From: Shawn Guo <shawn.guo@linaro.org>
To: Amit Kucheria <amit.kucheria@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Konrad Dybcio <konradybcio@gmail.com>,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH 2/2] thermal: qcom: tsens-v0_1: Add support for MSM8939
Date: Mon, 29 Jun 2020 22:49:26 +0800 [thread overview]
Message-ID: <20200629144926.665-3-shawn.guo@linaro.org> (raw)
In-Reply-To: <20200629144926.665-1-shawn.guo@linaro.org>
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors.
Different from its predecessor MSM8916, where 'calib_sel' bits sit in
separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and
spread on discrete offsets. That's why all qfprom bits are read as one
go and later mapped to calibration data for MSM8939.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
drivers/thermal/qcom/tsens-v0_1.c | 144 +++++++++++++++++++++++++++++-
drivers/thermal/qcom/tsens.c | 3 +
drivers/thermal/qcom/tsens.h | 2 +-
3 files changed, 147 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 959a9371d205..e64db5f80d90 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -48,6 +48,63 @@
#define MSM8916_CAL_SEL_MASK 0xe0000000
#define MSM8916_CAL_SEL_SHIFT 29
+/* eeprom layout data for 8939 */
+#define MSM8939_BASE0_MASK 0x000000ff
+#define MSM8939_BASE1_MASK 0xff000000
+#define MSM8939_BASE0_SHIFT 0
+#define MSM8939_BASE1_SHIFT 24
+
+#define MSM8939_S0_P1_MASK 0x000001f8
+#define MSM8939_S1_P1_MASK 0x001f8000
+#define MSM8939_S2_P1_MASK_0_4 0xf8000000
+#define MSM8939_S2_P1_MASK_5 0x00000001
+#define MSM8939_S3_P1_MASK 0x00001f80
+#define MSM8939_S4_P1_MASK 0x01f80000
+#define MSM8939_S5_P1_MASK 0x00003f00
+#define MSM8939_S6_P1_MASK 0x03f00000
+#define MSM8939_S7_P1_MASK 0x0000003f
+#define MSM8939_S8_P1_MASK 0x0003f000
+#define MSM8939_S9_P1_MASK 0x07e00000
+
+#define MSM8939_S0_P2_MASK 0x00007e00
+#define MSM8939_S1_P2_MASK 0x07e00000
+#define MSM8939_S2_P2_MASK 0x0000007e
+#define MSM8939_S3_P2_MASK 0x0007e000
+#define MSM8939_S4_P2_MASK 0x7e000000
+#define MSM8939_S5_P2_MASK 0x000fc000
+#define MSM8939_S6_P2_MASK 0xfc000000
+#define MSM8939_S7_P2_MASK 0x00000fc0
+#define MSM8939_S8_P2_MASK 0x00fc0000
+#define MSM8939_S9_P2_MASK_0_4 0xf8000000
+#define MSM8939_S9_P2_MASK_5 0x00002000
+
+#define MSM8939_S0_P1_SHIFT 3
+#define MSM8939_S1_P1_SHIFT 15
+#define MSM8939_S2_P1_SHIFT_0_4 27
+#define MSM8939_S2_P1_SHIFT_5 0
+#define MSM8939_S3_P1_SHIFT 7
+#define MSM8939_S4_P1_SHIFT 19
+#define MSM8939_S5_P1_SHIFT 8
+#define MSM8939_S6_P1_SHIFT 20
+#define MSM8939_S7_P1_SHIFT 0
+#define MSM8939_S8_P1_SHIFT 12
+#define MSM8939_S9_P1_SHIFT 21
+
+#define MSM8939_S0_P2_SHIFT 9
+#define MSM8939_S1_P2_SHIFT 21
+#define MSM8939_S2_P2_SHIFT 1
+#define MSM8939_S3_P2_SHIFT 13
+#define MSM8939_S4_P2_SHIFT 25
+#define MSM8939_S5_P2_SHIFT 14
+#define MSM8939_S6_P2_SHIFT 26
+#define MSM8939_S7_P2_SHIFT 6
+#define MSM8939_S8_P2_SHIFT 18
+#define MSM8939_S9_P2_SHIFT_0_4 27
+#define MSM8939_S9_P2_SHIFT_5 13
+
+#define MSM8939_CAL_SEL_MASK 0x7
+#define MSM8939_CAL_SEL_SHIFT 0
+
/* eeprom layout data for 8974 */
#define BASE1_MASK 0xff
#define S0_P1_MASK 0x3f00
@@ -189,6 +246,76 @@ static int calibrate_8916(struct tsens_priv *priv)
return 0;
}
+static int calibrate_8939(struct tsens_priv *priv)
+{
+ int base0 = 0, base1 = 0, i;
+ u32 p1[10], p2[10];
+ int mode = 0;
+ u32 *qfprom_cdata;
+ u32 cdata[6];
+
+ qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ /* Mapping between qfprom nvmem and calibration data */
+ cdata[0] = qfprom_cdata[12];
+ cdata[1] = qfprom_cdata[13];
+ cdata[2] = qfprom_cdata[0];
+ cdata[3] = qfprom_cdata[1];
+ cdata[4] = qfprom_cdata[22];
+ cdata[5] = qfprom_cdata[21];
+
+ mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
+ dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
+ p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
+ p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
+ p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
+ p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
