linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/11] Allwinner A100 Initial support
@ 2020-06-22  2:58 Frank Lee
  2020-06-22  2:58 ` [PATCH v2 01/11] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU Frank Lee
                   ` (10 more replies)
  0 siblings, 11 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:58 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, frank

From: frank <frank@allwinnertech.com>

This patch set adds initial support for allwinner a100 soc,
which is a 64-bit tablet chip.

v2:
-Some naming consistency
-Repair email address
-Fix mmc clock
-Don't export system clock
-Fix checkpatch warning
-Drop unneeded pin function, convert to jtag_gpu and i2s_x

Frank Lee (11):
  dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and
    R-CCU
  clk: sunxi-ng: add support for the Allwinner A100 CCU
  dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings
  pinctrl: sunxi: add support for the Allwinner A100 pin controller
  dt-bindings: nvmem: SID: add binding for A100's SID controller
  nvmem: sunxi-sid: add support for A100's SID controller
  dt-bindings: thermal: sun8i: Add binding for A100's THS controller
  thermal: sun8i: Add A100's THS controller support
  arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
  dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
  arm64: allwinner: A100: add support for Allwinner Perf1 board

 Documentation/devicetree/bindings/arm/sunxi.yaml   |    5 +
 .../bindings/clock/allwinner,sun4i-a10-ccu.yaml    |    7 +-
 .../bindings/nvmem/allwinner,sun4i-a10-sid.yaml    |    1 +
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml       |   72 +-
 .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml |    6 +-
 arch/arm64/boot/dts/allwinner/Makefile             |    1 +
 .../dts/allwinner/sun50i-a100-allwinner-perf1.dts  |   27 +
 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi     |  337 ++++++
 drivers/clk/sunxi-ng/Kconfig                       |   10 +
 drivers/clk/sunxi-ng/Makefile                      |    2 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c           |  214 ++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h           |   21 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100.c             | 1261 ++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100.h             |   56 +
 drivers/nvmem/sunxi_sid.c                          |    6 +
 drivers/pinctrl/sunxi/Kconfig                      |   10 +
 drivers/pinctrl/sunxi/Makefile                     |    2 +
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c      |  105 ++
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c        |  708 +++++++++++
 drivers/thermal/sun8i_thermal.c                    |   14 +
 include/dt-bindings/clock/sun50i-a100-ccu.h        |  116 ++
 include/dt-bindings/clock/sun50i-a100-r-ccu.h      |   23 +
 include/dt-bindings/reset/sun50i-a100-ccu.h        |   68 ++
 include/dt-bindings/reset/sun50i-a100-r-ccu.h      |   18 +
 24 files changed, 3059 insertions(+), 31 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
 create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h

-- 
1.9.1


^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH v2 01/11] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
@ 2020-06-22  2:58 ` Frank Lee
  2020-06-22  2:58 ` [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU Frank Lee
                   ` (9 subsequent siblings)
  10 siblings, 0 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:58 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

This patch adds binding to a100's ccu clock and r-ccu clock.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml         | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index 4d38212..3b45344 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -36,6 +36,8 @@ properties:
       - allwinner,sun9i-a80-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
+      - allwinner,sun50i-a100-ccu
+      - allwinner,sun50i-a100-r-ccu
       - allwinner,sun50i-h5-ccu
       - allwinner,sun50i-h6-ccu
       - allwinner,sun50i-h6-r-ccu
@@ -78,6 +80,7 @@ if:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
         - allwinner,sun50i-a64-r-ccu
+        - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
 
 then:
@@ -94,7 +97,9 @@ else:
   if:
     properties:
       compatible:
-        const: allwinner,sun50i-h6-ccu
+        enum:
+          - allwinner,sun50i-a100-ccu
+          - allwinner,sun50i-h6-ccu
 
