
    >               blkif_free_ring(rinfo);
    > 
    > @@ -1563,8 +1572,10 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
    >       struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
    >       struct blkfront_info *info = rinfo->dev_info;
    > 
    > -     if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
    > -             return IRQ_HANDLED;
    > +     if (unlikely(info->connected != BLKIF_STATE_CONNECTED
    > +                 && info->connected != BLKIF_STATE_FREEZING)){

    Extra tab and missing space between '){'. Also my preference would be
    for the && to go at the end of the previous line, like it's done
    elsewhere in the file.
Ok.
    > +         return IRQ_HANDLED;
    > +     }
    > 
    >       spin_lock_irqsave(&rinfo->ring_lock, flags);
    >   again:
    > @@ -2027,6 +2038,7 @@ static int blkif_recover(struct blkfront_info *info)
    >       unsigned int segs;
    >       struct blkfront_ring_info *rinfo;
    > 
    > +     bool frozen = info->connected == BLKIF_STATE_FROZEN;

    Please put this together with the rest of the variable definitions,
    and leave the empty line as a split between variable definitions and
    code. I've already requested this on RFC v3 but you seem to have
    dropped some of the requests I've made there.

I am sorry if I missed this. I think I fixed everything you commented but may be this got left out. Will fix.
I will cross-check RFCV3 to see if I missed anything else.

    >       blkfront_gather_backend_features(info);
    >       /* Reset limits changed by blk_mq_update_nr_hw_queues(). */
    >       blkif_set_queue_limits(info);
    > @@ -2048,6 +2060,9 @@ static int blkif_recover(struct blkfront_info *info)
    >               kick_pending_request_queues(rinfo);
    >       }
    > 
    > +     if (frozen)
    > +             return 0;
    > +
    >       list_for_each_entry_safe(req, n, &info->requests, queuelist) {
    >               /* Requeue pending requests (flush or discard) */
    >               list_del_init(&req->queuelist);
    > @@ -2364,6 +2379,7 @@ static void blkfront_connect(struct blkfront_info *info)
    > 
    >               return;
    >       case BLKIF_STATE_SUSPENDED:
    > +     case BLKIF_STATE_FROZEN:
    >               /*
    >                * If we are recovering from suspension, we need to wait
    >                * for the backend to announce it's features before
    > @@ -2481,12 +2497,36 @@ static void blkback_changed(struct xenbus_device *dev,
    >               break;
    > 
    >       case XenbusStateClosed:
    > -             if (dev->state == XenbusStateClosed)
    > +             if (dev->state == XenbusStateClosed) {
    > +                     if (info->connected == BLKIF_STATE_FREEZING) {
    > +                             blkif_free(info, 0);
    > +                             info->connected = BLKIF_STATE_FROZEN;
    > +                             complete(&info->wait_backend_disconnected);
    > +                             break;

    There's no need for the break here, you can rely on the break below.
Ack.
    > +                     }
    > +
    >                       break;
    > +             }
    > +
    > +             /*
    > +              * We may somehow receive backend's Closed again while thawing
    > +              * or restoring and it causes thawing or restoring to fail.
    > +              * Ignore such unexpected state regardless of the backend state.
    > +              */
    > +             if (info->connected == BLKIF_STATE_FROZEN) {

    I think you can join this with the previous dev->state == XenbusStateClosed?

    Also, won't the device be in the Closed state already if it's in state
    frozen?
Yes but I think this mostly due to a hypothetical case if during thawing backend switches to Closed state.
I am not entirely sure if that could happen. Could use some expertise here.

