Hi,

On Tue, Jul 28, 2020 at 09:11:11AM -0500, Dan Murphy wrote:
> Add the Texas Instruments BQ27561 battery monitor.  The register address
> map is laid out the same as compared to other devices within the file.
> The battery status register has differing bits to determine if the
> battery is full, discharging or dead.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  drivers/power/supply/bq27xxx_battery.c     | 68 +++++++++++++++++++++-
>  drivers/power/supply/bq27xxx_battery_i2c.c |  2 +
>  include/linux/power/bq27xxx_battery.h      |  1 +
>  3 files changed, 70 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> index 942c92127b6d..654d38bcd7e0 100644
> --- a/drivers/power/supply/bq27xxx_battery.c
> +++ b/drivers/power/supply/bq27xxx_battery.c
> @@ -43,6 +43,7 @@
>   * http://www.ti.com/product/bq27411-g1
>   * http://www.ti.com/product/bq27441-g1
>   * http://www.ti.com/product/bq27621-g1
> + * https://www.ti.com/lit/gpn/bq27z561

Applying this failed, because I applied a patch converting the
http urls to https. I would have fixed this silently, but it made
me notice the chip name is bq27z561 instead of simply bq27561.

You named it without the 'z' everywhere, is there a reason?
Searching for bq27561 basically only finds your patches and
you decided not to drop the z for the bq28z610.

-- Sebastian