   then:
     properties:
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
  2020-06-22  2:58 ` [PATCH v2 01/11] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU Frank Lee
@ 2020-06-22  2:58 ` Frank Lee
  2020-06-29 14:58   ` Maxime Ripard
  2020-06-22  2:58 ` [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings Frank Lee
                   ` (8 subsequent siblings)
  10 siblings, 1 reply; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:58 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Add support for a100 in the sunxi-ng CCU framework.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 drivers/clk/sunxi-ng/Kconfig                  |   10 +
 drivers/clk/sunxi-ng/Makefile                 |    2 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c      |  214 +++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h      |   21 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100.c        | 1261 +++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100.h        |   56 ++
 include/dt-bindings/clock/sun50i-a100-ccu.h   |  116 +++
 include/dt-bindings/clock/sun50i-a100-r-ccu.h |   23 +
 include/dt-bindings/reset/sun50i-a100-ccu.h   |   68 ++
 include/dt-bindings/reset/sun50i-a100-r-ccu.h |   18 +
 10 files changed, 1789 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h
 create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index cdf3330..ce5f584 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -17,6 +17,16 @@ config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN50I_A100_CCU
+	bool "Support for the Allwinner A100 CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
+config SUN50I_A100_R_CCU
+	bool "Support for the Allwinner A100 PRCM CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
 config SUN50I_H6_CCU
 	bool "Support for the Allwinner H6 CCU"
 	default ARM64 && ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4c7bee8..3eb5cff 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,6 +23,8 @@ obj-y				+= ccu_mp.o
 # SoC support
 obj-$(CONFIG_SUNIV_F1C100S_CCU)	+= ccu-suniv-f1c100s.o
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
+obj-$(CONFIG_SUN50I_A100_CCU)	+= ccu-sun50i-a100.o
+obj-$(CONFIG_SUN50I_A100_R_CCU)	+= ccu-sun50i-a100-r.o
 obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
 obj-$(CONFIG_SUN50I_H6_R_CCU)	+= ccu-sun50i-h6-r.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
new file mode 100644
index 0000000..d6dbd355
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-a100-r.h"
+
+static const char * const cpus_r_apb2_parents[] = { "dcxo24M", "osc32k",
+						     "iosc", "pll-periph0" };
+static const struct ccu_mux_var_prediv cpus_r_apb2_predivs[] = {
+	{ .index = 3, .shift = 0, .width = 5 },
+};
+
+static struct ccu_div r_cpus_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= cpus_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(cpus_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x000,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("cpus",
+						      cpus_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &r_cpus_clk.common.hw, 1, 1, 0);
+
+static struct ccu_div r_apb1_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+
+	.common		= {
+		.reg		= 0x00c,
+		.hw.init	= CLK_HW_INIT("r-apb1",
+					      "r-ahb",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_div r_apb2_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= cpus_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(cpus_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x010,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("r-apb2",
+						      cpus_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static const struct clk_parent_data clk_parent_r_apb1[] = {
+	{ .hw = &r_apb1_clk.common.hw },
+};
+
+static const struct clk_parent_data clk_parent_r_apb2[] = {
+	{ .hw = &r_apb2_clk.common.hw },
+};
+
+static SUNXI_CCU_GATE_DATA(r_apb1_timer_clk, "r-apb1-timer", clk_parent_r_apb1,
+			   0x11c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_twd_clk, "r-apb1-twd", clk_parent_r_apb1,
+			   0x12c, BIT(0), 0);
+
+static const char * const r_apb1_pwm_clk_parents[] = { "dcxo24M", "osc32k",
+						       "iosc" };
+static SUNXI_CCU_MUX(r_apb1_pwm_clk, "r-apb1-pwm", r_apb1_pwm_clk_parents,
+		     0x130, 24, 2, 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_bus_pwm_clk, "r-apb1-bus-pwm",
+			   clk_parent_r_apb1, 0x13c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_ppu_clk, "r-apb1-ppu", clk_parent_r_apb1,
+			   0x17c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb2_uart_clk, "r-apb2-uart", clk_parent_r_apb2,
+			   0x18c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb2_i2c0_clk, "r-apb2-i2c0", clk_parent_r_apb2,
+			   0x19c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb2_i2c1_clk, "r-apb2-i2c1", clk_parent_r_apb2,
+			   0x19c, BIT(1), 0);
+
+static const char * const r_apb1_ir_rx_parents[] = { "osc32k", "dcxo24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_apb1_ir_rx_clk, "r-apb1-ir-rx",
+				  r_apb1_ir_rx_parents, 0x1c0,
+				  0, 5,		/* M */
+				  8, 2,		/* P */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_bus_ir_rx_clk, "r-apb1-bus-ir-rx",
+			   clk_parent_r_apb1, 0x1cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(r_ahb_bus_rtc_clk, "r-ahb-rtc", "r-ahb",
+		      0x20c, BIT(0), 0);
+
+static struct ccu_common *sun50i_a100_r_ccu_clks[] = {
+	&r_cpus_clk.common,
+	&r_apb1_clk.common,
+	&r_apb2_clk.common,
+	&r_apb1_timer_clk.common,
+	&r_apb1_twd_clk.common,
+	&r_apb1_pwm_clk.common,
+	&r_apb1_bus_pwm_clk.common,
+	&r_apb1_ppu_clk.common,
+	&r_apb2_uart_clk.common,
+	&r_apb2_i2c0_clk.common,
+	&r_apb2_i2c1_clk.common,
+	&r_apb1_ir_rx_clk.common,
+	&r_apb1_bus_ir_rx_clk.common,
+	&r_ahb_bus_rtc_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_a100_r_hw_clks = {
+	.hws	= {
+		[CLK_R_CPUS]		= &r_cpus_clk.common.hw,
+		[CLK_R_AHB]		= &r_ahb_clk.hw,
+		[CLK_R_APB1]		= &r_apb1_clk.common.hw,
+		[CLK_R_APB2]		= &r_apb2_clk.common.hw,
+		[CLK_R_APB1_TIMER]	= &r_apb1_timer_clk.common.hw,
+		[CLK_R_APB1_TWD]	= &r_apb1_twd_clk.common.hw,
+		[CLK_R_APB1_PWM]	= &r_apb1_pwm_clk.common.hw,
+		[CLK_R_APB1_BUS_PWM]	= &r_apb1_bus_pwm_clk.common.hw,
+		[CLK_R_APB1_PPU]	= &r_apb1_ppu_clk.common.hw,
+		[CLK_R_APB2_UART]	= &r_apb2_uart_clk.common.hw,
+		[CLK_R_APB2_I2C0]	= &r_apb2_i2c0_clk.common.hw,
+		[CLK_R_APB2_I2C1]	= &r_apb2_i2c1_clk.common.hw,
+		[CLK_R_APB1_IR]		= &r_apb1_ir_rx_clk.common.hw,
+		[CLK_R_APB1_BUS_IR]	= &r_apb1_bus_ir_rx_clk.common.hw,
+		[CLK_R_AHB_BUS_RTC]	= &r_ahb_bus_rtc_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_a100_r_ccu_resets[] = {
+	[RST_R_APB1_TIMER]	=  { 0x11c, BIT(16) },
+	[RST_R_APB1_BUS_PWM]	=  { 0x13c, BIT(16) },
+	[RST_R_APB1_PPU]	=  { 0x17c, BIT(16) },
+	[RST_R_APB2_UART]	=  { 0x18c, BIT(16) },
+	[RST_R_APB2_I2C0]	=  { 0x19c, BIT(16) },
+	[RST_R_APB2_I2C1]	=  { 0x19c, BIT(17) },
+	[RST_R_APB1_BUS_IR]	=  { 0x1cc, BIT(16) },
+	[RST_R_AHB_BUS_RTC]	=  { 0x20c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_a100_r_ccu_desc = {
+	.ccu_clks	= sun50i_a100_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a100_r_ccu_clks),
+
+	.hw_clks	= &sun50i_a100_r_hw_clks,
+
+	.resets		= sun50i_a100_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a100_r_ccu_resets),
+};
+
+static int sun50i_a100_r_ccu_probe(struct platform_device *pdev)
+{
+	void __iomem *reg;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_r_ccu_desc);
+}
+
+static const struct of_device_id sun50i_a100_r_ccu_ids[] = {
+	{ .compatible = "allwinner,sun50i-a100-r-ccu" },
+	{ }
+};
+
+static struct platform_driver sun50i_a100_r_ccu_driver = {
+	.probe	= sun50i_a100_r_ccu_probe,
+	.driver	= {
+		.name	= "sun50i-a100-r-ccu",
+		.of_match_table	= sun50i_a100_r_ccu_ids,
+	},
+};
+module_platform_driver(sun50i_a100_r_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
new file mode 100644
index 0000000..a541259
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#ifndef _CCU_SUN50IW10_R_H
+#define _CCU_SUN50IW10_R_H
+
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+#define CLK_R_CPUS		0
+#define CLK_R_AHB		1
+
+/* exported except APB1 for R_PIO */
+
+#define CLK_R_APB2		3
+
+#define CLK_NUMBER	(CLK_R_AHB_BUS_RTC + 1)
+
+#endif /* _CCU_SUN50IW10_R_H */
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
new file mode 100644
index 0000000..57c6910
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
@@ -0,0 +1,1261 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-a100.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_A100_PLL_CPUX_REG		0x000
+static struct ccu_mult pll_cpux_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.mult		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "dcxo24M",
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_A100_PLL_DDR0_REG		0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x010,
+		.hw.init	= CLK_HW_INIT("pll-ddr0", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE |
+					      CLK_IS_CRITICAL),
+	},
+};
+
+#define SUN50I_A100_PLL_PERIPH0_REG	0x020
+static struct ccu_nkmp pll_periph0_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x020,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_PERIPH1_REG	0x028
+static struct ccu_nkmp pll_periph1_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph1", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG	0x128
+
+#define SUN50I_A100_PLL_GPU_REG		0x030
+static struct ccu_nkmp pll_gpu_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x030,
+		.hw.init	= CLK_HW_INIT("pll-gpu", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_A100_PLL_VIDEO0_REG	0x040
+static struct ccu_nm pll_video0_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x040,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video0", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VIDEO1_REG	0x048
+static struct ccu_nm pll_video1_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x048,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video1", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VIDEO2_REG	0x050
+static struct ccu_nm pll_video2_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x050,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video2", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VE_REG		0x058
+static struct ccu_nkmp pll_ve_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x058,
+		.hw.init	= CLK_HW_INIT("pll-ve", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The COM PLL has m0 dividers in addition to the usual N, M
+ * factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz,
+ * ignore it for now.
+ */
+#define SUN50I_A100_PLL_COM_REG		0x060
+static struct ccu_sdm_setting pll_com_sdm_table[] = {
+	{ .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 },
+};
+
+static struct ccu_nm pll_com_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(0, 1),
+	.sdm		= _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24),
+					 0x160, BIT(31)),
+	.common		= {
+		.reg		= 0x060,
+		.features	= CCU_FEATURE_SIGMA_DELTA_MOD,
+		.hw.init	= CLK_HW_INIT("pll-com", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VIDEO3_REG	0x068
+static struct ccu_nm pll_video3_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x068,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video3", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL has m0, m1 dividers in addition to the usual N, M
+ * factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz,
+ * 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now.
+ * Enforce the default for them, which is m0 = 1, m1 = 0.
+ */
+#define SUN50I_A100_PLL_AUDIO_REG		0x078
+static struct ccu_sdm_setting pll_audio_sdm_table[] = {
+	{ .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 },
+	{ .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 },
+	{ .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 },
+	{ .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
+};
+
+static struct ccu_nm pll_audio_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(16, 6),
+	.fixed_post_div	= 2,
+	.sdm		= _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
+					 0x178, BIT(31)),
+	.common		= {
+		.reg		= 0x078,
+		.features	= CCU_FEATURE_FIXED_POSTDIV |
+				  CCU_FEATURE_SIGMA_DELTA_MOD,
+		.hw.init	= CLK_HW_INIT("pll-audio", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const cpux_parents[] = { "dcxo24M", "osc32k",
+					     "iosc", "pll-cpux",
+					      "pll-periph0" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k",
+						      "iosc", "pll-periph0",
+						      "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+			     psi_ahb1_ahb2_parents,
+			     0x510,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k",
+						       "psi-ahb1-ahb2",
+						       "pll-periph0",
+						       "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0",
+					     "pll-periph0",
+					     "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+				 0, 3,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600,
+				 0, 4,		/* M */
+				 24, 1,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+		      0x60c, BIT(0), 0);
+
+static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x",
+					     "pll-video0-2x", "pll-video1-2x",
+					     "pll-video2-2x"};
+static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d",
+				 g2d_parents,
+				 0x630,
+				 0, 4,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
+		      0x63c, BIT(0), 0);
+
+static const char * const gpu_parents[] = { "pll-gpu" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
+				       0, 2,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+		      0x67c, BIT(0), 0);
+
+static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+		      0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+				 0, 3,		/* M */
+				 24, 1,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+		      0x69c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+		      0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
+		      0x71c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
+		      0x72c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+		      0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+		      0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+		      0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+		      0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+		      0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+		      0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+		      0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
+		      0x804, BIT(8), 0);
+static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus",
+		      0x804, BIT(9), 0);
+static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
+		      0x804, BIT(10), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+		      0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "dcxo24M",
+						 "pll-periph0",
+						 "pll-periph1",
+						 "pll-periph0-2x",
+						 "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x",
+					    "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  CLK_SET_RATE_NO_REPARENT);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  CLK_SET_RATE_NO_REPARENT);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  CLK_SET_RATE_NO_REPARENT);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
+		      BIT(31) | BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
+
+static const char * const ir_parents[] = { "osc32k", "iosc",
+					   "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" };
+static struct ccu_div i2s0_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa10,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s0",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static struct ccu_div i2s1_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa14,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s1",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static struct ccu_div i2s2_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa18,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s2",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static struct ccu_div i2s3_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa1c,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s3",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0);
+
+static struct ccu_div spdif_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa24,
+		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa40,
+		.hw.init	= CLK_HW_INIT_PARENTS("dmic",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
+				 audio_parents, 0xa50,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
+				 audio_parents, 0xa54,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
+				 audio_parents, 0xa58,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
+		      BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_A100_USB0_CLK_REG		0xa70
+#define SUN50I_A100_USB1_CLK_REG		0xa74
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3",
+		      0xabc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3",
+		      0xacc, BIT(0), 0);
+
+static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x",
+						 "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi",
+				 mipi_dsi_parents,
+				 0xb24,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3",
+		      0xb4c, BIT(0), 0);
+
+static const char * const tcon_lcd_parents[] = { "pll-video0-4x",
+						  "pll-video1-4x",
+						  "pll-video2-4x",
+						  "pll-video3-4x",
+						  "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0",
+				  tcon_lcd_parents, 0xb60,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3",
+		      0xb7c, BIT(0), 0);
+
+static const char * const ledc_parents[] = { "dcxo24M",
+					     "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc",
+				  ledc_parents, 0xbf0,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0);
+
+static const char * const csi_top_parents[] = { "pll-periph0-2x",
+						"pll-video0-2x",
+						"pll-video1-2x",
+						"pll-video2-2x",
+						"pll-video3-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top",
+				 csi_top_parents, 0xc04,
+				 0, 4,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2",
+						  "pll-video3", "pll-video0",
+						  "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk",
+				 csi0_mclk_parents, 0xc08,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3",
+						  "pll-video0", "pll-video1",
+						  "pll-video2" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk",
+				 csi1_mclk_parents, 0xc0c,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0);
+
+static const char * const csi_isp_parents[] = { "pll-periph0-2x",
+						"pll-video0-2x",
+						"pll-video1-2x",
+						"pll-video2-2x",
+						"pll-video3-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
+				 csi_isp_parents, 0xc20,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
+
+static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio",
+			   &pll_com_clk.common.hw,
+			   5, 1, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
+			   &pll_periph0_clk.common.hw,
+			   1, 2, 0);
+
+static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
+			   &pll_periph1_clk.common.hw,
+			   1, 2, 0);
+
+static const struct clk_hw *pll_video0_parents[] = {
+	&pll_video0_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x",
+			    pll_video0_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x",
+			    pll_video0_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_video1_parents[] = {
+	&pll_video1_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x",
+			    pll_video1_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x",
+			    pll_video1_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_video2_parents[] = {
+	&pll_video2_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x",
+			    pll_video2_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x",