+ p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
+ p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
+ p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
+ p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
+ p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
+ p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
+ p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
+ for (i = 0; i < priv->num_sensors; i++)
+ p2[i] = (base1 + p2[i]) << 2;
+ fallthrough;
+ case ONE_PT_CALIB2:
+ base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT;
+ p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
+ p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
+ p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
+ p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5;
+ p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
+ p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
+ p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
+ p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
+ p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
+ p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
+ p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
+ for (i = 0; i < priv->num_sensors; i++)
+ p1[i] = ((base0) + p1[i]) << 2;
+ break;
+ default:
+ for (i = 0; i < priv->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(priv, p1, p2, mode);
+ kfree(qfprom_cdata);
+
+ return 0;
+}
+
static int calibrate_8974(struct tsens_priv *priv)
{
int base1 = 0, base2 = 0, i;
@@ -325,7 +452,7 @@ static int calibrate_8974(struct tsens_priv *priv)
return 0;
}
-/* v0.1: 8916, 8974 */
+/* v0.1: 8916, 8939, 8974 */
static struct tsens_features tsens_v0_1_feat = {
.ver_major = VER_0_1,
@@ -386,6 +513,21 @@ struct tsens_plat_data data_8916 = {
.fields = tsens_v0_1_regfields,
};
+static const struct tsens_ops ops_8939 = {
+ .init = init_common,
+ .calibrate = calibrate_8939,
+ .get_temp = get_temp_common,
+};
+
+struct tsens_plat_data data_8939 = {
+ .num_sensors = 10,
+ .ops = &ops_8939,
+ .hw_ids = (unsigned int []){ 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 },
+
+ .feat = &tsens_v0_1_feat,
+ .fields = tsens_v0_1_regfields,
+};
+
static const struct tsens_ops ops_8974 = {
.init = init_common,
.calibrate = calibrate_8974,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 8d3e94d2a9ed..52656a24f813 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -897,6 +897,9 @@ static const struct of_device_id tsens_table[] = {
{
.compatible = "qcom,msm8916-tsens",
.data = &data_8916,
+ }, {
+ .compatible = "qcom,msm8939-tsens",
+ .data = &data_8939,
}, {
.compatible = "qcom,msm8974-tsens",
.data = &data_8974,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 59d01162c66a..f40b625f897e 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -585,7 +585,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
extern struct tsens_plat_data data_8960;
/* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8974;
+extern struct tsens_plat_data data_8916, data_8939, data_8974;
/* TSENS v1 targets */
extern struct tsens_plat_data data_tsens_v1, data_8976;
--
2.17.1
next prev parent reply other threads:[~2020-06-29 19:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-29 14:49 [PATCH 0/2] Add msm8939 tsens support Shawn Guo
2020-06-29 14:49 ` [PATCH 1/2] dt-bindings: tsens: qcom: Document MSM8939 compatible Shawn Guo
2020-06-29 14:49 ` Shawn Guo [this message]
2020-07-27 6:26 ` [PATCH 2/2] thermal: qcom: tsens-v0_1: Add support for MSM8939 Amit Kucheria
2020-07-27 6:36 ` Amit Kucheria
2020-07-27 8:33 ` Shawn Guo
2020-07-27 9:15 ` Amit Kucheria
2020-07-21 13:29 ` [PATCH 0/2] Add msm8939 tsens support Daniel Lezcano
2020-07-25 12:25 ` Konrad Dybcio
2020-07-27 8:34 ` Daniel Lezcano
2020-07-27 8:44 ` Daniel Lezcano
2020-07-27 8:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629144926.665-3-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=konradybcio@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).