Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: rafael@kernel.org, robh@kernel.org,
	"open list:POWER MANAGEMENT CORE" <linux-pm@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH V2 1/4] powercap/drivers/idle_inject: Specify idle state max latency
Date: Fri, 03 Apr 2020 11:38:22 +0200
Message-ID: <2577452.sm1PKieV59@kreacher> (raw)
In-Reply-To: <20200329220324.8785-1-daniel.lezcano@linaro.org>

On Monday, March 30, 2020 12:03:17 AM CEST Daniel Lezcano wrote:
> Currently the idle injection framework uses the play_idle() function
> which puts the current CPU in an idle state. The idle state is the
> deepest one, as specified by the latency constraint when calling the
> subsequent play_idle_precise() function with the INT_MAX.
> 
> The idle_injection is used by the cpuidle_cooling device which
> computes the idle / run duration to mitigate the temperature by
> injecting idle cycles. The cooling device has no control on the depth
> of the idle state.
> 
> Allow finer control of the idle injection mechanism by allowing to
> specify the latency for the idle state. Thus the cooling device has
> the ability to have a guarantee on the exit latency of the idle states
> it is injecting.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

And I'm assuming that you will take care of the series yourself.

> ---
>   - V2:
>     - Remove the get_latency helper
> 
> ---
>  drivers/powercap/idle_inject.c | 16 +++++++++++++++-
>  include/linux/idle_inject.h    |  4 ++++
>  2 files changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/powercap/idle_inject.c b/drivers/powercap/idle_inject.c
> index cd1270614cc6..49f42c475620 100644
> --- a/drivers/powercap/idle_inject.c
> +++ b/drivers/powercap/idle_inject.c
> @@ -61,12 +61,14 @@ struct idle_inject_thread {
>   * @timer: idle injection period timer
>   * @idle_duration_us: duration of CPU idle time to inject
>   * @run_duration_us: duration of CPU run time to allow
> + * @latency_us: max allowed latency
>   * @cpumask: mask of CPUs affected by idle injection
>   */
>  struct idle_inject_device {
>  	struct hrtimer timer;
>  	unsigned int idle_duration_us;
>  	unsigned int run_duration_us;
> +	unsigned int latency_us;
>  	unsigned long int cpumask[0];
>  };
>  
> @@ -138,7 +140,8 @@ static void idle_inject_fn(unsigned int cpu)
>  	 */
>  	iit->should_run = 0;
>  
> -	play_idle(READ_ONCE(ii_dev->idle_duration_us));
> +	play_idle_precise(READ_ONCE(ii_dev->idle_duration_us) * NSEC_PER_USEC,
> +			  READ_ONCE(ii_dev->latency_us) * NSEC_PER_USEC);
>  }
>  
>  /**
> @@ -169,6 +172,16 @@ void idle_inject_get_duration(struct idle_inject_device *ii_dev,
>  	*idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
>  }
>  
> +/**
> + * idle_inject_set_latency - set the maximum latency allowed
> + * @latency_us: set the latency requirement for the idle state
> + */
> +void idle_inject_set_latency(struct idle_inject_device *ii_dev,
> +			     unsigned int latency_us)
> +{
> +	WRITE_ONCE(ii_dev->latency_us, latency_us);
> +}
> +
>  /**
>   * idle_inject_start - start idle injections
>   * @ii_dev: idle injection control device structure
> @@ -297,6 +310,7 @@ struct idle_inject_device *idle_inject_register(struct cpumask *cpumask)
>  	cpumask_copy(to_cpumask(ii_dev->cpumask), cpumask);
>  	hrtimer_init(&ii_dev->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
>  	ii_dev->timer.function = idle_inject_timer_fn;
> +	ii_dev->latency_us = UINT_MAX;
>  
>  	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) {
>  
> diff --git a/include/linux/idle_inject.h b/include/linux/idle_inject.h
> index a445cd1a36c5..91a8612b8bf9 100644
> --- a/include/linux/idle_inject.h
> +++ b/include/linux/idle_inject.h
> @@ -26,4 +26,8 @@ void idle_inject_set_duration(struct idle_inject_device *ii_dev,
>  void idle_inject_get_duration(struct idle_inject_device *ii_dev,
>  				 unsigned int *run_duration_us,
>  				 unsigned int *idle_duration_us);
> +
> +void idle_inject_set_latency(struct idle_inject_device *ii_dev,
> +			     unsigned int latency_ns);
> +
>  #endif /* __IDLE_INJECT_H__ */
> 





  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-29 22:03 Daniel Lezcano
2020-03-29 22:03 ` [PATCH 2/4] dt-bindings: thermal: Add the idle cooling device Daniel Lezcano
2020-04-07 13:36   ` Daniel Lezcano
2020-04-07 14:09   ` Amit Kucheria
2020-04-10 16:59   ` Rob Herring
2020-04-12 18:08     ` Daniel Lezcano
2020-03-29 22:03 ` [PATCH 3/4] thermal/drivers/cpuidle_cooling: Change the registration function Daniel Lezcano
2020-03-30  9:58   ` Viresh Kumar
2020-03-29 22:03 ` [PATCH 4/4] thermal: cpuidle: Register cpuidle cooling device Daniel Lezcano
2020-04-03  9:38 ` Rafael J. Wysocki [this message]
2020-04-03 11:09   ` [PATCH V2 1/4] powercap/drivers/idle_inject: Specify idle state max latency Daniel Lezcano
2020-04-14 16:26 [PATCH v2 " Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2577452.sm1PKieV59@kreacher \
    --to=rjw@rjwysocki.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git