+			    pll_video2_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_video3_parents[] = {
+	&pll_video3_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x",
+			    pll_video3_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x",
+			    pll_video3_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_a100_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph1_clk.common,
+	&pll_gpu_clk.common,
+	&pll_video0_clk.common,
+	&pll_video1_clk.common,
+	&pll_video2_clk.common,
+	&pll_video3_clk.common,
+	&pll_ve_clk.common,
+	&pll_com_clk.common,
+	&pll_audio_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&cpux_apb_clk.common,
+	&psi_ahb1_ahb2_clk.common,
+	&ahb3_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&mbus_clk.common,
+	&de_clk.common,
+	&bus_de_clk.common,
+	&g2d_clk.common,
+	&bus_g2d_clk.common,
+	&gpu_clk.common,
+	&bus_gpu_clk.common,
+	&ce_clk.common,
+	&bus_ce_clk.common,
+	&ve_clk.common,
+	&bus_ve_clk.common,
+	&bus_dma_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_hstimer_clk.common,
+	&avs_clk.common,
+	&bus_dbg_clk.common,
+	&bus_psi_clk.common,
+	&bus_pwm_clk.common,
+	&bus_iommu_clk.common,
+	&mbus_dma_clk.common,
+	&mbus_ve_clk.common,
+	&mbus_ce_clk.common,
+	&mbus_nand_clk.common,
+	&mbus_csi_clk.common,
+	&mbus_isp_clk.common,
+	&mbus_g2d_clk.common,
+	&bus_dram_clk.common,
+	&nand0_clk.common,
+	&nand1_clk.common,
+	&bus_nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_spi2_clk.common,
+	&emac_25m_clk.common,
+	&bus_emac_clk.common,
+	&ir_rx_clk.common,
+	&bus_ir_rx_clk.common,
+	&ir_tx_clk.common,
+	&bus_ir_tx_clk.common,
+	&bus_gpadc_clk.common,
+	&bus_ths_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&i2s3_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2s3_clk.common,
+	&spdif_clk.common,
+	&bus_spdif_clk.common,
+	&dmic_clk.common,
+	&bus_dmic_clk.common,
+	&audio_codec_dac_clk.common,
+	&audio_codec_adc_clk.common,
+	&audio_codec_4x_clk.common,
+	&bus_audio_codec_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_phy1_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci1_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_otg_clk.common,
+	&bus_lradc_clk.common,
+	&bus_dpss_top0_clk.common,
+	&bus_dpss_top1_clk.common,
+	&mipi_dsi_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&tcon_lcd_clk.common,
+	&bus_tcon_lcd_clk.common,
+	&ledc_clk.common,
+	&bus_ledc_clk.common,
+	&csi_top_clk.common,
+	&csi0_mclk_clk.common,
+	&csi1_mclk_clk.common,
+	&bus_csi_clk.common,
+	&csi_isp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_a100_hw_clks = {
+	.hws	= {
+		[CLK_OSC12M]		= &osc12M_clk.hw,
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VIDEO0_4X]	= &pll_video0_4x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_VIDEO1_4X]	= &pll_video1_4x_clk.hw,
+		[CLK_PLL_VIDEO2]	= &pll_video2_clk.common.hw,
+		[CLK_PLL_VIDEO2_2X]	= &pll_video2_2x_clk.hw,
+		[CLK_PLL_VIDEO2_4X]	= &pll_video2_4x_clk.hw,
+		[CLK_PLL_VIDEO3]	= &pll_video3_clk.common.hw,
+		[CLK_PLL_VIDEO3_2X]	= &pll_video3_2x_clk.hw,
+		[CLK_PLL_VIDEO3_4X]	= &pll_video3_4x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_COM]		= &pll_com_clk.common.hw,
+		[CLK_PLL_COM_AUDIO]	= &pll_com_audio_clk.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.common.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_CPUX_APB]		= &cpux_apb_clk.common.hw,
+		[CLK_PSI_AHB1_AHB2]	= &psi_ahb1_ahb2_clk.common.hw,
+		[CLK_AHB3]		= &ahb3_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_G2D]		= &g2d_clk.common.hw,
+		[CLK_BUS_G2D]		= &bus_g2d_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_BUS_PSI]		= &bus_psi_clk.common.hw,
+		[CLK_BUS_PWM]		= &bus_pwm_clk.common.hw,
+		[CLK_BUS_IOMMU]		= &bus_iommu_clk.common.hw,
+		[CLK_MBUS_DMA]		= &mbus_dma_clk.common.hw,
+		[CLK_MBUS_VE]		= &mbus_ve_clk.common.hw,
+		[CLK_MBUS_CE]		= &mbus_ce_clk.common.hw,
+		[CLK_MBUS_NAND]		= &mbus_nand_clk.common.hw,
+		[CLK_MBUS_CSI]		= &mbus_csi_clk.common.hw,
+		[CLK_MBUS_ISP]		= &mbus_isp_clk.common.hw,
+		[CLK_MBUS_G2D]		= &mbus_g2d_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_NAND0]		= &nand0_clk.common.hw,
+		[CLK_NAND1]		= &nand1_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_SPI2]		= &bus_spi2_clk.common.hw,
+		[CLK_EMAC_25M]		= &emac_25m_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_IR_RX]		= &ir_rx_clk.common.hw,
+		[CLK_BUS_IR_RX]		= &bus_ir_rx_clk.common.hw,
+		[CLK_IR_TX]		= &ir_tx_clk.common.hw,
+		[CLK_BUS_IR_TX]		= &bus_ir_tx_clk.common.hw,
+		[CLK_BUS_GPADC]		= &bus_gpadc_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_I2S3]		= &i2s3_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2S3]		= &bus_i2s3_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_DMIC]		= &dmic_clk.common.hw,
+		[CLK_BUS_DMIC]		= &bus_dmic_clk.common.hw,
+		[CLK_AUDIO_DAC]		= &audio_codec_dac_clk.common.hw,
+		[CLK_AUDIO_ADC]		= &audio_codec_adc_clk.common.hw,
+		[CLK_AUDIO_4X]		= &audio_codec_4x_clk.common.hw,
+		[CLK_BUS_AUDIO_CODEC]	= &bus_audio_codec_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_LRADC]		= &bus_lradc_clk.common.hw,
+		[CLK_BUS_DPSS_TOP0]	= &bus_dpss_top0_clk.common.hw,
+		[CLK_BUS_DPSS_TOP1]	= &bus_dpss_top1_clk.common.hw,
+		[CLK_MIPI_DSI]		= &mipi_dsi_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_TCON_LCD]		= &tcon_lcd_clk.common.hw,
+		[CLK_BUS_TCON_LCD]	= &bus_tcon_lcd_clk.common.hw,
+		[CLK_LEDC]		= &ledc_clk.common.hw,
+		[CLK_BUS_LEDC]		= &bus_ledc_clk.common.hw,
+		[CLK_CSI_TOP]		= &csi_top_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_CSI_ISP]		= &csi_isp_clk.common.hw,
+	},
+	.num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_a100_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_G2D]		= { 0x63c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
+	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
+	[RST_BUS_HSTIMER]	= { 0x73c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PSI]		= { 0x79c, BIT(16) },
+	[RST_BUS_PWM]		= { 0x7ac, BIT(16) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_UART4]		= { 0x90c, BIT(20) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_SPI2]		= { 0x96c, BIT(18) },
+	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
+	[RST_BUS_IR_RX]		= { 0x99c, BIT(16) },
+	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
+	[RST_BUS_GPADC]		= { 0x9ec, BIT(16) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_BUS_I2S0]		= { 0xa20, BIT(16) },
+	[RST_BUS_I2S1]		= { 0xa20, BIT(17) },
+	[RST_BUS_I2S2]		= { 0xa20, BIT(18) },
+	[RST_BUS_I2S3]		= { 0xa20, BIT(19) },
+	[RST_BUS_SPDIF]		= { 0xa2c, BIT(16) },
+	[RST_BUS_DMIC]		= { 0xa4c, BIT(16) },
+	[RST_BUS_AUDIO_CODEC]	= { 0xa5c, BIT(16) },
+
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI1]		= { 0xa8c, BIT(17) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_EHCI1]		= { 0xa8c, BIT(21) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+
+	[RST_BUS_LRADC]		= { 0xa9c, BIT(16) },
+	[RST_BUS_DPSS_TOP0]	= { 0xabc, BIT(16) },
+	[RST_BUS_DPSS_TOP1]	= { 0xacc, BIT(16) },
+	[RST_BUS_MIPI_DSI]	= { 0xb4c, BIT(16) },
+	[RST_BUS_TCON_LCD]	= { 0xb7c, BIT(16) },
+	[RST_BUS_LVDS]		= { 0xbac, BIT(16) },
+	[RST_BUS_LEDC]		= { 0xbfc, BIT(16) },
+	[RST_BUS_CSI]		= { 0xc1c, BIT(16) },
+	[RST_BUS_CSI_ISP]	= { 0xc2c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = {
+	.ccu_clks	= sun50i_a100_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a100_ccu_clks),
+
+	.hw_clks	= &sun50i_a100_hw_clks,
+
+	.resets		= sun50i_a100_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a100_ccu_resets),
+};
+
+static const u32 sun50i_a100_pll_regs[] = {
+	SUN50I_A100_PLL_CPUX_REG,
+	SUN50I_A100_PLL_DDR0_REG,
+	SUN50I_A100_PLL_PERIPH0_REG,
+	SUN50I_A100_PLL_PERIPH1_REG,
+	SUN50I_A100_PLL_GPU_REG,
+	SUN50I_A100_PLL_VIDEO0_REG,
+	SUN50I_A100_PLL_VIDEO1_REG,
+	SUN50I_A100_PLL_VIDEO2_REG,
+	SUN50I_A100_PLL_VIDEO3_REG,
+	SUN50I_A100_PLL_VE_REG,
+	SUN50I_A100_PLL_COM_REG,
+	SUN50I_A100_PLL_AUDIO_REG,
+};
+
+static const u32 sun50i_a100_pll_video_regs[] = {
+	SUN50I_A100_PLL_VIDEO0_REG,
+	SUN50I_A100_PLL_VIDEO1_REG,
+	SUN50I_A100_PLL_VIDEO2_REG,
+	SUN50I_A100_PLL_VIDEO3_REG,
+};
+
+static const u32 sun50i_a100_usb2_clk_regs[] = {
+	SUN50I_A100_USB0_CLK_REG,
+	SUN50I_A100_USB1_CLK_REG,
+};
+
+static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = {
+	.common = &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable = BIT(27),
+	.lock   = BIT(28),
+};
+
+static struct ccu_mux_nb sun50i_a100_cpu_nb = {
+	.common         = &cpux_clk.common,
+	.cm             = &cpux_clk.mux,
+	.delay_us       = 1,
+	.bypass_index   = 4, /* index of pll periph0 */
+};
+
+static int sun50i_a100_ccu_probe(struct platform_device *pdev)
+{
+	void __iomem *reg;
+	u32 val;
+	int i, ret;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/* Enable the lock bits on all PLLs */
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) {
+		val = readl(reg + sun50i_a100_pll_regs[i]);
+		val |= BIT(29);
+		writel(val, reg + sun50i_a100_pll_regs[i]);
+	}
+
+	/*
+	 * In order to pass the EMI certification, the SDM function of
+	 * the peripheral 1 bus is enabled, and the frequency is still
+	 * calculated using the previous division factor.
+	 */
+	writel(0xd1303333, reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG);
+
+	val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG);
+	val |= BIT(24);
+	writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG);
+
+	/*
+	 * Force the output divider of video PLLs to 0.
+	 *
+	 * See the comment before pll-video0 definition for the reason.
+	 */
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) {
+		val = readl(reg + sun50i_a100_pll_video_regs[i]);
+		val &= ~BIT(0);
+		writel(val, reg + sun50i_a100_pll_video_regs[i]);
+	}
+
+	/*
+	 * Enforce m1 = 0, m0 = 1 for Audio PLL
+	 *
+	 * See the comment before pll-audio definition for the reason.
+	 */
+	val = readl(reg + SUN50I_A100_PLL_AUDIO_REG);
+	val &= ~BIT(1);
+	val |= BIT(0);
+	writel(val, reg + SUN50I_A100_PLL_AUDIO_REG);
+
+	/*
+	 * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
+	 *
+	 * This clock mux is still mysterious, and the code just enforces
+	 * it to have a valid clock parent.
+	 */
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_usb2_clk_regs); i++) {
+		val = readl(reg + sun50i_a100_usb2_clk_regs[i]);
+		val &= ~GENMASK(25, 24);
+		writel(val, reg + sun50i_a100_usb2_clk_regs[i]);
+	}
+
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_ccu_desc);
+	if (ret)
+		return ret;
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun50i_a100_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun50i_a100_cpu_nb);
+
+	return 0;
+}
+
+static const struct of_device_id sun50i_a100_ccu_ids[] = {
+	{ .compatible = "allwinner,sun50i-a100-ccu" },
+	{ }
+};
+
+static struct platform_driver sun50i_a100_ccu_driver = {
+	.probe	= sun50i_a100_ccu_probe,
+	.driver	= {
+		.name	= "sun50i-a100-ccu",
+		.of_match_table	= sun50i_a100_ccu_ids,
+	},
+};
+module_platform_driver(sun50i_a100_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.h b/drivers/clk/sunxi-ng/ccu-sun50i-a100.h
new file mode 100644
index 0000000..a599320
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#ifndef _CCU_SUN50I_A100_H_
+#define _CCU_SUN50I_A100_H_
+
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+
+#define CLK_OSC12M		0
+#define CLK_PLL_CPUX		1
+#define CLK_PLL_DDR0		2
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X	4
+#define CLK_PLL_PERIPH1		5
+#define CLK_PLL_PERIPH1_2X	6
+#define CLK_PLL_GPU		7
+#define CLK_PLL_VIDEO0		8
+#define CLK_PLL_VIDEO0_2X	9
+#define CLK_PLL_VIDEO0_4X	10
+#define CLK_PLL_VIDEO1		11
+#define CLK_PLL_VIDEO1_2X	12
+#define CLK_PLL_VIDEO1_4X	13
+#define CLK_PLL_VIDEO2		14
+#define CLK_PLL_VIDEO2_2X	15
+#define CLK_PLL_VIDEO2_4X	16
+#define CLK_PLL_VIDEO3		17
+#define CLK_PLL_VIDEO3_2X	18
+#define CLK_PLL_VIDEO3_4X	19
+#define CLK_PLL_VE		20
+#define CLK_PLL_COM		21
+#define CLK_PLL_COM_AUDIO	22
+#define CLK_PLL_AUDIO		23
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI			25
+#define CLK_CPUX_APB		26
+#define CLK_PSI_AHB1_AHB2	27
+#define CLK_AHB3		28
+
+/* APB1 clock exported for PIO */
+
+#define CLK_APB2		30
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_BUS_DRAM		58
+
+#define CLK_NUMBER		(CLK_CSI_ISP + 1)
+
+#endif /* _CCU_SUN50I_A100_H_ */
diff --git a/include/dt-bindings/clock/sun50i-a100-ccu.h b/include/dt-bindings/clock/sun50i-a100-ccu.h
new file mode 100644
index 0000000..8cdf563
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a100-ccu.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A100_H_
+#define _DT_BINDINGS_CLK_SUN50I_A100_H_
+
+#define CLK_PLL_PERIPH0		3
+
+#define CLK_CPUX		24
+
+#define CLK_APB1		29
+
+#define CLK_MBUS		31
+#define CLK_DE			32
+#define CLK_BUS_DE		33
+#define CLK_G2D			34
+#define CLK_BUS_G2D		35
+#define CLK_GPU			36
+#define CLK_BUS_GPU		37
+#define CLK_CE			38
+#define CLK_BUS_CE		39
+#define CLK_VE			40
+#define CLK_BUS_VE		41
+#define CLK_BUS_DMA		42
+#define CLK_BUS_MSGBOX		43
+#define CLK_BUS_SPINLOCK	44
+#define CLK_BUS_HSTIMER		45
+#define CLK_AVS			46
+#define CLK_BUS_DBG		47
+#define CLK_BUS_PSI		48
+#define CLK_BUS_PWM		49
+#define CLK_BUS_IOMMU		50
+#define CLK_MBUS_DMA		51
+#define CLK_MBUS_VE		52
+#define CLK_MBUS_CE		53
+#define CLK_MBUS_NAND		54
+#define CLK_MBUS_CSI		55
+#define CLK_MBUS_ISP		56
+#define CLK_MBUS_G2D		57
+
+#define CLK_NAND0		59
+#define CLK_NAND1		60
+#define CLK_BUS_NAND		61
+#define CLK_MMC0		62
+#define CLK_MMC1		63
+#define CLK_MMC2		64
+#define CLK_MMC3		65
+#define CLK_BUS_MMC0		66
+#define CLK_BUS_MMC1		67
+#define CLK_BUS_MMC2		68
+#define CLK_BUS_UART0		69
+#define CLK_BUS_UART1		70
+#define CLK_BUS_UART2		71
+#define CLK_BUS_UART3		72
+#define CLK_BUS_UART4		73
+#define CLK_BUS_I2C0		74
+#define CLK_BUS_I2C1		75
+#define CLK_BUS_I2C2		76
+#define CLK_BUS_I2C3		77
+#define CLK_SPI0		78
+#define CLK_SPI1		79
+#define CLK_SPI2		80
+#define CLK_BUS_SPI0		81
+#define CLK_BUS_SPI1		82
+#define CLK_BUS_SPI2		83
+#define CLK_EMAC_25M		84
+#define CLK_BUS_EMAC		85
+#define CLK_IR_RX		86
+#define CLK_BUS_IR_RX		87
+#define CLK_IR_TX		88
+#define CLK_BUS_IR_TX		89
+#define CLK_BUS_GPADC		90
+#define CLK_BUS_THS		91
+#define CLK_I2S0		92
+#define CLK_I2S1		93
+#define CLK_I2S2		94
+#define CLK_I2S3		95
+#define CLK_BUS_I2S0		96
+#define CLK_BUS_I2S1		97
+#define CLK_BUS_I2S2		98
+#define CLK_BUS_I2S3		99
+#define CLK_SPDIF		100
+#define CLK_BUS_SPDIF		101
+#define CLK_DMIC		102
+#define CLK_BUS_DMIC		103
+#define CLK_AUDIO_DAC		104
+#define CLK_AUDIO_ADC		105
+#define CLK_AUDIO_4X		106
+#define CLK_BUS_AUDIO_CODEC	107
+#define CLK_USB_OHCI0		108
+#define CLK_USB_PHY0		109
+#define CLK_USB_OHCI1		110
+#define CLK_USB_PHY1		111
+#define CLK_BUS_OHCI0		112
+#define CLK_BUS_OHCI1		113
+#define CLK_BUS_EHCI0		114
+#define CLK_BUS_EHCI1		115
+#define CLK_BUS_OTG		116
+#define CLK_BUS_LRADC		117
+#define CLK_BUS_DPSS_TOP0	118
+#define CLK_BUS_DPSS_TOP1	119
+#define CLK_MIPI_DSI		120
+#define CLK_BUS_MIPI_DSI	121
+#define CLK_TCON_LCD		122
+#define CLK_BUS_TCON_LCD	123
+#define CLK_LEDC		124
+#define CLK_BUS_LEDC		125
+#define CLK_CSI_TOP		126
+#define CLK_CSI0_MCLK		127
+#define CLK_CSI1_MCLK		128
+#define CLK_BUS_CSI		129
+#define CLK_CSI_ISP		130
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_A100_H_ */
diff --git a/include/dt-bindings/clock/sun50i-a100-r-ccu.h b/include/dt-bindings/clock/sun50i-a100-r-ccu.h
new file mode 100644
index 0000000..8a6cc5c
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a100-r-ccu.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_
+
+#define CLK_R_APB1		2
+
+#define CLK_R_APB1_TIMER	4
+#define CLK_R_APB1_TWD		5
+#define CLK_R_APB1_PWM		6
+#define CLK_R_APB1_BUS_PWM	7
+#define CLK_R_APB1_PPU		8
+#define CLK_R_APB2_UART		9
+#define CLK_R_APB2_I2C0		10
+#define CLK_R_APB2_I2C1		11
+#define CLK_R_APB1_IR		12
+#define CLK_R_APB1_BUS_IR	13
+#define CLK_R_AHB_BUS_RTC	14
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-a100-ccu.h b/include/dt-bindings/reset/sun50i-a100-ccu.h
new file mode 100644
index 0000000..17b8b66
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a100-ccu.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_A100_H_
+#define _DT_BINDINGS_RESET_SUN50I_A100_H_
+
+#define RST_MBUS		0
+#define RST_BUS_DE		1
+#define RST_BUS_G2D		2
+#define RST_BUS_GPU		3
+#define RST_BUS_CE		4
+#define RST_BUS_VE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MSGBOX		7
+#define RST_BUS_SPINLOCK	8
+#define RST_BUS_HSTIMER		9
+#define RST_BUS_DBG		10
+#define RST_BUS_PSI		11
+#define RST_BUS_PWM		12
+#define RST_BUS_DRAM		13
+#define RST_BUS_NAND		14
+#define RST_BUS_MMC0		15
+#define RST_BUS_MMC1		16
+#define RST_BUS_MMC2		17
+#define RST_BUS_UART0		18
+#define RST_BUS_UART1		19
+#define RST_BUS_UART2		20
+#define RST_BUS_UART3		21
+#define RST_BUS_UART4		22
+#define RST_BUS_I2C0		23
+#define RST_BUS_I2C1		24
+#define RST_BUS_I2C2		25
+#define RST_BUS_I2C3		26
+#define RST_BUS_SPI0		27
+#define RST_BUS_SPI1		28
+#define RST_BUS_SPI2		29
+#define RST_BUS_EMAC		30
+#define RST_BUS_IR_RX		31
+#define RST_BUS_IR_TX		32
+#define RST_BUS_GPADC		33
+#define RST_BUS_THS		34
+#define RST_BUS_I2S0		35
+#define RST_BUS_I2S1		36
+#define RST_BUS_I2S2		37
+#define RST_BUS_I2S3		38
+#define RST_BUS_SPDIF		39
+#define RST_BUS_DMIC		40
+#define RST_BUS_AUDIO_CODEC	41
+#define RST_USB_PHY0		42
+#define RST_USB_PHY1		43
+#define RST_BUS_OHCI0		44
+#define RST_BUS_OHCI1		45
+#define RST_BUS_EHCI0		46
+#define RST_BUS_EHCI1		47
+#define RST_BUS_OTG		48
+#define RST_BUS_LRADC		49
+#define RST_BUS_DPSS_TOP0	50
+#define RST_BUS_DPSS_TOP1	51
+#define RST_BUS_MIPI_DSI	52
+#define RST_BUS_TCON_LCD	53
+#define RST_BUS_LVDS		54
+#define RST_BUS_LEDC		55
+#define RST_BUS_CSI		56
+#define RST_BUS_CSI_ISP		57
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_A100_H_ */
diff --git a/include/dt-bindings/reset/sun50i-a100-r-ccu.h b/include/dt-bindings/reset/sun50i-a100-r-ccu.h
new file mode 100644
index 0000000..2bf1ed4
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a100-r-ccu.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_
+
+#define RST_R_APB1_TIMER	0
+#define RST_R_APB1_BUS_PWM	1
+#define RST_R_APB1_PPU		2
+#define RST_R_APB2_UART		3
+#define RST_R_APB2_I2C0		4
+#define RST_R_APB2_I2C1		5
+#define RST_R_APB1_BUS_IR	6
+#define RST_R_AHB_BUS_RTC	7
+
+#endif /* _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_ */
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
  2020-06-22  2:58 ` [PATCH v2 01/11] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU Frank Lee
  2020-06-22  2:58 ` [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU Frank Lee
@ 2020-06-22  2:58 ` Frank Lee
  2020-06-29 15:01   ` Maxime Ripard
  2020-06-22  2:59 ` [PATCH v2 04/11] pinctrl: sunxi: add support for the Allwinner A100 pin controller Frank Lee
                   ` (7 subsequent siblings)
  10 siblings, 1 reply; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:58 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Add device tree binding Documentation details for A100 pinctrl driver,
whic has an r pin controller and a pin controller with more irq lines.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml       | 72 +++++++++++++---------
 1 file changed, 43 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfefd09..2ac5eb5 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -48,6 +48,8 @@ properties:
       - allwinner,sun9i-a80-r-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
+      - allwinner,sun50i-a100-pinctrl
+      - allwinner,sun50i-a100-r-pinctrl
       - allwinner,sun50i-h5-pinctrl
       - allwinner,sun50i-h6-pinctrl
       - allwinner,sun50i-h6-r-pinctrl
@@ -144,75 +146,87 @@ allOf:
   # FIXME: We should have the pin bank supplies here, but not a lot of
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
-
   - if:
       properties:
         compatible:
           enum:
-            - allwinner,sun9i-a80-pinctrl
+            - allwinner,sun50i-a100-pinctrl
 
