Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
To: linux-pm@vger.kernel.org, linux-acpi@vger.kernel.org,
	netdev@vger.kernel.org, linux-wireless@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-renesas-soc@vger.kernel.org,
	linux-rockchip@lists.infradead.org
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
	"Len Brown" <lenb@kernel.org>,
	"Vishal Kulkarni" <vishal@chelsio.com>,
	"David S . Miller" <davem@davemloft.net>,
	"Jiri Pirko" <jiri@mellanox.com>,
	"Ido Schimmel" <idosch@mellanox.com>,
	"Johannes Berg" <johannes.berg@intel.com>,
	"Emmanuel Grumbach" <emmanuel.grumbach@intel.com>,
	"Luca Coelho" <luciano.coelho@intel.com>,
	"Intel Linux Wireless" <linuxwifi@intel.com>,
	"Kalle Valo" <kvalo@codeaurora.org>,
	"Peter Kaestle" <peter@piie.net>,
	"Darren Hart" <dvhart@infradead.org>,
	"Andy Shevchenko" <andy@infradead.org>,
	"Sebastian Reichel" <sre@kernel.org>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Daniel Lezcano" <daniel.lezcano@linaro.org>,
	"Amit Kucheria" <amit.kucheria@verdurent.com>,
	"Support Opensource" <support.opensource@diasemi.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Orson Zhai" <orsonzhai@gmail.com>,
	"Baolin Wang" <baolin.wang7@gmail.com>,
	"Chunyan Zhang" <zhang.lyra@gmail.com>,
	"Zhang Rui" <rui.zhang@intel.com>,
	"Allison Randal" <allison@lohutok.net>,
	"Enrico Weigelt" <info@metux.net>,
	"Gayatri Kammela" <gayatri.kammela@intel.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Bartlomiej Zolnierkiewicz" <b.zolnierkie@samsung.com>,
	"Andrzej Pietrasiewicz" <andrzej.p@collabora.com>,
	kernel@collabora.com
Subject: [PATCH v7 11/11] thermal: Rename set_mode() to change_mode()
Date: Mon, 29 Jun 2020 14:29:25 +0200
Message-ID: <20200629122925.21729-12-andrzej.p@collabora.com> (raw)
In-Reply-To: <20200629122925.21729-1-andrzej.p@collabora.com>

set_mode() is only called when tzd's mode is about to change. Actual
setting is performed in thermal_core, in thermal_zone_device_set_mode().
The meaning of set_mode() callback is actually to notify the driver about
the mode being changed and giving the driver a chance to oppose such
change.

To better reflect the purpose of the method rename it to change_mode()

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/platform/x86/acerhdf.c                          | 6 +++---
 drivers/thermal/imx_thermal.c                           | 8 ++++----
 drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 6 +++---
 drivers/thermal/intel/intel_quark_dts_thermal.c         | 6 +++---
 drivers/thermal/thermal_core.c                          | 4 ++--
 include/linux/thermal.h                                 | 2 +-
 6 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 76323855c80c..f816a8a13039 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -413,8 +413,8 @@ static inline void acerhdf_enable_kernelmode(void)
  *          the temperature and the fan.
  * disabled: the BIOS takes control of the fan.
  */
-static int acerhdf_set_mode(struct thermal_zone_device *thermal,
-			    enum thermal_device_mode mode)
+static int acerhdf_change_mode(struct thermal_zone_device *thermal,
+			       enum thermal_device_mode mode)
 {
 	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
 		acerhdf_revert_to_bios_mode();
@@ -473,7 +473,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
 	.bind = acerhdf_bind,
 	.unbind = acerhdf_unbind,
 	.get_temp = acerhdf_get_ec_temp,
-	.set_mode = acerhdf_set_mode,
+	.change_mode = acerhdf_change_mode,
 	.get_trip_type = acerhdf_get_trip_type,
 	.get_trip_hyst = acerhdf_get_trip_hyst,
 	.get_trip_temp = acerhdf_get_trip_temp,
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index a02398118d88..9700ae39feb7 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -330,8 +330,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	return 0;
 }
 
-static int imx_set_mode(struct thermal_zone_device *tz,
-			enum thermal_device_mode mode)
+static int imx_change_mode(struct thermal_zone_device *tz,
+			   enum thermal_device_mode mode)
 {
 	struct imx_thermal_data *data = tz->devdata;
 	struct regmap *map = data->tempmon;
@@ -447,7 +447,7 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.bind = imx_bind,
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
-	.set_mode = imx_set_mode,
+	.change_mode = imx_change_mode,
 	.get_trip_type = imx_get_trip_type,
 	.get_trip_temp = imx_get_trip_temp,
 	.get_crit_temp = imx_get_crit_temp,
@@ -860,7 +860,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
 	 * Need to disable thermal sensor, otherwise, when thermal core
 	 * try to get temperature before thermal sensor resume, a wrong
 	 * temperature will be read as the thermal sensor is powered
-	 * down. This is done in set_mode() operation called from
+	 * down. This is done in change_mode() operation called from
 	 * thermal_zone_device_disable()
 	 */
 	ret = thermal_zone_device_disable(data->tz);
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index ce49d3b100d5..d3732f624913 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -377,8 +377,8 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode mode)
+static int int3400_thermal_change_mode(struct thermal_zone_device *thermal,
+				       enum thermal_device_mode mode)
 {
 	struct int3400_thermal_priv *priv = thermal->devdata;
 	int result = 0;
@@ -399,7 +399,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
 
 static struct thermal_zone_device_ops int3400_thermal_ops = {
 	.get_temp = int3400_thermal_get_temp,
-	.set_mode = int3400_thermal_set_mode,
+	.change_mode = int3400_thermal_change_mode,
 };
 
 static struct thermal_zone_params int3400_thermal_params = {
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
index e29c3e330b17..3eafc6b0e6c3 100644
--- a/drivers/thermal/intel/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
@@ -298,8 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	return 0;
 }
 
