linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Kevin Hilman <khilman@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>, Nishanth Menon <nm@ti.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Niklas Cassel <nks@flawful.org>
Subject: Re: [RFC PATCH 2/3] opp: Set required OPPs in reverse order when scaling down
Date: Fri, 21 Aug 2020 18:31:52 +0200	[thread overview]
Message-ID: <20200821163152.GA3422@gerhold.net> (raw)
In-Reply-To: <20200730080146.25185-3-stephan@gerhold.net>

Hi Viresh,

On Thu, Jul 30, 2020 at 10:01:45AM +0200, Stephan Gerhold wrote:
> The OPP core already has well-defined semantics to ensure required
> OPPs/regulators are set before/after the frequency change, depending
> on if we scale up or down.
> 
> Similar requirements might exist for the order of required OPPs
> when multiple power domains need to be scaled for a frequency change.
> 
> For example, on Qualcomm platforms using CPR (Core Power Reduction),
> we need to scale the VDDMX and CPR power domain. When scaling up,
> MX should be scaled up before CPR. When scaling down, CPR should be
> scaled down before MX.
> 
> In general, if there are multiple "required-opps" in the device tree
> I would expect that the order is either irrelevant, or there is some
> dependency between the power domains. In that case, the power domains
> should be scaled down in reverse order.
> 
> This commit updates _set_required_opps() to set required OPPs in
> reverse order when scaling down.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

This patch does not apply anymore after the cleanup you pushed to
opp/linux-next. I would be happy to send a v2 with that fixed.

On my other OPP patch set you mentioned that you might apply these
directly with some of your own changes - would you also prefer to do it
yourself in this case or should I send a v2?

Still looking for your feedback on both patch sets by the way! :)

Thanks!
Stephan

> ---
> Related discussion: https://lore.kernel.org/linux-arm-msm/20200525194443.GA11851@flawful.org/
> 
> The advantage of this approach is that the CPR driver does not need
> to bother with the VDDMX power domain at all - the requirements
> can be fully described within the device tree, see e.g. [1].
> An alternative option would be to modify the CPR driver to make these votes.
> 
> [1]: https://lore.kernel.org/linux-arm-msm/20200507104603.GA581328@gerhold.net/2-msm8916-vdd-mx.patch
> ---
>  drivers/opp/core.c | 30 +++++++++++++++++++++---------
>  1 file changed, 21 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> index f7a476b55069..f93f551c911e 100644
> --- a/drivers/opp/core.c
> +++ b/drivers/opp/core.c
> @@ -799,7 +799,7 @@ static int _set_required_opp(struct device *dev, struct device *pd_dev,
>  /* This is only called for PM domain for now */
>  static int _set_required_opps(struct device *dev,
>  			      struct opp_table *opp_table,
> -			      struct dev_pm_opp *opp)
> +			      struct dev_pm_opp *opp, bool up)
>  {
>  	struct opp_table **required_opp_tables = opp_table->required_opp_tables;
>  	struct device **genpd_virt_devs = opp_table->genpd_virt_devs;
> @@ -821,12 +821,24 @@ static int _set_required_opps(struct device *dev,
>  	 */
>  	mutex_lock(&opp_table->genpd_virt_dev_lock);
>  
> -	for (i = 0; i < opp_table->required_opp_count; i++) {
> -		pd_dev = genpd_virt_devs[i];
> +	if (up) {
> +		/* Scaling up? Set required OPPs in normal order */
> +		for (i = 0; i < opp_table->required_opp_count; i++) {
> +			pd_dev = genpd_virt_devs[i];
>  
> -		ret = _set_required_opp(dev, pd_dev, opp, i);
> -		if (ret)
> -			break;
> +			ret = _set_required_opp(dev, pd_dev, opp, i);
> +			if (ret)
> +				break;
> +		}
> +	} else {
> +		/* Scaling down? Set required OPPs in reverse order */
> +		for (i = opp_table->required_opp_count - 1; i >= 0; i--) {
> +			pd_dev = genpd_virt_devs[i];
> +
> +			ret = _set_required_opp(dev, pd_dev, opp, i);
> +			if (ret)
> +				break;
> +		}
>  	}
>  	mutex_unlock(&opp_table->genpd_virt_dev_lock);
>  
> @@ -914,7 +926,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
>  			opp_table->regulator_enabled = false;
>  		}
>  
> -		ret = _set_required_opps(dev, opp_table, NULL);
> +		ret = _set_required_opps(dev, opp_table, NULL, false);
>  		goto put_opp_table;
>  	}
>  
> @@ -973,7 +985,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
>  
>  	/* Scaling up? Configure required OPPs before frequency */
>  	if (freq >= old_freq) {
> -		ret = _set_required_opps(dev, opp_table, opp);
> +		ret = _set_required_opps(dev, opp_table, opp, true);
>  		if (ret)
>  			goto put_opp;
>  	}
> @@ -993,7 +1005,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
>  
>  	/* Scaling down? Configure required OPPs after frequency */
>  	if (!ret && freq < old_freq) {
> -		ret = _set_required_opps(dev, opp_table, opp);
> +		ret = _set_required_opps(dev, opp_table, opp, false);
>  		if (ret)
>  			dev_err(dev, "Failed to set required opps: %d\n", ret);
>  	}
> -- 
> 2.27.0
> 

  reply	other threads:[~2020-08-21 16:32 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30  8:01 [RFC PATCH 0/3] opp: required_opps: Power on genpd, scale down in reverse order Stephan Gerhold
2020-07-30  8:01 ` [RFC PATCH 1/3] opp: Reduce code duplication in _set_required_opps() Stephan Gerhold
2020-08-24 11:18   ` Viresh Kumar
2020-08-24 11:30     ` Stephan Gerhold
2020-08-24 12:10       ` Viresh Kumar
2020-08-24 12:23         ` Stephan Gerhold
2020-07-30  8:01 ` [RFC PATCH 2/3] opp: Set required OPPs in reverse order when scaling down Stephan Gerhold
2020-08-21 16:31   ` Stephan Gerhold [this message]
2020-08-24 11:30     ` Viresh Kumar
2020-08-24 11:42       ` Stephan Gerhold
2020-07-30  8:01 ` [RFC PATCH 3/3] opp: Power on (virtual) power domains managed by the OPP core Stephan Gerhold
2020-08-24 11:27   ` Viresh Kumar
2020-08-24 11:55     ` Stephan Gerhold
2020-08-24 14:36       ` Ulf Hansson
2020-08-24 15:08         ` Stephan Gerhold
2020-08-25  4:43           ` Viresh Kumar
2020-08-25  6:43             ` Ulf Hansson
2020-08-25  7:33               ` Stephan Gerhold
2020-08-25 12:42                 ` Ulf Hansson
2020-08-26  8:31                   ` Stephan Gerhold
2020-08-12  8:53 ` [RFC PATCH 0/3] opp: required_opps: Power on genpd, scale down in reverse order Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200821163152.GA3422@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=khilman@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nks@flawful.org \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=sboyd@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).