     then:
       properties:
         interrupts:
-          minItems: 5
-          maxItems: 5
+          minItems: 7
+          maxItems: 7
 
     else:
       if:
         properties:
           compatible:
             enum:
-              - allwinner,sun6i-a31-pinctrl
-              - allwinner,sun6i-a31s-pinctrl
-              - allwinner,sun50i-h6-pinctrl
+              - allwinner,sun9i-a80-pinctrl
 
       then:
         properties:
           interrupts:
-            minItems: 4
-            maxItems: 4
+            minItems: 5
+            maxItems: 5
 
       else:
         if:
           properties:
             compatible:
               enum:
-                - allwinner,sun8i-a23-pinctrl
-                - allwinner,sun8i-a83t-pinctrl
-                - allwinner,sun50i-a64-pinctrl
-                - allwinner,sun50i-h5-pinctrl
-                - allwinner,suniv-f1c100s-pinctrl
+                - allwinner,sun6i-a31-pinctrl
+                - allwinner,sun6i-a31s-pinctrl
+                - allwinner,sun50i-h6-pinctrl
 
         then:
           properties:
             interrupts:
-              minItems: 3
-              maxItems: 3
+              minItems: 4
+              maxItems: 4
 
         else:
           if:
             properties:
               compatible:
                 enum:
-                  - allwinner,sun6i-a31-r-pinctrl
-                  - allwinner,sun8i-a33-pinctrl
-                  - allwinner,sun8i-h3-pinctrl
-                  - allwinner,sun8i-v3-pinctrl
-                  - allwinner,sun8i-v3s-pinctrl
-                  - allwinner,sun9i-a80-r-pinctrl
-                  - allwinner,sun50i-h6-r-pinctrl
+                  - allwinner,sun8i-a23-pinctrl
+                  - allwinner,sun8i-a83t-pinctrl
+                  - allwinner,sun50i-a64-pinctrl
+                  - allwinner,sun50i-h5-pinctrl
+                  - allwinner,suniv-f1c100s-pinctrl
 
           then:
             properties:
               interrupts:
-                minItems: 2
-                maxItems: 2
+                minItems: 3
+                maxItems: 3
 
           else:
-            properties:
-              interrupts:
-                minItems: 1
-                maxItems: 1
+            if:
+              properties:
+                compatible:
+                  enum:
+                    - allwinner,sun6i-a31-r-pinctrl
+                    - allwinner,sun8i-a33-pinctrl
+                    - allwinner,sun8i-h3-pinctrl
+                    - allwinner,sun8i-v3-pinctrl
+                    - allwinner,sun8i-v3s-pinctrl
+                    - allwinner,sun9i-a80-r-pinctrl
+                    - allwinner,sun50i-h6-r-pinctrl
+
+            then:
+              properties:
+                interrupts:
+                  minItems: 2
+                  maxItems: 2
+
+            else:
+              properties:
+                interrupts:
+                  minItems: 1
+                  maxItems: 1
 
 additionalProperties: false
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 04/11] pinctrl: sunxi: add support for the Allwinner A100 pin controller
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (2 preceding siblings ...)
  2020-06-22  2:58 ` [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-22  2:59 ` [PATCH v2 05/11] dt-bindings: nvmem: SID: add binding for A100's SID controller Frank Lee
                   ` (6 subsequent siblings)
  10 siblings, 0 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

This commit introduces support for the pin controller on A100.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 drivers/pinctrl/sunxi/Kconfig                 |  10 +
 drivers/pinctrl/sunxi/Makefile                |   2 +
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 105 ++++
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c   | 708 ++++++++++++++++++++++++++
 4 files changed, 825 insertions(+)
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c

diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index f7aae20..5932935 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -94,6 +94,16 @@ config PINCTRL_SUN50I_A64_R
 	default ARM64 && ARCH_SUNXI
 	select PINCTRL_SUNXI
 
+config PINCTRL_SUN50I_A100
+	bool "Support for the Allwinner A100 PIO"
+	default ARM64 && ARCH_SUNXI
+	select PINCTRL_SUNXI
+
+config PINCTRL_SUN50I_A100_R
+	bool "Support for the Allwinner A100 R-PIO"
+	default ARM64 && ARCH_SUNXI
+	select PINCTRL_SUNXI
+
 config PINCTRL_SUN50I_H5
 	bool "Support for the Allwinner H5 PIO"
 	default ARM64 && ARCH_SUNXI
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index fafcdae..8b7ff0d 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -13,6 +13,8 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23_R)	+= pinctrl-sun8i-a23-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_A33)		+= pinctrl-sun8i-a33.o
 obj-$(CONFIG_PINCTRL_SUN50I_A64)	+= pinctrl-sun50i-a64.o
 obj-$(CONFIG_PINCTRL_SUN50I_A64_R)	+= pinctrl-sun50i-a64-r.o
+obj-$(CONFIG_PINCTRL_SUN50I_A100)	+= pinctrl-sun50i-a100.o
+obj-$(CONFIG_PINCTRL_SUN50I_A100_R)	+= pinctrl-sun50i-a100-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T)	+= pinctrl-sun8i-a83t.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T_R)	+= pinctrl-sun8i-a83t-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
new file mode 100644
index 0000000..6e4a96c
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ *
+ * Based on:
+ * huangshuosheng <huangshuosheng@allwinnertech.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin a100_r_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_i2c0"),	/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_i2c0"),	/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_uart0"),	/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_uart0"),	/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* MS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* CK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* DO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* DI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_i2c1"),	/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_i2c1"),	/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_pwm"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_cpu"),		/* CUR_W */
+		  SUNXI_FUNCTION(0x3, "s_cir"),		/* IN */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)),
+};
+
+static const struct sunxi_pinctrl_desc a100_r_pinctrl_data = {
+	.pins = a100_r_pins,
+	.npins = ARRAY_SIZE(a100_r_pins),
+	.pin_base = PL_BASE,
+	.irq_banks = 1,
+};
+
+static int a100_r_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_init(pdev, &a100_r_pinctrl_data);
+}
+
+static const struct of_device_id a100_r_pinctrl_match[] = {
+	{ .compatible = "allwinner,sun50i-a100-r-pinctrl", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a100_r_pinctrl_match);
+
+static struct platform_driver a100_r_pinctrl_driver = {
+	.probe	= a100_r_pinctrl_probe,
+	.driver	= {
+		.name		= "sun50iw10p1-r-pinctrl",
+		.of_match_table	= a100_r_pinctrl_match,
+	},
+};
+module_platform_driver(a100_r_pinctrl_driver);
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
new file mode 100644
index 0000000..f48b2a7
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ *
+ * Based on:
+ * huangshuosheng <huangshuosheng@allwinnertech.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin a100_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* TX */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* CS */
+		  SUNXI_FUNCTION(0x4, "jtag"),		/* MS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* RX */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "jtag"),		/* CK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* MOSI */
+		  SUNXI_FUNCTION(0x4, "jtag"),		/* DO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* MISO */
+		  SUNXI_FUNCTION(0x4, "jtag"),		/* DI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1"),		/* SCK */
+		  SUNXI_FUNCTION(0x3, "i2s0"),		/* MCLK */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* MS_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1"),		/* SDA */
+		  SUNXI_FUNCTION(0x3, "i2s0"),		/* BCLK */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* CK_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s0"),		/* LRCK */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* DO_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spdif"),		/* DIN */
+		  SUNXI_FUNCTION(0x3, "i2s0_dout0"),	/* DOUT0 */
+		  SUNXI_FUNCTION(0x4, "i2s0_din1"),	/* DIN1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spdif"),		/* DOUT */
+		  SUNXI_FUNCTION(0x3, "i2s0_din0"),	/* DIN0 */
+		  SUNXI_FUNCTION(0x4, "i2s0_dout1"),	/* DOUT1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart0"),		/* TX */
+		  SUNXI_FUNCTION(0x3, "i2c0"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* DI_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart0"),		/* RX */
+		  SUNXI_FUNCTION(0x3, "i2c0"),		/* SDA */
+		  SUNXI_FUNCTION(0x4, "pwm1"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)),
+	/* HOLE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* WE */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* DS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* ALE */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* RST */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* CLE */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* MOSI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* CE1 */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* CS0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* CE0 */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* MISO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* RE */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* RB0 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* CMD */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* RB1 */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* CS1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ7 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ6 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D4 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ5 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ4 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D5 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 11)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQS */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 12)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ3 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 13)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ2 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D6 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 14)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ1 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* WP */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 15)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* DQ0 */
+		  SUNXI_FUNCTION(0x3, "mmc2"),		/* D7 */
+		  SUNXI_FUNCTION(0x4, "spi0"),		/* HOLD */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 16)),
+	/* HOLE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* D0P */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DP0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* D0N */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DM0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* D1P */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DP1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* D1N */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DM1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* D2P */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* CKP */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* D2N */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* CKM */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D10 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* CKP */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DP2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D11 */
+		  SUNXI_FUNCTION(0x3, "lvds0"),		/* CKN */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DM2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D12 */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DP3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D13 */
+		  SUNXI_FUNCTION(0x4, "dsi0"),		/* DM3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D14 */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* CS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D15 */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 11)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D18 */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 12)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D19 */
+		  SUNXI_FUNCTION(0x4, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 13)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D20 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 14)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D21 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 15)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D22 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 16)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D23 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 17)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 18),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 18)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 19),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* DE */
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 19)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 20),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x3, "pwm2"),
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 20)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 21),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "pwm3"),
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 21)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 22),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm1"),
+		  SUNXI_FUNCTION(0x4, "i2c0"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 22)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 23),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm0"),
+		  SUNXI_FUNCTION(0x4, "i2c0"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 2, 23)),
+	/* HOLE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* MCLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c3"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c3"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* MCLK */
+		  SUNXI_FUNCTION(0x3, "pll"),		/* LOCK_DBG */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* MCLK */
+		  SUNXI_FUNCTION(0x5, "ledc"),		/* LEDC */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "bist0"),		/* RESULT0 */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* BCLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* SM_VS */
+		  SUNXI_FUNCTION(0x3, "bist0"),		/* RESULT1 */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* LRCK */
+		  SUNXI_FUNCTION(0x5, "tcon0"),		/* TRIG */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3,	7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "bist0"),		/* RESULT2 */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* DOUT0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "bist0"),		/* RESULT3 */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* DIN0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 3, 9)),
+	/* HOLE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* MS1 */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* MS_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* DI1 */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* DI_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CMD */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* DO */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* DO_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "uart0"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* CK */
+		  SUNXI_FUNCTION(0x4, "jtag_gpu"),	/* CK_GPU */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 4, 6)),
+	/* HOLE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CMD */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* CTS */
+		  SUNXI_FUNCTION(0x3, "i2s1"),		/* MCLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s1"),		/* BCLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s1"),		/* LRCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 11)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s1_dout0"),	/* DOUT0 */
+		  SUNXI_FUNCTION(0x4, "i2s1_din1"),	/* DIN1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 12)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 13),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s1_din0"),	/* DIN0 */
+		  SUNXI_FUNCTION(0x4, "i2s1_dout1"),	/* DOUT1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 5, 13)),
+	/* HOLE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0"),		/* SCK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* RXD1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 0)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0"),		/* SDA */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* RXD0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 1)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1"),		/* SCK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* RXCTL */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 2)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1"),		/* SDA */
+		  SUNXI_FUNCTION(0x3, "cir0"),		/* OUT */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* CLKIN */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 3)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart3"),		/* TX */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* CS */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* TXD1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 4)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart3"),		/* RX */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "ledc"),
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* TXD0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 5)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart3"),		/* RTS */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* TXCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 6)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart3"),		/* CTS */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION(0x4, "spdif"),		/* OUT */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* TXCTL */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 7)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dmic"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* CS */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* MCLK */
+		  SUNXI_FUNCTION(0x5, "i2s2_din2"),	/* DIN2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 8)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dmic"),		/* DATA0 */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* BCLK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* MDC */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 9)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dmic"),		/* DATA1 */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* MOSI */
+		  SUNXI_FUNCTION(0x4, "i2s2"),		/* LRCK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* MDIO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 10)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dmic"),		/* DATA2 */
+		  SUNXI_FUNCTION(0x3, "spi2"),		/* MISO */
+		  SUNXI_FUNCTION(0x4, "i2s2_dout0"),	/* DOUT0 */
+		  SUNXI_FUNCTION(0x5, "i2s2_din1"),	/* DIN1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 11)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "dmic"),		/* DATA3 */
+		  SUNXI_FUNCTION(0x3, "i2c3"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "i2s2_din0"),	/* DIN0 */
+		  SUNXI_FUNCTION(0x5, "i2s2_dout1"),	/* DOUT1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 12)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 13),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2c3"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "i2s3"),		/* MCLK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* EPHY */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 13)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 14),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "i2s3"),		/* BCLK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* RXD3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 14)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 15),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "i2s3"),		/* LRCK */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* RXD2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 15)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 16),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s3_dout0"),	/* DOUT0 */
+		  SUNXI_FUNCTION(0x4, "i2s3_din1"),	/* DIN1 */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* RXCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 16)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "i2s3_dout1"),	/* DOUT1 */
+		  SUNXI_FUNCTION(0x4, "i2s3_din0"),	/* DIN0 */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* TXD3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 17)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 18),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "cir0"),		/* OUT */
+		  SUNXI_FUNCTION(0x3, "i2s3_dout2"),	/* DOUT2 */
+		  SUNXI_FUNCTION(0x4, "i2s3_din2"),	/* DIN2 */
+		  SUNXI_FUNCTION(0x5, "emac0"),		/* TXD2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 18)),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 19),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "cir0"),		/* IN */
+		  SUNXI_FUNCTION(0x3, "i2s3_dout3"),	/* DOUT3 */
+		  SUNXI_FUNCTION(0x4, "i2s3_din3"),	/* DIN3 */
+		  SUNXI_FUNCTION(0x5, "ledc"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 19)),
+};
+
+static const unsigned int a100_irq_bank_map[] = { 0, 1, 2, 3, 4, 5, 6};
+
+static const struct sunxi_pinctrl_desc a100_pinctrl_data = {
+	.pins = a100_pins,
+	.npins = ARRAY_SIZE(a100_pins),
+	.irq_banks = 7,
+	.irq_bank_map = a100_irq_bank_map,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
+};
+
+static int a100_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_init(pdev, &a100_pinctrl_data);
+}
+
+static const struct of_device_id a100_pinctrl_match[] = {
+	{ .compatible = "allwinner,sun50i-a100-pinctrl", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a100_pinctrl_match);
+
+static struct platform_driver a100_pinctrl_driver = {
+	.probe	= a100_pinctrl_probe,
+	.driver	= {
+		.name		= "sun50i-a100-pinctrl",
+		.of_match_table	= a100_pinctrl_match,
+	},
+};
+module_platform_driver(a100_pinctrl_driver);
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 05/11] dt-bindings: nvmem: SID: add binding for A100's SID controller
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (3 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 04/11] pinctrl: sunxi: add support for the Allwinner A100 pin controller Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-22  2:59 ` [PATCH v2 06/11] nvmem: sunxi-sid: add support " Frank Lee
                   ` (5 subsequent siblings)
  10 siblings, 0 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Add a binding for A100's SID controller.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index daf1321..c1a0b32 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -21,6 +21,7 @@ properties:
       - allwinner,sun8i-a83t-sid
       - allwinner,sun8i-h3-sid
       - allwinner,sun50i-a64-sid
+      - allwinner,sun50i-a100-sid
       - allwinner,sun50i-h5-sid
       - allwinner,sun50i-h6-sid
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 06/11] nvmem: sunxi-sid: add support for A100's SID controller
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (4 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 05/11] dt-bindings: nvmem: SID: add binding for A100's SID controller Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-29 15:07   ` Maxime Ripard
  2020-06-22  2:59 ` [PATCH v2 07/11] dt-bindings: thermal: sun8i: Add binding for A100's THS controller Frank Lee
                   ` (4 subsequent siblings)
  10 siblings, 1 reply; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Add support for A100's SID controller.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 drivers/nvmem/sunxi_sid.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index e26ef1b..8ac074b 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -189,6 +189,11 @@ static int sunxi_sid_probe(struct platform_device *pdev)
 	.need_register_readout = true,
 };
 
