Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Chris Healy <cphealy@gmail.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Angus Ainslie <angus@akkea.ca>,
	linux-imx@nxp.com, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support
Date: Fri, 06 Dec 2019 12:46:59 +0100
Message-ID: <27b7642917479f9c17af30054abe1a72d0b121f7.camel@pengutronix.de> (raw)
In-Reply-To: <20190912012920.29601-1-andrew.smirnov@gmail.com>

Hi all,

can this series be considered for mainline inclusion? It has been
tested and works well in our i.MX8M kernel setup.

Regards,
Lucas

On Mi, 2019-09-11 at 18:29 -0700, Andrey Smirnov wrote:
> Everyone:
> 
> This series contains patches adding support for HWMON integration, bug
> fixes and general improvements (hopefully) for TMU driver I made while
> working on it on i.MX8MQ.
> 
> Feedback is welcome!
> 
> Thanks,
> Andrey Smirnov
> 
> Changes since [v6]:
> 
>    - Rebased on top of Zhang's "next" branch
> 
>    - Added "thermal: qoriq: Drop unnecessary drvdata cleanup"
> 
> Changes since [v5]
> 
>     - Rebased on recent linux-next, dropped "thermal: qoriq: Remove
>       unnecessary DT node is NULL check" since it is already in the
>       tree
> 
>     - Dropped dependency on [rfc]
> 
> Changes since [v4]
> 
>     - Collected Tested-by from Lucas
>     
>     - Collected Reviewed-by from Daniel
> 
>     - Converted "thermal: qoriq: Enable all sensors before registering
>       them" to use if instead of switch statement for error checking
> 
> Changes since [v3]
> 
>     - Series reabse on top of [rfc]
>     
>     - Fixed incorrect goto label in "thermal: qoriq: Pass data to
>       qoriq_tmu_calibration()"
>       
>     - Added REGS_TRITSR() register description to "thermal: qoriq: Do
>       not report invalid temperature reading"
>       
>     - Reworded commit message of "thermal: qoriq: Remove unnecessary
>       DT node is NULL check"
> 
> Changes since [v2]
> 
>     - Patches rebased on v5.1-rc1
> 
> Changes since [v1]
> 
>     - Rebased on "linus" branch of
>       git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
>       that included latest chagnes adding multi-sensors support
> 
>     - Dropped
> 
> 	thermal: qoriq: Add support for multiple thremal sites
> 	thermal: qoriq: Be more strict when parsing
> 	thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
> 
>       since they are no longer relevant
> 
>     - Added
> 
> 	thermal: qoriq: Don't store struct thermal_zone_device reference
> 	thermal: qoriq: Add local struct qoriq_sensor pointer
> 	thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
> 	thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
> 
>       to simplify latest codebase
> 
>     - Changed "thermal: qoriq: Do not report invalid temperature
>       reading" to use regmap_read_poll_timeout() to make sure that
>       tmu_get_temp() waits for fist sample to be ready before
>       reporting it. This case is triggered on my setup if
>       qoriq_thermal is compiled as a module
> 
> [v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@gmail.com
> [v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com
> [v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@gmail.com
> [v4] lore.kernel.org/lkml/20190413082748.29990-1-andrew.smirnov@gmail.com
> [v5] lore.kernel.org/lkml/20190424064830.18179-1-andrew.smirnov@gmail.com
> [v6] lore.kernel.org/lkml/20190821012612.7823-1-andrew.smirnov@gmail.com
> [rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@linaro.org
> 
> Andrey Smirnov (12):
>   thermal: qoriq: Add local struct device pointer
>   thermal: qoriq: Don't store struct thermal_zone_device reference
>   thermal: qoriq: Add local struct qoriq_sensor pointer
>   thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
>   thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
>   thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
>   thermal: qoriq: Drop unnecessary drvdata cleanup
>   thermal: qoriq: Convert driver to use regmap API
>   thermal: qoriq: Enable all sensors before registering them
>   thermal: qoriq: Do not report invalid temperature reading
>   thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
>   thermal: qoriq: Add hwmon support
> 
>  drivers/thermal/qoriq_thermal.c | 252 +++++++++++++++++---------------
>  drivers/thermal/thermal_hwmon.c |  28 ++++
>  drivers/thermal/thermal_hwmon.h |   7 +
>  3 files changed, 167 insertions(+), 120 deletions(-)
> 


  parent reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-12  1:29 Andrey Smirnov
2019-09-12  1:29 ` [PATCH v7 01/12] thermal: qoriq: Add local struct device pointer Andrey Smirnov
2019-09-12  1:29 ` [PATCH v7 02/12] thermal: qoriq: Don't store struct thermal_zone_device reference Andrey Smirnov
2019-09-12  1:29 ` [PATCH v7 03/12] thermal: qoriq: Add local struct qoriq_sensor pointer Andrey Smirnov
2019-09-12  1:29 ` [PATCH v7 04/12] thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data Andrey Smirnov
2019-09-12  1:29 ` [PATCH v7 05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly Andrey Smirnov
2019-09-12  1:29 ` [PATCH v7 06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly Andrey Smirnov
2019-09-12  1:34 ` [PATCH v7 07/12] thermal: qoriq: Drop unnecessary drvdata cleanup Andrey Smirnov
2019-09-12  1:34   ` [PATCH v7 08/12] thermal: qoriq: Convert driver to use regmap API Andrey Smirnov
2019-09-12  1:34   ` [PATCH v7 09/12] thermal: qoriq: Enable all sensors before registering them Andrey Smirnov
2019-09-12  1:34   ` [PATCH v7 10/12] thermal: qoriq: Do not report invalid temperature reading Andrey Smirnov
2019-09-12  1:34   ` [PATCH v7 11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() Andrey Smirnov
2019-09-12  1:34   ` [PATCH v7 12/12] thermal: qoriq: Add hwmon support Andrey Smirnov
2019-12-06 11:46 ` Lucas Stach [this message]
2019-12-06 12:01   ` [PATCH v7 00/12] QorIQ TMU multi-sensor and HWMON support Daniel Lezcano
2019-12-09 18:20   ` Daniel Lezcano
2019-12-09 18:49     ` Andrey Smirnov
2019-12-09 18:54       ` Daniel Lezcano

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=27b7642917479f9c17af30054abe1a72d0b121f7.camel@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=andrew.smirnov@gmail.com \
    --cc=angus@akkea.ca \
    --cc=cphealy@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=edubezval@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git