-static int sys_set_mode(struct thermal_zone_device *tzd,
-				enum thermal_device_mode mode)
+static int sys_change_mode(struct thermal_zone_device *tzd,
+			   enum thermal_device_mode mode)
 {
 	int ret;
 
@@ -319,7 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = {
 	.get_trip_type = sys_get_trip_type,
 	.set_trip_temp = sys_set_trip_temp,
 	.get_crit_temp = sys_get_crit_temp,
-	.set_mode = sys_set_mode,
+	.change_mode = sys_change_mode,
 };
 
 static void free_soc_dts(struct soc_sensor_entry *aux_entry)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index e613f5c07bad..a61e91513584 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -482,8 +482,8 @@ static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
 		return ret;
 	}
 
-	if (tz->ops->set_mode)
-		ret = tz->ops->set_mode(tz, mode);
+	if (tz->ops->change_mode)
+		ret = tz->ops->change_mode(tz, mode);
 
 	if (!ret)
 		tz->mode = mode;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index df013c39ba9b..b9efaa780d88 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -76,7 +76,7 @@ struct thermal_zone_device_ops {
 		       struct thermal_cooling_device *);
 	int (*get_temp) (struct thermal_zone_device *, int *);
 	int (*set_trips) (struct thermal_zone_device *, int, int);
-	int (*set_mode) (struct thermal_zone_device *,
+	int (*change_mode) (struct thermal_zone_device *,
 		enum thermal_device_mode);
 	int (*get_trip_type) (struct thermal_zone_device *, int,
 		enum thermal_trip_type *);
-- 
2.17.1


  parent reply index

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-29 12:29 [PATCH v7 00/11] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-29 12:29 ` [PATCH v7 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-29 12:45   ` Amit Kucheria
2020-06-29 14:14   ` Bartlomiej Zolnierkiewicz
2020-06-29 12:29 ` [PATCH v7 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-29 14:15   ` Bartlomiej Zolnierkiewicz
2020-06-30  5:07   ` Amit Kucheria
2020-06-29 12:29 ` [PATCH v7 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-29 12:46   ` Amit Kucheria
2020-06-29 12:29 ` [PATCH v7 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-29 12:47   ` Amit Kucheria
2020-06-29 12:29 ` Andrzej Pietrasiewicz [this message]
2020-06-29 12:48   ` [PATCH v7 11/11] thermal: Rename set_mode() to change_mode() Amit Kucheria
2020-06-30 12:57 ` [PATCH v7 00/11] Stop monitoring disabled devices Daniel Lezcano
2020-06-30 13:43   ` Andrzej Pietrasiewicz
2020-06-30 14:53     ` Daniel Lezcano
2020-06-30 15:29       ` Andrzej Pietrasiewicz
2020-06-30 15:53         ` Daniel Lezcano
2020-06-30 16:56           ` Andrzej Pietrasiewicz
2020-06-30 18:33             ` Daniel Lezcano
2020-07-01 10:23               ` Andrzej Pietrasiewicz
2020-07-01 14:25                 ` Daniel Lezcano
2020-07-02 13:47                 ` Daniel Lezcano
2020-07-02 13:53                   ` Andrzej Pietrasiewicz
2020-07-02 14:58                     ` Daniel Lezcano
2020-07-02 17:01                     ` Daniel Lezcano
2020-07-02 17:19                       ` Andrzej Pietrasiewicz
2020-07-02 17:49                         ` Daniel Lezcano
2020-07-02 17:52                           ` Daniel Lezcano
2020-07-03  1:49                           ` Zhang Rui
2020-07-03  6:38                             ` Daniel Lezcano
2020-07-03 10:45                               ` Andrzej Pietrasiewicz
2020-07-03 11:05                                 ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200629122925.21729-12-andrzej.p@collabora.com \
    --to=andrzej.p@collabora.com \
    --cc=allison@lohutok.net \
    --cc=amit.kucheria@verdurent.com \
    --cc=andy@infradead.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=baolin.wang7@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=davem@davemloft.net \
    --cc=dvhart@infradead.org \
    --cc=emmanuel.grumbach@intel.com \
    --cc=festevam@gmail.com \
    --cc=gayatri.kammela@intel.com \
    --cc=heiko@sntech.de \
    --cc=idosch@mellanox.com \
    --cc=info@metux.net \
    --cc=jiri@mellanox.com \
    --cc=johannes.berg@intel.com \
    --cc=kernel@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=kvalo@codeaurora.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linuxwifi@intel.com \
    --cc=luciano.coelho@intel.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=orsonzhai@gmail.com \
    --cc=peter@piie.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=sre@kernel.org \
    --cc=support.opensource@diasemi.com \
    --cc=tglx@linutronix.de \
    --cc=vishal@chelsio.com \
    --cc=zhang.lyra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git