+static const struct sunxi_sid_cfg sun50i_a100_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+};
+
 static const struct sunxi_sid_cfg sun50i_h6_cfg = {
 	.value_offset = 0x200,
 	.size = 0x200,
@@ -200,6 +205,7 @@ static int sunxi_sid_probe(struct platform_device *pdev)
 	{ .compatible = "allwinner,sun8i-a83t-sid", .data = &sun50i_a64_cfg },
 	{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
 	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun50i-a100-sid", .data = &sun50i_a100_cfg },
 	{ .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
 	{ .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
 	{/* sentinel */},
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 07/11] dt-bindings: thermal: sun8i: Add binding for A100's THS controller
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (5 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 06/11] nvmem: sunxi-sid: add support " Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-22  2:59 ` [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support Frank Lee
                   ` (3 subsequent siblings)
  10 siblings, 0 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Add a binding for A100's ths controller.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml       | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 8736926..9d40fc7 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -17,6 +17,7 @@ properties:
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
       - allwinner,sun50i-a64-ths
+      - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
 
@@ -61,7 +62,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-h6-ths
+            enum:
+              - allwinner,sun50i-a100-ths
+              - allwinner,sun50i-h6-ths
 
     then:
       properties:
@@ -103,6 +106,7 @@ allOf:
               - const: allwinner,sun8i-h3-ths
               - const: allwinner,sun8i-r40-ths
               - const: allwinner,sun50i-a64-ths
+              - const: allwinner,sun50i-a100-ths
               - const: allwinner,sun50i-h5-ths
               - const: allwinner,sun50i-h6-ths
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (6 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 07/11] dt-bindings: thermal: sun8i: Add binding for A100's THS controller Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-29 15:10   ` Maxime Ripard
  2020-06-22  2:59 ` [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Frank Lee
                   ` (2 subsequent siblings)
  10 siblings, 1 reply; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

This patch add thermal sensor controller support for A100,
which is similar to the previous ones.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 drivers/thermal/sun8i_thermal.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 74d73be..7a69442 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -590,6 +590,19 @@ static int sun8i_ths_remove(struct platform_device *pdev)
 	.calc_temp = sun8i_ths_calc_temp,
 };
 
+static const struct ths_thermal_chip sun50i_a100_ths = {
+	.sensor_num = 3,
+	.has_bus_clk_reset = true,
+	.ft_deviation = 8000,
+	.offset = 187744,
+	.scale = 672,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
 static const struct ths_thermal_chip sun50i_h5_ths = {
 	.sensor_num = 2,
 	.has_mod_clk = true,
@@ -619,6 +632,7 @@ static int sun8i_ths_remove(struct platform_device *pdev)
 	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
 	{ .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
 	{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+	{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
 	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
 	{ /* sentinel */ },
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (7 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-29 15:21   ` Maxime Ripard
  2020-06-22  2:59 ` [PATCH v2 10/11] dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings Frank Lee
  2020-06-22  2:59 ` [PATCH v2 11/11] arm64: allwinner: A100: add support for Allwinner Perf1 board Frank Lee
  10 siblings, 1 reply; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds
the basical DTSI file of it, including the clock, i2c, pins, sid, ths,
and UART support.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 337 +++++++++++++++++++++++++
 1 file changed, 337 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 0000000..5133897
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	iosc: internal-osc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-accuracy = <300000000>;
+		clock-output-names = "iosc";
+		#clock-cells = <0>;
+	};
+
+	dcxo24M: dcxo24M_clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "dcxo24M";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k_clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "osc32k";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-a100-ccu";
+			reg = <0x0 0x03001000 0x0 0x1000>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0x03021000 0x0 0x1000>,
+			      <0x0 0x03022000 0x0 0x2000>,
+			      <0x0 0x03024000 0x0 0x2000>,
+			      <0x0 0x03026000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		sid@3006000 {
+			compatible = "allwinner,sun50i-a100-sid";
+			reg = <0x0 0x03006000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: calib@14 {
+				reg = <0x14 8>;
+			};
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-a100-pinctrl";
+			reg = <0x0 0x0300b000 0x0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000000 0x0 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000400 0x0 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000800 0x0 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000c00 0x0 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05001000 0x0 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002000 0x0 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002400 0x0 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002800 0x0 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002c00 0x0 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-a100-ths";
+			reg = <0x0 0x05070400 0x0 0x100>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-a100-r-ccu";
+			reg = <0x0 0x07010000 0x0 0x300>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-a100-r-pinctrl";
+			reg = <0x0 0x07022000 0x0 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c0_pins: r-i2c0-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c0";
+			};
+
+			r_i2c1_pins: r-i2c1-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c1";
+			};
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x07081400 0x0 0x400>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_i2c1: i2c@7081800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x07081800 0x0 0x400>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal_zone {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+		gpu_thermal_zone{
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+		ddr_thermal_zone{
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+};
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 10/11] dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (8 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  2020-06-22  2:59 ` [PATCH v2 11/11] arm64: allwinner: A100: add support for Allwinner Perf1 board Frank Lee
  10 siblings, 0 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

Document board compatible names for Allwinner A100 Perf1 Board.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index abf2d97..8cdc677 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -16,6 +16,11 @@ properties:
   compatible:
     oneOf:
 
+      - description: Allwinner A100 Perf1 Board
+        items:
+          - const: allwinner,a100-perf1
+          - const: allwinner,sun50i-a100
+
       - description: Allwinner A23 Evaluation Board
         items:
           - const: allwinner,sun8i-a23-evb
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH v2 11/11] arm64: allwinner: A100: add support for Allwinner Perf1 board
  2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
                   ` (9 preceding siblings ...)
  2020-06-22  2:59 ` [PATCH v2 10/11] dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings Frank Lee
@ 2020-06-22  2:59 ` Frank Lee
  10 siblings, 0 replies; 17+ messages in thread
From: Frank Lee @ 2020-06-22  2:59 UTC (permalink / raw)
  To: robh+dt, mripard, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage
  Cc: devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong, Frank Lee

A100 perf1 is an Allwinner A100-based SBC, with the following features:

- 1GiB DDR3 DRAM
- AXP803 PMIC
- 2 USB 2.0 ports
- MicroSD slot and on-board eMMC module
- on-board Nand flash
- ···

Adds initial support for it, including the UART.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 arch/arm64/boot/dts/allwinner/Makefile             |  1 +
 .../dts/allwinner/sun50i-a100-allwinner-perf1.dts  | 27 ++++++++++++++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index e4d3cd0..ab780db 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
new file mode 100644
index 0000000..d03fa26
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+
+/{
+	model = "Allwinner A100 Perf1";
+	compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU
  2020-06-22  2:58 ` [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU Frank Lee
@ 2020-06-29 14:58   ` Maxime Ripard
  0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2020-06-29 14:58 UTC (permalink / raw)
  To: Frank Lee
  Cc: robh+dt, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage,
	devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong

[-- Attachment #1: Type: text/plain, Size: 46128 bytes --]

On Mon, Jun 22, 2020 at 10:58:58AM +0800, Frank Lee wrote:
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#ifndef _CCU_SUN50IW10_R_H
> +#define _CCU_SUN50IW10_R_H
> +
> +#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
> +#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
> +
> +#define CLK_R_CPUS		0
> +#define CLK_R_AHB		1
> +
> +/* exported except APB1 for R_PIO */
> +
> +#define CLK_R_APB2		3
> +
> +#define CLK_NUMBER	(CLK_R_AHB_BUS_RTC + 1)
> +
> +#endif /* _CCU_SUN50IW10_R_H */

You've been using the public name for all of the other header guards as
far as I can tell, it would be great to use it here too

> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
> new file mode 100644
> index 0000000..57c6910
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
> @@ -0,0 +1,1261 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +
> +#include "ccu-sun50i-a100.h"
> +
> +/*
> + * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
> + * P should only be used for output frequencies lower than 288 MHz.
> + *
> + * For now we can just model it as a multiplier clock, and force P to /1.
> + *
> + * The M factor is present in the register's description, but not in the
> + * frequency formula, and it's documented as "M is only used for backdoor
> + * testing", so it's not modelled and then force to 0.
> + */
> +#define SUN50I_A100_PLL_CPUX_REG		0x000
> +static struct ccu_mult pll_cpux_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.mult		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.common		= {
> +		.reg		= 0x000,
> +		.hw.init	= CLK_HW_INIT("pll-cpux", "dcxo24M",
> +					      &ccu_mult_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
> +#define SUN50I_A100_PLL_DDR0_REG		0x010
> +static struct ccu_nkmp pll_ddr0_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
> +	.common		= {
> +		.reg		= 0x010,
> +		.hw.init	= CLK_HW_INIT("pll-ddr0", "dcxo24M",
> +					      &ccu_nkmp_ops,
> +					      CLK_SET_RATE_UNGATE |
> +					      CLK_IS_CRITICAL),
> +	},
> +};
> +
> +#define SUN50I_A100_PLL_PERIPH0_REG	0x020
> +static struct ccu_nkmp pll_periph0_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
> +	.fixed_post_div	= 2,
> +	.common		= {
> +		.reg		= 0x020,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV,
> +		.hw.init	= CLK_HW_INIT("pll-periph0", "dcxo24M",
> +					      &ccu_nkmp_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +#define SUN50I_A100_PLL_PERIPH1_REG	0x028
> +static struct ccu_nkmp pll_periph1_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
> +	.fixed_post_div	= 2,
> +	.common		= {
> +		.reg		= 0x028,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV,
> +		.hw.init	= CLK_HW_INIT("pll-periph1", "dcxo24M",
> +					      &ccu_nkmp_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG	0x128
> +
> +#define SUN50I_A100_PLL_GPU_REG		0x030
> +static struct ccu_nkmp pll_gpu_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
> +	.common		= {
> +		.reg		= 0x030,
> +		.hw.init	= CLK_HW_INIT("pll-gpu", "dcxo24M",
> +					      &ccu_nkmp_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +/*
> + * For Video PLLs, the output divider is described as "used for testing"
> + * in the user manual. So it's not modelled and forced to 0.
> + */
> +#define SUN50I_A100_PLL_VIDEO0_REG	0x040
> +static struct ccu_nm pll_video0_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.fixed_post_div	= 4,
> +	.common		= {
> +		.reg		= 0x040,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV,
> +		.hw.init	= CLK_HW_INIT("pll-video0", "dcxo24M",
> +					      &ccu_nm_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +#define SUN50I_A100_PLL_VIDEO1_REG	0x048
> +static struct ccu_nm pll_video1_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.fixed_post_div	= 4,
> +	.common		= {
> +		.reg		= 0x048,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV,
> +		.hw.init	= CLK_HW_INIT("pll-video1", "dcxo24M",
> +					      &ccu_nm_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +#define SUN50I_A100_PLL_VIDEO2_REG	0x050
> +static struct ccu_nm pll_video2_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.fixed_post_div	= 4,
> +	.common		= {
> +		.reg		= 0x050,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV,
> +		.hw.init	= CLK_HW_INIT("pll-video2", "dcxo24M",
> +					      &ccu_nm_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +#define SUN50I_A100_PLL_VE_REG		0x058
> +static struct ccu_nkmp pll_ve_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
> +	.common		= {
> +		.reg		= 0x058,
> +		.hw.init	= CLK_HW_INIT("pll-ve", "dcxo24M",
> +					      &ccu_nkmp_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +/*
> + * The COM PLL has m0 dividers in addition to the usual N, M
> + * factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz,
> + * ignore it for now.
> + */
> +#define SUN50I_A100_PLL_COM_REG		0x060
> +static struct ccu_sdm_setting pll_com_sdm_table[] = {
> +	{ .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 },
> +};
> +
> +static struct ccu_nm pll_com_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(0, 1),
> +	.sdm		= _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24),
> +					 0x160, BIT(31)),
> +	.common		= {
> +		.reg		= 0x060,
> +		.features	= CCU_FEATURE_SIGMA_DELTA_MOD,
> +		.hw.init	= CLK_HW_INIT("pll-com", "dcxo24M",
> +					      &ccu_nm_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +#define SUN50I_A100_PLL_VIDEO3_REG	0x068
> +static struct ccu_nm pll_video3_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.fixed_post_div	= 4,
> +	.common		= {
> +		.reg		= 0x068,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV,
> +		.hw.init	= CLK_HW_INIT("pll-video3", "dcxo24M",
> +					      &ccu_nm_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +/*
> + * The Audio PLL has m0, m1 dividers in addition to the usual N, M
> + * factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz,
> + * 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now.
> + * Enforce the default for them, which is m0 = 1, m1 = 0.
> + */
> +#define SUN50I_A100_PLL_AUDIO_REG		0x078
> +static struct ccu_sdm_setting pll_audio_sdm_table[] = {
> +	{ .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 },
> +	{ .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 },
> +	{ .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 },
> +	{ .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
> +};
> +
> +static struct ccu_nm pll_audio_clk = {
> +	.enable		= BIT(27),
> +	.lock		= BIT(28),
> +	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> +	.m		= _SUNXI_CCU_DIV(16, 6),
> +	.fixed_post_div	= 2,
> +	.sdm		= _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
> +					 0x178, BIT(31)),
> +	.common		= {
> +		.reg		= 0x078,
> +		.features	= CCU_FEATURE_FIXED_POSTDIV |
> +				  CCU_FEATURE_SIGMA_DELTA_MOD,
> +		.hw.init	= CLK_HW_INIT("pll-audio", "dcxo24M",
> +					      &ccu_nm_ops,
> +					      CLK_SET_RATE_UNGATE),
> +	},
> +};
> +
> +static const char * const cpux_parents[] = { "dcxo24M", "osc32k",
> +					     "iosc", "pll-cpux",
> +					      "pll-periph0" };
> +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
> +		     0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
> +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
> +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
> +
> +static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k",
> +						      "iosc", "pll-periph0",
> +						      "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
> +			     psi_ahb1_ahb2_parents,
> +			     0x510,
> +			     0, 2,	/* M */
> +			     8, 2,	/* P */
> +			     24, 3,	/* mux */
> +			     0);
> +
> +static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k",
> +						       "psi-ahb1-ahb2",
> +						       "pll-periph0",
> +						       "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
> +			     0, 2,	/* M */
> +			     8, 2,	/* P */
> +			     24, 3,	/* mux */
> +			     0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
> +			     0, 2,	/* M */
> +			     8, 2,	/* P */
> +			     24, 3,	/* mux */
> +			     0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
> +			     0, 2,	/* M */
> +			     8, 2,	/* P */
> +			     24, 3,	/* mux */
> +			     0);
> +
> +static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0",
> +					     "pll-periph0",
> +					     "pll-periph0-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
> +				 0, 3,		/* M */
> +				 24, 2,		/* mux */
> +				 BIT(31),	/* gate */
> +				 CLK_IS_CRITICAL);
> +
> +static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600,
> +				 0, 4,		/* M */
> +				 24, 1,		/* mux */
> +				 BIT(31),	/* gate */
> +				 CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
> +		      0x60c, BIT(0), 0);
> +
> +static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x",
> +					     "pll-video0-2x", "pll-video1-2x",
> +					     "pll-video2-2x"};
> +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d",
> +				 g2d_parents,
> +				 0x630,
> +				 0, 4,		/* M */
> +				 24, 3,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
> +		      0x63c, BIT(0), 0);
> +
> +static const char * const gpu_parents[] = { "pll-gpu" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
> +				       0, 2,	/* M */
> +				       24, 1,	/* mux */
> +				       BIT(31),	/* gate */
> +				       0);
> +
> +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
> +		      0x67c, BIT(0), 0);
> +
> +static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 1,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
> +		      0x68c, BIT(0), 0);
> +
> +static const char * const ve_parents[] = { "pll-ve" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
> +				 0, 3,		/* M */
> +				 24, 1,		/* mux */
> +				 BIT(31),	/* gate */
> +				 CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
> +		      0x69c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
> +		      0x70c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
> +		      0x71c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
> +		      0x72c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
> +		      0x73c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
> +		      0x78c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
> +		      0x79c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
> +		      0x804, BIT(0), 0);
> +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
> +		      0x804, BIT(1), 0);
> +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
> +		      0x804, BIT(2), 0);
> +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
> +		      0x804, BIT(5), 0);
> +static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
> +		      0x804, BIT(8), 0);
> +static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus",
> +		      0x804, BIT(9), 0);
> +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
> +		      0x804, BIT(10), 0);
> +
> +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
> +		      0x80c, BIT(0), CLK_IS_CRITICAL);
> +
> +static const char * const nand_spi_parents[] = { "dcxo24M",
> +						 "pll-periph0",
> +						 "pll-periph1",
> +						 "pll-periph0-2x",
> +						 "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
> +
> +static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x",
> +					    "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
> +					  0, 4,		/* M */
> +					  8, 2,		/* N */
> +					  24, 2,	/* mux */
> +					  BIT(31),	/* gate */
> +					  2,		/* post-div */
> +					  CLK_SET_RATE_NO_REPARENT);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
> +					  0, 4,		/* M */
> +					  8, 2,		/* N */
> +					  24, 2,	/* mux */
> +					  BIT(31),	/* gate */
> +					  2,		/* post-div */
> +					  CLK_SET_RATE_NO_REPARENT);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
> +					  0, 4,		/* M */
> +					  8, 2,		/* N */
> +					  24, 2,	/* mux */
> +					  BIT(31),	/* gate */
> +					  2,		/* post-div */
> +					  CLK_SET_RATE_NO_REPARENT);
> +
> +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
> +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
> +
> +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
> +		      BIT(31) | BIT(30), 0);
> +
> +static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
> +
> +static const char * const ir_parents[] = { "osc32k", "iosc",
> +					   "pll-periph0", "pll-periph1" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
> +
> +static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" };
> +static struct ccu_div i2s0_clk = {
> +	.enable		= BIT(31),
> +	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> +	.mux		= _SUNXI_CCU_MUX(24, 2),
> +	.common		= {
> +		.reg		= 0xa10,
> +		.hw.init	= CLK_HW_INIT_PARENTS("i2s0",
> +						      audio_parents,
> +						      &ccu_div_ops,
> +						      CLK_SET_RATE_PARENT),
> +	},
> +};
> +
> +static struct ccu_div i2s1_clk = {
> +	.enable		= BIT(31),
> +	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> +	.mux		= _SUNXI_CCU_MUX(24, 2),
> +	.common		= {
> +		.reg		= 0xa14,
> +		.hw.init	= CLK_HW_INIT_PARENTS("i2s1",
> +						      audio_parents,
> +						      &ccu_div_ops,
> +						      CLK_SET_RATE_PARENT),
> +	},
> +};
> +
> +static struct ccu_div i2s2_clk = {
> +	.enable		= BIT(31),
> +	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> +	.mux		= _SUNXI_CCU_MUX(24, 2),
> +	.common		= {
> +		.reg		= 0xa18,
> +		.hw.init	= CLK_HW_INIT_PARENTS("i2s2",
> +						      audio_parents,
> +						      &ccu_div_ops,
> +						      CLK_SET_RATE_PARENT),
> +	},
> +};
> +
> +static struct ccu_div i2s3_clk = {
> +	.enable		= BIT(31),
> +	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> +	.mux		= _SUNXI_CCU_MUX(24, 2),
> +	.common		= {
> +		.reg		= 0xa1c,
> +		.hw.init	= CLK_HW_INIT_PARENTS("i2s3",
> +						      audio_parents,
> +						      &ccu_div_ops,
> +						      CLK_SET_RATE_PARENT),
> +	},
> +};
> +
> +static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0);
> +
> +static struct ccu_div spdif_clk = {
> +	.enable		= BIT(31),
> +	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> +	.mux		= _SUNXI_CCU_MUX(24, 2),
> +	.common		= {
> +		.reg		= 0xa24,
> +		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
> +						      audio_parents,
> +						      &ccu_div_ops,
> +						      0),
> +	},
> +};
> +
> +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
> +
> +static struct ccu_div dmic_clk = {
> +	.enable		= BIT(31),
> +	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
> +	.mux		= _SUNXI_CCU_MUX(24, 2),
> +	.common		= {
> +		.reg		= 0xa40,
> +		.hw.init	= CLK_HW_INIT_PARENTS("dmic",
> +						      audio_parents,
> +						      &ccu_div_ops,
> +						      0),
> +	},
> +};
> +
> +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
> +				 audio_parents, 0xa50,
> +				 0, 4,		/* M */
> +				 24, 2,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
> +				 audio_parents, 0xa54,
> +				 0, 4,		/* M */
> +				 24, 2,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
> +				 audio_parents, 0xa58,
> +				 0, 4,		/* M */
> +				 24, 2,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
> +		      BIT(0), 0);
> +
> +/*
> + * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
> + * We will force them to 0 (12M divided from 48M).
> + */
> +#define SUN50I_A100_USB0_CLK_REG		0xa70
> +#define SUN50I_A100_USB1_CLK_REG		0xa74
> +
> +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
> +
> +static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3",
> +		      0xabc, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3",
> +		      0xacc, BIT(0), 0);
> +
> +static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x",
> +						 "pll-periph0" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi",
> +				 mipi_dsi_parents,
> +				 0xb24,
> +				 0, 4,		/* M */
> +				 24, 2,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3",
> +		      0xb4c, BIT(0), 0);
> +
> +static const char * const tcon_lcd_parents[] = { "pll-video0-4x",
> +						  "pll-video1-4x",
> +						  "pll-video2-4x",
> +						  "pll-video3-4x",
> +						  "pll-periph0-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0",
> +				  tcon_lcd_parents, 0xb60,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3",
> +		      0xb7c, BIT(0), 0);
> +
> +static const char * const ledc_parents[] = { "dcxo24M",
> +					     "pll-periph0" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc",
> +				  ledc_parents, 0xbf0,
> +				  0, 4,		/* M */
> +				  8, 2,		/* N */
> +				  24, 3,	/* mux */
> +				  BIT(31),	/* gate */
> +				  0);
> +
> +static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0);
> +
> +static const char * const csi_top_parents[] = { "pll-periph0-2x",
> +						"pll-video0-2x",
> +						"pll-video1-2x",
> +						"pll-video2-2x",
> +						"pll-video3-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top",
> +				 csi_top_parents, 0xc04,
> +				 0, 4,		/* M */
> +				 24, 3,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2",
> +						  "pll-video3", "pll-video0",
> +						  "pll-video1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk",
> +				 csi0_mclk_parents, 0xc08,
> +				 0, 5,		/* M */
> +				 24, 3,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3",
> +						  "pll-video0", "pll-video1",
> +						  "pll-video2" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk",
> +				 csi1_mclk_parents, 0xc0c,
> +				 0, 5,		/* M */