    > +                     dev_dbg(&dev->dev,
    > +                                     "ignore the backend's Closed state: %s",
    > +                                     dev->nodename);
    > +                     break;
    > +             }
    >               /* fall through */
    >       case XenbusStateClosing:
    > -             if (info)
    > -                     blkfront_closing(info);
    > +             if (info) {
    > +                     if (info->connected == BLKIF_STATE_FREEZING)
    > +                             xenbus_frontend_closed(dev);
    > +                     else
    > +                             blkfront_closing(info);
    > +             }
    >               break;
    >       }
    >  }
    > @@ -2630,6 +2670,71 @@ static void blkif_release(struct gendisk *disk, fmode_t mode)
    >       mutex_unlock(&blkfront_mutex);
    >  }
    > 
    > +static int blkfront_freeze(struct xenbus_device *dev)
    > +{
    > +     unsigned int i;
    > +     struct blkfront_info *info = dev_get_drvdata(&dev->dev);
    > +     struct blkfront_ring_info *rinfo;
    > +     /* This would be reasonable timeout as used in xenbus_dev_shutdown() */
    > +     unsigned int timeout = 5 * HZ;
    > +     unsigned long flags;
    > +     int err = 0;
    > +
    > +     info->connected = BLKIF_STATE_FREEZING;
    > +
    > +     blk_mq_freeze_queue(info->rq);
    > +     blk_mq_quiesce_queue(info->rq);
    > +
    > +     for_each_rinfo(info, rinfo, i) {
    > +         /* No more gnttab callback work. */
    > +         gnttab_cancel_free_callback(&rinfo->callback);
    > +         /* Flush gnttab callback work. Must be done with no locks held. */
    > +         flush_work(&rinfo->work);
    > +     }
    > +
    > +     for_each_rinfo(info, rinfo, i) {
    > +         spin_lock_irqsave(&rinfo->ring_lock, flags);
    > +         if (RING_FULL(&rinfo->ring)
    > +                 || RING_HAS_UNCONSUMED_RESPONSES(&rinfo->ring)) {

    '||' should go at the end of the previous line.
Ack.
    > +             xenbus_dev_error(dev, err, "Hibernation Failed.
    > +                     The ring is still busy");
    > +             info->connected = BLKIF_STATE_CONNECTED;
    > +             spin_unlock_irqrestore(&rinfo->ring_lock, flags);

    You need to unfreeze the queues here, or else the device will be in a
    blocked state AFAICT.
Yes, I was under wrong assumption that if freeze fails everything should thaw back correctly apparently not.
I will fix this.
    > +             return -EBUSY;
    > +     }
    > +         spin_unlock_irqrestore(&rinfo->ring_lock, flags);
    > +     }

    This block has indentation all messed up.
Too many of these ( 
    > +     /* Kick the backend to disconnect */
    > +     xenbus_switch_state(dev, XenbusStateClosing);
    > +
    > +     /*
    > +      * We don't want to move forward before the frontend is diconnected
    > +      * from the backend cleanly.
    > +      */
    > +     timeout = wait_for_completion_timeout(&info->wait_backend_disconnected,
    > +                                           timeout);
    > +     if (!timeout) {
    > +             err = -EBUSY;

    Note err is only used here, and I think could just be dropped.

This err is what's being returned from the function. Am I missing anything?

    > +             xenbus_dev_error(dev, err, "Freezing timed out;"
    > +                              "the device may become inconsistent state");

    Leaving the device in this state is quite bad, as it's in a closed
    state and with the queues frozen. You should make an attempt to
    restore things to a working state.

You mean if backend closed after timeout? Is there a way to know that? I understand it's not good to 
leave it in this state however, I am still trying to find if there is a good way to know if backend is still connected after timeout.
Hence the message " the device may become inconsistent state".  I didn't see a timeout not even once on my end so that's why 
I may be looking for an alternate perspective here. may be need to thaw everything back intentionally is one thing I could think of.

    > +     }
    > +
    > +     return err;
    > +}
    > +
    > +static int blkfront_restore(struct xenbus_device *dev)
    > +{
    > +     struct blkfront_info *info = dev_get_drvdata(&dev->dev);
    > +     int err = 0;
    > +
    > +     err = talk_to_blkback(dev, info);
    > +     blk_mq_unquiesce_queue(info->rq);
    > +     blk_mq_unfreeze_queue(info->rq);
    > +     if (!err)
    > +         blk_mq_update_nr_hw_queues(&info->tag_set, info->nr_rings);

    Bad indentation. Also shouldn't you first update the queues and then
    unfreeze them?
Please correct me if I am wrong, blk_mq_update_nr_hw_queues freezes the queue
So I don't think the order could be reversed.

    Thanks, Roger.

Thanks,
Anchal

^ permalink raw reply	[flat|nested] 14+ messages in thread