linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Alexandre Bailon <abailon@baylibre.com>,
	Georgi Djakov <georgi.djakov@linaro.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Viresh Kumar <viresh.kumar@linaro.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Jacky Bai <ping.bai@nxp.com>, Anson Huang <Anson.Huang@nxp.com>,
	Abel Vesa <abel.vesa@nxp.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Saravana Kannan <saravanak@google.com>,
	kernel@pengutronix.de, linux-imx@nxp.com,
	linux-pm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [RFCv2 6/8] devfreq: Add imx-devfreq driver
Date: Fri, 28 Jun 2019 10:39:54 +0300	[thread overview]
Message-ID: <5531b22cdcb056c66fc0a51b4c839df5d86049d0.1561707104.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1561707104.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1561707104.git.leonard.crestez@nxp.com>

Add initial support for frequency switches on pieces of the imx
interconnect fabric.

Uses clk_set_min_rate so that other subsytems can also impose minimum
rate requests.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/devfreq/Kconfig       |  10 +++
 drivers/devfreq/Makefile      |   1 +
 drivers/devfreq/imx-devfreq.c | 142 ++++++++++++++++++++++++++++++++++
 3 files changed, 153 insertions(+)
 create mode 100644 drivers/devfreq/imx-devfreq.c

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index f3b242987fd9..3a7c6265ca2f 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -90,10 +90,20 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  Each memory bus group could contain many memoby bus block. It reads
 	  PPMU counters of memory controllers by using DEVFREQ-event device
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX_DEVFREQ
+	tristate "i.MX DEVFREQ Driver"
+	depends on ARCH_MXC
+	select DEVFREQ_GOV_USERSPACE
+	select PM_OPP
+	help
+	  This adds the DEVFREQ driver for the Tegra family of SoCs.
+	  It reads ACTMON counters of memory controllers and adjusts the
+	  operating frequencies and voltages with OPP support.
+
 config ARM_TEGRA_DEVFREQ
 	tristate "NVIDIA Tegra30/114/124/210 DEVFREQ Driver"
 	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_114_SOC || \
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 338ae8440db6..c2463ed4c934 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -7,10 +7,11 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE)	+= governor_powersave.o
 obj-$(CONFIG_DEVFREQ_GOV_USERSPACE)	+= governor_userspace.o
 obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX_DEVFREQ)		+= imx-devfreq.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
 obj-$(CONFIG_ARM_TEGRA20_DEVFREQ)	+= tegra20-devfreq.o
 
 # DEVFREQ Event Drivers
diff --git a/drivers/devfreq/imx-devfreq.c b/drivers/devfreq/imx-devfreq.c
new file mode 100644
index 000000000000..aa8868d32f22
--- /dev/null
+++ b/drivers/devfreq/imx-devfreq.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/devfreq-event.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_devfreq {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+};
+
+static int imx_devfreq_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	unsigned long new_freq;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	new_freq = dev_pm_opp_get_freq(new_opp);
+	dev_pm_opp_put(new_opp);
+
+	ret = clk_set_min_rate(priv->clk, new_freq);
+        if (ret)
+		return ret;
+
+	ret = clk_set_rate(priv->clk, 0);
+	if (ret) {
+		clk_set_min_rate(priv->clk, priv->devfreq->previous_freq);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx_devfreq_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static int imx_devfreq_get_dev_status(struct device *dev,
+		struct devfreq_dev_status *stat)
+{
+	struct imx_devfreq *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_devfreq_exit(struct device *dev)
+{
+	return dev_pm_opp_of_remove_table(dev);
+}
+
+static int imx_devfreq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_devfreq *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx_devfreq_target;
+	priv->profile.get_dev_status = imx_devfreq_get_dev_status;
+	priv->profile.exit = imx_devfreq_exit;
+	priv->profile.get_cur_freq = imx_devfreq_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						DEVFREQ_GOV_USERSPACE,
+						NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err_remove_table;
+	}
+
+	return 0;
+
+err_remove_table:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_devfreq_of_match[] = {
+	{ .compatible = "fsl,imx8mm-ddrc", },
+	{ .compatible = "fsl,imx8mm-noc", },
+	{ .compatible = "fsl,imx8mm-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_devfreq_of_match);
+
+static struct platform_driver imx_devfreq_platdrv = {
+	.probe		= imx_devfreq_probe,
+	.driver = {
+		.name	= "devfreq-imx",
+		.of_match_table = of_match_ptr(imx_devfreq_of_match),
+	},
+};
+module_platform_driver(imx_devfreq_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


  parent reply	other threads:[~2019-06-28  7:40 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-28  7:39 [RFCv2 0/8] Add imx8mm bus frequency switching Leonard Crestez
2019-06-28  7:39 ` [RFCv2 1/8] clk: imx8mm: Add dram freq switch support Leonard Crestez
2019-06-28  7:39 ` [RFCv2 2/8] clk: imx8m-composite: Switch to determine_rate Leonard Crestez
2019-06-28  8:45   ` Abel Vesa
2019-06-28  8:56     ` Leonard Crestez
2019-07-02  7:13       ` Abel Vesa
2019-06-28  7:39 ` [RFCv2 3/8] arm64: dts: imx8mm: Add dram dvfs irqs to ccm node Leonard Crestez
2019-06-28  7:39 ` [RFCv2 4/8] interconnect: Add generic driver for imx Leonard Crestez
2019-06-28  7:39 ` [RFCv2 5/8] interconnect: imx: Add platform driver for imx8mm Leonard Crestez
2019-06-28  7:39 ` Leonard Crestez [this message]
2019-07-03  1:31   ` [RFCv2 6/8] devfreq: Add imx-devfreq driver Chanwoo Choi
2019-06-28  7:39 ` [RFCv2 7/8] arm64: dts: imx8mm: Add interconnect node Leonard Crestez
2019-06-28  7:39 ` [RFCv2 8/8] arm64: dts: imx8mm: Add devfreq-imx nodes Leonard Crestez
2019-07-03 22:19 ` [RFCv2 0/8] Add imx8mm bus frequency switching Saravana Kannan
2019-07-03 23:30   ` Leonard Crestez
2019-07-04  3:02     ` Saravana Kannan
2019-07-04  8:32       ` Leonard Crestez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5531b22cdcb056c66fc0a51b4c839df5d86049d0.1561707104.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=fabio.estevam@nxp.com \
    --cc=georgi.djakov@linaro.org \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=rafael@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).