> +				 24, 3,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0);
> +
> +static const char * const csi_isp_parents[] = { "pll-periph0-2x",
> +						"pll-video0-2x",
> +						"pll-video1-2x",
> +						"pll-video2-2x",
> +						"pll-video3-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
> +				 csi_isp_parents, 0xc20,
> +				 0, 5,		/* M */
> +				 24, 3,		/* mux */
> +				 BIT(31),	/* gate */
> +				 0);
> +
> +/* Fixed factor clocks */
> +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
> +
> +static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio",
> +			   &pll_com_clk.common.hw,
> +			   5, 1, CLK_SET_RATE_PARENT);
> +
> +static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
> +			   &pll_periph0_clk.common.hw,
> +			   1, 2, 0);
> +
> +static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
> +			   &pll_periph1_clk.common.hw,
> +			   1, 2, 0);
> +
> +static const struct clk_hw *pll_video0_parents[] = {
> +	&pll_video0_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x",
> +			    pll_video0_parents,
> +			    1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x",
> +			    pll_video0_parents,
> +			    1, 2, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_video1_parents[] = {
> +	&pll_video1_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x",
> +			    pll_video1_parents,
> +			    1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x",
> +			    pll_video1_parents,
> +			    1, 2, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_video2_parents[] = {
> +	&pll_video2_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x",
> +			    pll_video2_parents,
> +			    1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x",
> +			    pll_video2_parents,
> +			    1, 2, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_video3_parents[] = {
> +	&pll_video3_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x",
> +			    pll_video3_parents,
> +			    1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x",
> +			    pll_video3_parents,
> +			    1, 2, CLK_SET_RATE_PARENT);
> +
> +static struct ccu_common *sun50i_a100_ccu_clks[] = {
> +	&pll_cpux_clk.common,
> +	&pll_ddr0_clk.common,
> +	&pll_periph0_clk.common,
> +	&pll_periph1_clk.common,
> +	&pll_gpu_clk.common,
> +	&pll_video0_clk.common,
> +	&pll_video1_clk.common,
> +	&pll_video2_clk.common,
> +	&pll_video3_clk.common,
> +	&pll_ve_clk.common,
> +	&pll_com_clk.common,
> +	&pll_audio_clk.common,
> +	&cpux_clk.common,
> +	&axi_clk.common,
> +	&cpux_apb_clk.common,
> +	&psi_ahb1_ahb2_clk.common,
> +	&ahb3_clk.common,
> +	&apb1_clk.common,
> +	&apb2_clk.common,
> +	&mbus_clk.common,
> +	&de_clk.common,
> +	&bus_de_clk.common,
> +	&g2d_clk.common,
> +	&bus_g2d_clk.common,
> +	&gpu_clk.common,
> +	&bus_gpu_clk.common,
> +	&ce_clk.common,
> +	&bus_ce_clk.common,
> +	&ve_clk.common,
> +	&bus_ve_clk.common,
> +	&bus_dma_clk.common,
> +	&bus_msgbox_clk.common,
> +	&bus_spinlock_clk.common,
> +	&bus_hstimer_clk.common,
> +	&avs_clk.common,
> +	&bus_dbg_clk.common,
> +	&bus_psi_clk.common,
> +	&bus_pwm_clk.common,
> +	&bus_iommu_clk.common,
> +	&mbus_dma_clk.common,
> +	&mbus_ve_clk.common,
> +	&mbus_ce_clk.common,
> +	&mbus_nand_clk.common,
> +	&mbus_csi_clk.common,
> +	&mbus_isp_clk.common,
> +	&mbus_g2d_clk.common,
> +	&bus_dram_clk.common,
> +	&nand0_clk.common,
> +	&nand1_clk.common,
> +	&bus_nand_clk.common,
> +	&mmc0_clk.common,
> +	&mmc1_clk.common,
> +	&mmc2_clk.common,
> +	&bus_mmc0_clk.common,
> +	&bus_mmc1_clk.common,
> +	&bus_mmc2_clk.common,
> +	&bus_uart0_clk.common,
> +	&bus_uart1_clk.common,
> +	&bus_uart2_clk.common,
> +	&bus_uart3_clk.common,
> +	&bus_uart4_clk.common,
> +	&bus_i2c0_clk.common,
> +	&bus_i2c1_clk.common,
> +	&bus_i2c2_clk.common,
> +	&bus_i2c3_clk.common,
> +	&spi0_clk.common,
> +	&spi1_clk.common,
> +	&spi2_clk.common,
> +	&bus_spi0_clk.common,
> +	&bus_spi1_clk.common,
> +	&bus_spi2_clk.common,
> +	&emac_25m_clk.common,
> +	&bus_emac_clk.common,
> +	&ir_rx_clk.common,
> +	&bus_ir_rx_clk.common,
> +	&ir_tx_clk.common,
> +	&bus_ir_tx_clk.common,
> +	&bus_gpadc_clk.common,
> +	&bus_ths_clk.common,
> +	&i2s0_clk.common,
> +	&i2s1_clk.common,
> +	&i2s2_clk.common,
> +	&i2s3_clk.common,
> +	&bus_i2s0_clk.common,
> +	&bus_i2s1_clk.common,
> +	&bus_i2s2_clk.common,
> +	&bus_i2s3_clk.common,
> +	&spdif_clk.common,
> +	&bus_spdif_clk.common,
> +	&dmic_clk.common,
> +	&bus_dmic_clk.common,
> +	&audio_codec_dac_clk.common,
> +	&audio_codec_adc_clk.common,
> +	&audio_codec_4x_clk.common,
> +	&bus_audio_codec_clk.common,
> +	&usb_ohci0_clk.common,
> +	&usb_phy0_clk.common,
> +	&usb_ohci1_clk.common,
> +	&usb_phy1_clk.common,
> +	&bus_ohci0_clk.common,
> +	&bus_ohci1_clk.common,
> +	&bus_ehci0_clk.common,
> +	&bus_ehci1_clk.common,
> +	&bus_otg_clk.common,
> +	&bus_lradc_clk.common,
> +	&bus_dpss_top0_clk.common,
> +	&bus_dpss_top1_clk.common,
> +	&mipi_dsi_clk.common,
> +	&bus_mipi_dsi_clk.common,
> +	&tcon_lcd_clk.common,
> +	&bus_tcon_lcd_clk.common,
> +	&ledc_clk.common,
> +	&bus_ledc_clk.common,
> +	&csi_top_clk.common,
> +	&csi0_mclk_clk.common,
> +	&csi1_mclk_clk.common,
> +	&bus_csi_clk.common,
> +	&csi_isp_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sun50i_a100_hw_clks = {
> +	.hws	= {
> +		[CLK_OSC12M]		= &osc12M_clk.hw,
> +		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
> +		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
> +		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
> +		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
> +		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
> +		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
> +		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
> +		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
> +		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
> +		[CLK_PLL_VIDEO0_4X]	= &pll_video0_4x_clk.hw,
> +		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
> +		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
> +		[CLK_PLL_VIDEO1_4X]	= &pll_video1_4x_clk.hw,
> +		[CLK_PLL_VIDEO2]	= &pll_video2_clk.common.hw,
> +		[CLK_PLL_VIDEO2_2X]	= &pll_video2_2x_clk.hw,
> +		[CLK_PLL_VIDEO2_4X]	= &pll_video2_4x_clk.hw,
> +		[CLK_PLL_VIDEO3]	= &pll_video3_clk.common.hw,
> +		[CLK_PLL_VIDEO3_2X]	= &pll_video3_2x_clk.hw,
> +		[CLK_PLL_VIDEO3_4X]	= &pll_video3_4x_clk.hw,
> +		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
> +		[CLK_PLL_COM]		= &pll_com_clk.common.hw,
> +		[CLK_PLL_COM_AUDIO]	= &pll_com_audio_clk.hw,
> +		[CLK_PLL_AUDIO]		= &pll_audio_clk.common.hw,
> +		[CLK_CPUX]		= &cpux_clk.common.hw,
> +		[CLK_AXI]		= &axi_clk.common.hw,
> +		[CLK_CPUX_APB]		= &cpux_apb_clk.common.hw,
> +		[CLK_PSI_AHB1_AHB2]	= &psi_ahb1_ahb2_clk.common.hw,
> +		[CLK_AHB3]		= &ahb3_clk.common.hw,
> +		[CLK_APB1]		= &apb1_clk.common.hw,
> +		[CLK_APB2]		= &apb2_clk.common.hw,
> +		[CLK_MBUS]		= &mbus_clk.common.hw,
> +		[CLK_DE]		= &de_clk.common.hw,
> +		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
> +		[CLK_G2D]		= &g2d_clk.common.hw,
> +		[CLK_BUS_G2D]		= &bus_g2d_clk.common.hw,
> +		[CLK_GPU]		= &gpu_clk.common.hw,
> +		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
> +		[CLK_CE]		= &ce_clk.common.hw,
> +		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
> +		[CLK_VE]		= &ve_clk.common.hw,
> +		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
> +		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
> +		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
> +		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
> +		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
> +		[CLK_AVS]		= &avs_clk.common.hw,
> +		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
> +		[CLK_BUS_PSI]		= &bus_psi_clk.common.hw,
> +		[CLK_BUS_PWM]		= &bus_pwm_clk.common.hw,
> +		[CLK_BUS_IOMMU]		= &bus_iommu_clk.common.hw,
> +		[CLK_MBUS_DMA]		= &mbus_dma_clk.common.hw,
> +		[CLK_MBUS_VE]		= &mbus_ve_clk.common.hw,
> +		[CLK_MBUS_CE]		= &mbus_ce_clk.common.hw,
> +		[CLK_MBUS_NAND]		= &mbus_nand_clk.common.hw,
> +		[CLK_MBUS_CSI]		= &mbus_csi_clk.common.hw,
> +		[CLK_MBUS_ISP]		= &mbus_isp_clk.common.hw,
> +		[CLK_MBUS_G2D]		= &mbus_g2d_clk.common.hw,
> +		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
> +		[CLK_NAND0]		= &nand0_clk.common.hw,
> +		[CLK_NAND1]		= &nand1_clk.common.hw,
> +		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
> +		[CLK_MMC0]		= &mmc0_clk.common.hw,
> +		[CLK_MMC1]		= &mmc1_clk.common.hw,
> +		[CLK_MMC2]		= &mmc2_clk.common.hw,
> +		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
> +		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
> +		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
> +		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
> +		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
> +		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
> +		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
> +		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
> +		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
> +		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
> +		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
> +		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
> +		[CLK_SPI0]		= &spi0_clk.common.hw,
> +		[CLK_SPI1]		= &spi1_clk.common.hw,
> +		[CLK_SPI2]		= &spi2_clk.common.hw,
> +		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
> +		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
> +		[CLK_BUS_SPI2]		= &bus_spi2_clk.common.hw,
> +		[CLK_EMAC_25M]		= &emac_25m_clk.common.hw,
> +		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
> +		[CLK_IR_RX]		= &ir_rx_clk.common.hw,
> +		[CLK_BUS_IR_RX]		= &bus_ir_rx_clk.common.hw,
> +		[CLK_IR_TX]		= &ir_tx_clk.common.hw,
> +		[CLK_BUS_IR_TX]		= &bus_ir_tx_clk.common.hw,
> +		[CLK_BUS_GPADC]		= &bus_gpadc_clk.common.hw,
> +		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
> +		[CLK_I2S0]		= &i2s0_clk.common.hw,
> +		[CLK_I2S1]		= &i2s1_clk.common.hw,
> +		[CLK_I2S2]		= &i2s2_clk.common.hw,
> +		[CLK_I2S3]		= &i2s3_clk.common.hw,
> +		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
> +		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
> +		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
> +		[CLK_BUS_I2S3]		= &bus_i2s3_clk.common.hw,
> +		[CLK_SPDIF]		= &spdif_clk.common.hw,
> +		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
> +		[CLK_DMIC]		= &dmic_clk.common.hw,
> +		[CLK_BUS_DMIC]		= &bus_dmic_clk.common.hw,
> +		[CLK_AUDIO_DAC]		= &audio_codec_dac_clk.common.hw,
> +		[CLK_AUDIO_ADC]		= &audio_codec_adc_clk.common.hw,
> +		[CLK_AUDIO_4X]		= &audio_codec_4x_clk.common.hw,
> +		[CLK_BUS_AUDIO_CODEC]	= &bus_audio_codec_clk.common.hw,
> +		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
> +		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
> +		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
> +		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
> +		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
> +		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
> +		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
> +		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
> +		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
> +		[CLK_BUS_LRADC]		= &bus_lradc_clk.common.hw,
> +		[CLK_BUS_DPSS_TOP0]	= &bus_dpss_top0_clk.common.hw,
> +		[CLK_BUS_DPSS_TOP1]	= &bus_dpss_top1_clk.common.hw,
> +		[CLK_MIPI_DSI]		= &mipi_dsi_clk.common.hw,
> +		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
> +		[CLK_TCON_LCD]		= &tcon_lcd_clk.common.hw,
> +		[CLK_BUS_TCON_LCD]	= &bus_tcon_lcd_clk.common.hw,
> +		[CLK_LEDC]		= &ledc_clk.common.hw,
> +		[CLK_BUS_LEDC]		= &bus_ledc_clk.common.hw,
> +		[CLK_CSI_TOP]		= &csi_top_clk.common.hw,
> +		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
> +		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
> +		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
> +		[CLK_CSI_ISP]		= &csi_isp_clk.common.hw,
> +	},
> +	.num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun50i_a100_ccu_resets[] = {
> +	[RST_MBUS]		= { 0x540, BIT(30) },
> +
> +	[RST_BUS_DE]		= { 0x60c, BIT(16) },
> +	[RST_BUS_G2D]		= { 0x63c, BIT(16) },
> +	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
> +	[RST_BUS_CE]		= { 0x68c, BIT(16) },
> +	[RST_BUS_VE]		= { 0x69c, BIT(16) },
> +	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
> +	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
> +	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
> +	[RST_BUS_HSTIMER]	= { 0x73c, BIT(16) },
> +	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
> +	[RST_BUS_PSI]		= { 0x79c, BIT(16) },
> +	[RST_BUS_PWM]		= { 0x7ac, BIT(16) },
> +	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
> +	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
> +	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
> +	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
> +	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
> +	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
> +	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
> +	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
> +	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
> +	[RST_BUS_UART4]		= { 0x90c, BIT(20) },
> +	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
> +	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
> +	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
> +	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
> +	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
> +	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
> +	[RST_BUS_SPI2]		= { 0x96c, BIT(18) },
> +	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
> +	[RST_BUS_IR_RX]		= { 0x99c, BIT(16) },
> +	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
> +	[RST_BUS_GPADC]		= { 0x9ec, BIT(16) },
> +	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
> +	[RST_BUS_I2S0]		= { 0xa20, BIT(16) },
> +	[RST_BUS_I2S1]		= { 0xa20, BIT(17) },
> +	[RST_BUS_I2S2]		= { 0xa20, BIT(18) },
> +	[RST_BUS_I2S3]		= { 0xa20, BIT(19) },
> +	[RST_BUS_SPDIF]		= { 0xa2c, BIT(16) },
> +	[RST_BUS_DMIC]		= { 0xa4c, BIT(16) },
> +	[RST_BUS_AUDIO_CODEC]	= { 0xa5c, BIT(16) },
> +
> +	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
> +	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
> +
> +	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
> +	[RST_BUS_OHCI1]		= { 0xa8c, BIT(17) },
> +	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
> +	[RST_BUS_EHCI1]		= { 0xa8c, BIT(21) },
> +	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
> +
> +	[RST_BUS_LRADC]		= { 0xa9c, BIT(16) },
> +	[RST_BUS_DPSS_TOP0]	= { 0xabc, BIT(16) },
> +	[RST_BUS_DPSS_TOP1]	= { 0xacc, BIT(16) },
> +	[RST_BUS_MIPI_DSI]	= { 0xb4c, BIT(16) },
> +	[RST_BUS_TCON_LCD]	= { 0xb7c, BIT(16) },
> +	[RST_BUS_LVDS]		= { 0xbac, BIT(16) },
> +	[RST_BUS_LEDC]		= { 0xbfc, BIT(16) },
> +	[RST_BUS_CSI]		= { 0xc1c, BIT(16) },
> +	[RST_BUS_CSI_ISP]	= { 0xc2c, BIT(16) },
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = {
> +	.ccu_clks	= sun50i_a100_ccu_clks,
> +	.num_ccu_clks	= ARRAY_SIZE(sun50i_a100_ccu_clks),
> +
> +	.hw_clks	= &sun50i_a100_hw_clks,
> +
> +	.resets		= sun50i_a100_ccu_resets,
> +	.num_resets	= ARRAY_SIZE(sun50i_a100_ccu_resets),
> +};
> +
> +static const u32 sun50i_a100_pll_regs[] = {
> +	SUN50I_A100_PLL_CPUX_REG,
> +	SUN50I_A100_PLL_DDR0_REG,
> +	SUN50I_A100_PLL_PERIPH0_REG,
> +	SUN50I_A100_PLL_PERIPH1_REG,
> +	SUN50I_A100_PLL_GPU_REG,
> +	SUN50I_A100_PLL_VIDEO0_REG,
> +	SUN50I_A100_PLL_VIDEO1_REG,
> +	SUN50I_A100_PLL_VIDEO2_REG,
> +	SUN50I_A100_PLL_VIDEO3_REG,
> +	SUN50I_A100_PLL_VE_REG,
> +	SUN50I_A100_PLL_COM_REG,
> +	SUN50I_A100_PLL_AUDIO_REG,
> +};
> +
> +static const u32 sun50i_a100_pll_video_regs[] = {
> +	SUN50I_A100_PLL_VIDEO0_REG,
> +	SUN50I_A100_PLL_VIDEO1_REG,
> +	SUN50I_A100_PLL_VIDEO2_REG,
> +	SUN50I_A100_PLL_VIDEO3_REG,
> +};
> +
> +static const u32 sun50i_a100_usb2_clk_regs[] = {
> +	SUN50I_A100_USB0_CLK_REG,
> +	SUN50I_A100_USB1_CLK_REG,
> +};
> +
> +static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = {
> +	.common = &pll_cpux_clk.common,
> +	/* copy from pll_cpux_clk */
> +	.enable = BIT(27),
> +	.lock   = BIT(28),
> +};
> +
> +static struct ccu_mux_nb sun50i_a100_cpu_nb = {
> +	.common         = &cpux_clk.common,
> +	.cm             = &cpux_clk.mux,
> +	.delay_us       = 1,
> +	.bypass_index   = 4, /* index of pll periph0 */
> +};
> +
> +static int sun50i_a100_ccu_probe(struct platform_device *pdev)
> +{
> +	void __iomem *reg;
> +	u32 val;
> +	int i, ret;
> +
> +	reg = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(reg))
> +		return PTR_ERR(reg);
> +
> +	/* Enable the lock bits on all PLLs */
> +	for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) {
> +		val = readl(reg + sun50i_a100_pll_regs[i]);
> +		val |= BIT(29);
> +		writel(val, reg + sun50i_a100_pll_regs[i]);
> +	}

