Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: robh+dt@kernel.org, georgi.djakov@linaro.org
Cc: bjorn.andersson@linaro.org, agross@kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, jonathan@marek.ca,
	linux-pm@vger.kernel.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 5/7] interconnect: qcom: Add EPSS L3 support on SM8250
Date: Sat,  1 Aug 2020 18:00:47 +0530
Message-ID: <20200801123049.32398-6-sibis@codeaurora.org> (raw)
In-Reply-To: <20200801123049.32398-1-sibis@codeaurora.org>

Add Epoch Subsystem (EPSS) L3 interconnect provider support on
SM8250 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/interconnect/qcom/osm-l3.c | 23 +++++++++++++++++++++++
 drivers/interconnect/qcom/sm8250.h |  2 ++
 2 files changed, 25 insertions(+)

diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 27c9ece52efda..cbf4ef04491df 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -17,6 +17,7 @@
 #include "sc7180.h"
 #include "sdm845.h"
 #include "sm8150.h"
+#include "sm8250.h"
 
 #define LUT_MAX_ENTRIES			40U
 #define LUT_SRC				GENMASK(31, 30)
@@ -29,6 +30,11 @@
 #define OSM_REG_FREQ_LUT		0x110
 #define OSM_REG_PERF_STATE		0x920
 
+/* EPSS Register offsets */
+#define EPSS_LUT_ROW_SIZE		4
+#define EPSS_REG_FREQ_LUT		0x100
+#define EPSS_REG_PERF_STATE		0x320
+
 #define OSM_L3_MAX_LINKS		1
 
 #define to_qcom_provider(_provider) \
@@ -123,6 +129,22 @@ static const struct qcom_icc_desc sm8150_icc_osm_l3 = {
 	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
+DEFINE_QNODE(sm8250_epss_apps_l3, SM8250_MASTER_EPSS_L3_APPS, 32, SM8250_SLAVE_EPSS_L3);
+DEFINE_QNODE(sm8250_epss_l3, SM8250_SLAVE_EPSS_L3, 32);
+
+static struct qcom_icc_node *sm8250_epss_l3_nodes[] = {
+	[MASTER_EPSS_L3_APPS] = &sm8250_epss_apps_l3,
+	[SLAVE_EPSS_L3_SHARED] = &sm8250_epss_l3,
+};
+
+static const struct qcom_icc_desc sm8250_icc_epss_l3 = {
+	.nodes = sm8250_epss_l3_nodes,
+	.num_nodes = ARRAY_SIZE(sm8250_epss_l3_nodes),
+	.lut_row_size = EPSS_LUT_ROW_SIZE,
+	.reg_freq_lut = EPSS_REG_FREQ_LUT,
+	.reg_perf_state = EPSS_REG_PERF_STATE,
+};
+
 static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 {
 	struct qcom_osm_l3_icc_provider *qp;
@@ -288,6 +310,7 @@ static const struct of_device_id osm_l3_of_match[] = {
 	{ .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 },
 	{ .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 },
 	{ .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 },
+	{ .compatible = "qcom,sm8250-epss-l3", .data = &sm8250_icc_epss_l3 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, osm_l3_of_match);
diff --git a/drivers/interconnect/qcom/sm8250.h b/drivers/interconnect/qcom/sm8250.h
index 7eb6c709c30d1..b31fb431a20fc 100644
--- a/drivers/interconnect/qcom/sm8250.h
+++ b/drivers/interconnect/qcom/sm8250.h
@@ -158,5 +158,7 @@
 #define SM8250_SLAVE_VSENSE_CTRL_CFG		147
 #define SM8250_SNOC_CNOC_MAS			148
 #define SM8250_SNOC_CNOC_SLV			149
+#define SM8250_MASTER_EPSS_L3_APPS		150
+#define SM8250_SLAVE_EPSS_L3			151
 
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-01 12:30 [PATCH 0/7] Add L3 provider support for SM8150/SM8250 Sibi Sankar
2020-08-01 12:30 ` [PATCH 1/7] dt-bindings: interconnect: Add OSM L3 DT binding on SM8150 Sibi Sankar
2020-08-01 12:30 ` [PATCH 2/7] interconnect: qcom: Add OSM L3 support " Sibi Sankar
2020-08-01 12:30 ` [PATCH 3/7] interconnect: qcom: Lay the groundwork for adding EPSS support Sibi Sankar
2020-08-01 12:30 ` [PATCH 4/7] dt-bindings: interconnect: Add EPSS L3 DT binding on SM8250 Sibi Sankar
2020-08-01 12:30 ` Sibi Sankar [this message]
2020-08-01 12:30 ` [PATCH 6/7] arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider Sibi Sankar
2020-08-01 12:30 ` [PATCH 7/7] arm64: dts: qcom: sm8250: Add EPSS " Sibi Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200801123049.32398-6-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=georgi.djakov@linaro.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git