Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] drivers: power: axp20x-battery: support setting charge_full_design
@ 2020-07-29 10:49 Jack Mitchell
  0 siblings, 0 replies; only message in thread
From: Jack Mitchell @ 2020-07-29 10:49 UTC (permalink / raw)
  To: linux-pm
  Cc: Sebastian Reichel, Chen-Yu Tsai, linux-kernel, Quentin Schulz,
	Jack Mitchell

Signed-off-by: Jack Mitchell <ml@embed.me.uk>
---
 drivers/power/supply/axp20x_battery.c | 39 +++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index fe96f77bffa7..8ce4ebe7ccd5 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -60,6 +60,7 @@
 
 #define AXP20X_V_OFF_MASK		GENMASK(2, 0)
 
+#define AXP20X_BAT_MAX_CAP_VALID	BIT(7)
 
 struct axp20x_batt_ps;
 
@@ -86,6 +87,7 @@ struct axp20x_batt_ps {
 	struct axp20x_thermal_sensor sensor;
 	/* Maximum constant charge current */
 	unsigned int max_ccc;
+	unsigned int charge_full_design;
 	const struct axp_data	*data;
 };
 
@@ -260,6 +262,10 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
 		val->intval = POWER_SUPPLY_HEALTH_GOOD;
 		break;
 
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = axp20x_batt->charge_full_design;
+		break;
+
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 		ret = axp20x_get_constant_charge_current(axp20x_batt,
 							 &val->intval);
@@ -401,6 +407,30 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
 				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
 }
 
+static int axp20x_set_charge_full_design(struct axp20x_batt_ps *axp_batt,
+					      int charge_full_uah)
+{
+	/* (Unit: 1.456mAh) */
+	int max_capacity_units = charge_full_uah / 1456;
+	int ret;
+
+	u8 max_capacity_msb = (max_capacity_units & 0x7F00) >> 8;
+	u8 max_capacity_lsb = (max_capacity_units & 0xFF);
+
+	axp_batt->charge_full_design = max_capacity_units * 1456;
+
+	max_capacity_msb |= AXP20X_BAT_MAX_CAP_VALID;
+
+	ret = regmap_write(axp_batt->regmap, AXP288_FG_DES_CAP0_REG,
+			   max_capacity_lsb);
+
+	if (ret)
+		return ret;
+
+	return regmap_write(axp_batt->regmap, AXP288_FG_DES_CAP1_REG,
+			    max_capacity_msb);
+}
+
 static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
 					      int charge_current)
 {
@@ -492,6 +522,7 @@ static enum power_supply_property axp20x_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 	POWER_SUPPLY_PROP_HEALTH,
@@ -675,6 +706,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
 	if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
 		int vmin = info.voltage_min_design_uv;
 		int ccc = info.constant_charge_current_max_ua;
+		int cfd = info.charge_full_design_uah;
 
 		if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
 							      vmin))
@@ -692,6 +724,13 @@ static int axp20x_power_probe(struct platform_device *pdev)
 			axp20x_batt->max_ccc = ccc;
 			axp20x_set_constant_charge_current(axp20x_batt, ccc);
 		}
+
+		if (cfd > 0 && axp20x_set_charge_full_design(axp20x_batt,
+							       cfd)) {
+			dev_err(&pdev->dev,
+				"couldn't set charge_full_design\n");
+			axp20x_batt->charge_full_design = 0;
+		}
 	}
 
 	error = axp20x_thermal_register_sensor(pdev, axp20x_batt);
-- 
2.28.0


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-29 10:49 [PATCH] drivers: power: axp20x-battery: support setting charge_full_design Jack Mitchell

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git