Having a define for the BIT(29) and the enable and lock bits earlier
would be nice.

> +
> +	/*
> +	 * In order to pass the EMI certification, the SDM function of
> +	 * the peripheral 1 bus is enabled, and the frequency is still
> +	 * calculated using the previous division factor.
> +	 */
> +	writel(0xd1303333, reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG);

Ditto

> +	val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG);
> +	val |= BIT(24);
> +	writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG);

Ditto

> +	/*
> +	 * Force the output divider of video PLLs to 0.
> +	 *
> +	 * See the comment before pll-video0 definition for the reason.
> +	 */
> +	for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) {
> +		val = readl(reg + sun50i_a100_pll_video_regs[i]);
> +		val &= ~BIT(0);
> +		writel(val, reg + sun50i_a100_pll_video_regs[i]);

You get the idea :)

> diff --git a/include/dt-bindings/clock/sun50i-a100-ccu.h b/include/dt-bindings/clock/sun50i-a100-ccu.h
> new file mode 100644
> index 0000000..8cdf563
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun50i-a100-ccu.h
> @@ -0,0 +1,116 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN50I_A100_H_
> +#define _DT_BINDINGS_CLK_SUN50I_A100_H_
> +
> +#define CLK_PLL_PERIPH0		3
> +
> +#define CLK_CPUX		24
> +
> +#define CLK_APB1		29
> +
> +#define CLK_MBUS		31
> +#define CLK_DE			32
> +#define CLK_BUS_DE		33
> +#define CLK_G2D			34
> +#define CLK_BUS_G2D		35
> +#define CLK_GPU			36
> +#define CLK_BUS_GPU		37
> +#define CLK_CE			38
> +#define CLK_BUS_CE		39
> +#define CLK_VE			40
> +#define CLK_BUS_VE		41
> +#define CLK_BUS_DMA		42
> +#define CLK_BUS_MSGBOX		43
> +#define CLK_BUS_SPINLOCK	44
> +#define CLK_BUS_HSTIMER		45
> +#define CLK_AVS			46
> +#define CLK_BUS_DBG		47
> +#define CLK_BUS_PSI		48
> +#define CLK_BUS_PWM		49
> +#define CLK_BUS_IOMMU		50
> +#define CLK_MBUS_DMA		51
> +#define CLK_MBUS_VE		52
> +#define CLK_MBUS_CE		53
> +#define CLK_MBUS_NAND		54
> +#define CLK_MBUS_CSI		55
> +#define CLK_MBUS_ISP		56
> +#define CLK_MBUS_G2D		57
> +
> +#define CLK_NAND0		59
> +#define CLK_NAND1		60
> +#define CLK_BUS_NAND		61
> +#define CLK_MMC0		62
> +#define CLK_MMC1		63
> +#define CLK_MMC2		64
> +#define CLK_MMC3		65
> +#define CLK_BUS_MMC0		66
> +#define CLK_BUS_MMC1		67
> +#define CLK_BUS_MMC2		68
> +#define CLK_BUS_UART0		69
> +#define CLK_BUS_UART1		70
> +#define CLK_BUS_UART2		71
> +#define CLK_BUS_UART3		72
> +#define CLK_BUS_UART4		73
> +#define CLK_BUS_I2C0		74
> +#define CLK_BUS_I2C1		75
> +#define CLK_BUS_I2C2		76
> +#define CLK_BUS_I2C3		77
> +#define CLK_SPI0		78
> +#define CLK_SPI1		79
> +#define CLK_SPI2		80
> +#define CLK_BUS_SPI0		81
> +#define CLK_BUS_SPI1		82
> +#define CLK_BUS_SPI2		83
> +#define CLK_EMAC_25M		84
> +#define CLK_BUS_EMAC		85
> +#define CLK_IR_RX		86
> +#define CLK_BUS_IR_RX		87
> +#define CLK_IR_TX		88
> +#define CLK_BUS_IR_TX		89
> +#define CLK_BUS_GPADC		90
> +#define CLK_BUS_THS		91
> +#define CLK_I2S0		92
> +#define CLK_I2S1		93
> +#define CLK_I2S2		94
> +#define CLK_I2S3		95
> +#define CLK_BUS_I2S0		96
> +#define CLK_BUS_I2S1		97
> +#define CLK_BUS_I2S2		98
> +#define CLK_BUS_I2S3		99
> +#define CLK_SPDIF		100
> +#define CLK_BUS_SPDIF		101
> +#define CLK_DMIC		102
> +#define CLK_BUS_DMIC		103
> +#define CLK_AUDIO_DAC		104
> +#define CLK_AUDIO_ADC		105
> +#define CLK_AUDIO_4X		106
> +#define CLK_BUS_AUDIO_CODEC	107
> +#define CLK_USB_OHCI0		108
> +#define CLK_USB_PHY0		109
> +#define CLK_USB_OHCI1		110
> +#define CLK_USB_PHY1		111
> +#define CLK_BUS_OHCI0		112
> +#define CLK_BUS_OHCI1		113
> +#define CLK_BUS_EHCI0		114
> +#define CLK_BUS_EHCI1		115
> +#define CLK_BUS_OTG		116
> +#define CLK_BUS_LRADC		117
> +#define CLK_BUS_DPSS_TOP0	118
> +#define CLK_BUS_DPSS_TOP1	119
> +#define CLK_MIPI_DSI		120
> +#define CLK_BUS_MIPI_DSI	121
> +#define CLK_TCON_LCD		122
> +#define CLK_BUS_TCON_LCD	123
> +#define CLK_LEDC		124
> +#define CLK_BUS_LEDC		125
> +#define CLK_CSI_TOP		126
> +#define CLK_CSI0_MCLK		127
> +#define CLK_CSI1_MCLK		128
> +#define CLK_BUS_CSI		129
> +#define CLK_CSI_ISP		130
> +
> +#endif /* _DT_BINDINGS_CLK_SUN50I_A100_H_ */

This is hard to tell without the datasheet, but I'd rather have them
ordered by registers that functions. It's easier to debug later on, but
usually the core clocks are in lower address registers than the "leaves"
clocks, which allows to avoid most of the registration order issues.

Thanks!
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings
  2020-06-22  2:58 ` [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings Frank Lee
@ 2020-06-29 15:01   ` Maxime Ripard
  0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2020-06-29 15:01 UTC (permalink / raw)
  To: Frank Lee
  Cc: robh+dt, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage,
	devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong

[-- Attachment #1: Type: text/plain, Size: 2293 bytes --]

Hi,

On Mon, Jun 22, 2020 at 10:58:59AM +0800, Frank Lee wrote:
> Add device tree binding Documentation details for A100 pinctrl driver,
> whic has an r pin controller and a pin controller with more irq lines.
> 
> Signed-off-by: Frank Lee <frank@allwinnertech.com>
> ---
>  .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml       | 72 +++++++++++++---------
>  1 file changed, 43 insertions(+), 29 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> index bfefd09..2ac5eb5 100644
> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> @@ -48,6 +48,8 @@ properties:
>        - allwinner,sun9i-a80-r-pinctrl
>        - allwinner,sun50i-a64-pinctrl
>        - allwinner,sun50i-a64-r-pinctrl
> +      - allwinner,sun50i-a100-pinctrl
> +      - allwinner,sun50i-a100-r-pinctrl
>        - allwinner,sun50i-h5-pinctrl
>        - allwinner,sun50i-h6-pinctrl
>        - allwinner,sun50i-h6-r-pinctrl
> @@ -144,75 +146,87 @@ allOf:
>    # FIXME: We should have the pin bank supplies here, but not a lot of
>    # boards are defining it at the moment so it would generate a lot of
>    # warnings.
> -
>    - if:
>        properties:
>          compatible:
>            enum:
> -            - allwinner,sun9i-a80-pinctrl
> +            - allwinner,sun50i-a100-pinctrl
>  
>      then:
>        properties:
>          interrupts:
> -          minItems: 5
> -          maxItems: 5
> +          minItems: 7
> +          maxItems: 7
>  
>      else:
>        if:
>          properties:
>            compatible:
>              enum:
> -              - allwinner,sun6i-a31-pinctrl
> -              - allwinner,sun6i-a31s-pinctrl
> -              - allwinner,sun50i-h6-pinctrl
> +              - allwinner,sun9i-a80-pinctrl

The diff is a bit of a mess here. I guess you just added a new if with
the A100 pinctrl compatible?

Also, since it's a new SoC and we don't really have to care about the
existing DT for boards, it would be great if you could make the gpio
banks supplies required.

Thanks!
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH v2 06/11] nvmem: sunxi-sid: add support for A100's SID controller
  2020-06-22  2:59 ` [PATCH v2 06/11] nvmem: sunxi-sid: add support " Frank Lee
@ 2020-06-29 15:07   ` Maxime Ripard
  0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2020-06-29 15:07 UTC (permalink / raw)
  To: Frank Lee
  Cc: robh+dt, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage,
	devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong

[-- Attachment #1: Type: text/plain, Size: 791 bytes --]

On Mon, Jun 22, 2020 at 10:59:02AM +0800, Frank Lee wrote:
> Add support for A100's SID controller.
> 
> Signed-off-by: Frank Lee <frank@allwinnertech.com>
> ---
>  drivers/nvmem/sunxi_sid.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
> index e26ef1b..8ac074b 100644
> --- a/drivers/nvmem/sunxi_sid.c
> +++ b/drivers/nvmem/sunxi_sid.c
> @@ -189,6 +189,11 @@ static int sunxi_sid_probe(struct platform_device *pdev)
>  	.need_register_readout = true,
>  };
>  
> +static const struct sunxi_sid_cfg sun50i_a100_cfg = {
> +	.value_offset = 0x200,
> +	.size = 0x100,
> +};
> +

It looks like it's the same tha nthe H3 / A64 then?

If so, you can just reuse their compatible as fallback

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support
  2020-06-22  2:59 ` [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support Frank Lee
@ 2020-06-29 15:10   ` Maxime Ripard
  0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2020-06-29 15:10 UTC (permalink / raw)
  To: Frank Lee
  Cc: robh+dt, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage,
	devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong

[-- Attachment #1: Type: text/plain, Size: 556 bytes --]

On Mon, Jun 22, 2020 at 10:59:04AM +0800, Frank Lee wrote:
> This patch add thermal sensor controller support for A100,
> which is similar to the previous ones.
> 
> Signed-off-by: Frank Lee <frank@allwinnertech.com>
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>

This SoB is weird. If Yangtao Li is the author, then they should be
credited, and if they're not then their SoB shouldn't be here
(especially in the latest position which is usually the person that
committed / sent the patch).

Either way, something is off here.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
  2020-06-22  2:59 ` [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Frank Lee
@ 2020-06-29 15:21   ` Maxime Ripard
  0 siblings, 0 replies; 17+ messages in thread
From: Maxime Ripard @ 2020-06-29 15:21 UTC (permalink / raw)
  To: Frank Lee
  Cc: robh+dt, wens, mturquette, sboyd, srinivas.kandagatla,
	linus.walleij, anarsoul, tiny.windzz, rui.zhang, daniel.lezcano,
	amit.kucheria, p.zabel, clabbe, icenowy, megous, karlp, bage,
	devicetree, linux-arm-kernel, linux-kernel, linux-clk,
	linux-gpio, linux-pm, huangshuosheng, liyong

[-- Attachment #1: Type: text/plain, Size: 4739 bytes --]

Hi,

On Mon, Jun 22, 2020 at 10:59:05AM +0800, Frank Lee wrote:
> Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds
> the basical DTSI file of it, including the clock, i2c, pins, sid, ths,
> and UART support.
> 
> Signed-off-by: Frank Lee <frank@allwinnertech.com>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 337 +++++++++++++++++++++++++
>  1 file changed, 337 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> new file mode 100644
> index 0000000..5133897
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -0,0 +1,337 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun50i-a100-ccu.h>
> +#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
> +#include <dt-bindings/reset/sun50i-a100-ccu.h>
> +#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,armv8";
> +			device_type = "cpu";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu@1 {
> +			compatible = "arm,armv8";
> +			device_type = "cpu";
> +			reg = <0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu@2 {
> +			compatible = "arm,armv8";
> +			device_type = "cpu";
> +			reg = <0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu@3 {
> +			compatible = "arm,armv8";
> +			device_type = "cpu";
> +			reg = <0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	iosc: internal-osc-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <16000000>;
> +		clock-accuracy = <300000000>;
> +		clock-output-names = "iosc";
> +		#clock-cells = <0>;
> +	};
> +
> +	dcxo24M: dcxo24M_clk {

You shouldn't have underscores in the node names.

> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "dcxo24M";
> +		#clock-cells = <0>;
> +	};
> +
> +	osc32k: osc32k_clk {

Same thing here

Also, ordering by node name here would be nice

> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		clock-output-names = "osc32k";
> +		#clock-cells = <0>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +	};

Does it suffer from the same time instability than the one in the A64?
If so, you probably want to enable the workaround too.

> +	soc: soc {

Do you really need a label for that node?

> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;

Why do you need cells with 2 items here? You don't seem to be using
them.

> +		r_i2c0: i2c@7081400 {
> +			compatible = "allwinner,sun6i-a31-i2c";
> +			reg = <0x0 0x07081400 0x0 0x400>;
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_I2C0>;
> +			resets = <&ccu RST_BUS_I2C0>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&r_i2c0_pins>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		r_i2c1: i2c@7081800 {
> +			compatible = "allwinner,sun6i-a31-i2c";
> +			reg = <0x0 0x07081800 0x0 0x400>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_I2C1>;
> +			resets = <&ccu RST_BUS_I2C1>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&r_i2c1_pins>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +	};

The clocks and resets phandles and IDs don't look right

> +	thermal-zones {
> +		cpu_thermal_zone {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&ths 0>;
> +		};

Please add a new line here

> +		gpu_thermal_zone{

You should have a space here    ^ 

> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&ths 1>;
> +		};

newline

> +		ddr_thermal_zone{

space                           ^ 

Thanks!
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2020-06-29 21:23 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
2020-06-22  2:58 ` [PATCH v2 01/11] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU Frank Lee
2020-06-22  2:58 ` [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU Frank Lee
2020-06-29 14:58   ` Maxime Ripard
2020-06-22  2:58 ` [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings Frank Lee
2020-06-29 15:01   ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 04/11] pinctrl: sunxi: add support for the Allwinner A100 pin controller Frank Lee
2020-06-22  2:59 ` [PATCH v2 05/11] dt-bindings: nvmem: SID: add binding for A100's SID controller Frank Lee
2020-06-22  2:59 ` [PATCH v2 06/11] nvmem: sunxi-sid: add support " Frank Lee
2020-06-29 15:07   ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 07/11] dt-bindings: thermal: sun8i: Add binding for A100's THS controller Frank Lee
2020-06-22  2:59 ` [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support Frank Lee
2020-06-29 15:10   ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Frank Lee
2020-06-29 15:21   ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 10/11] dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings Frank Lee
2020-06-22  2:59 ` [PATCH v2 11/11] arm64: allwinner: A100: add support for Allwinner Perf1 board Frank Lee

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).