Hi,

On Mon, Feb 26, 2024 at 09:44:32PM +0200, Sicelo A. Mhlongo wrote:
> Provide the Online property. This chip does not have specific flags to
> indicate the presence of an input voltage, but this can be inferred from
> the reported charging status.

The datasheet suggests, that you can get the status from the fault
bits:

011 - Poor input source or VBUS < UVLO

Greetings,

-- Sebastian

> 
> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
> ---
>  drivers/power/supply/bq2415x_charger.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
> index 6a4798a62588..5b47a1d0a51a 100644
> --- a/drivers/power/supply/bq2415x_charger.c
> +++ b/drivers/power/supply/bq2415x_charger.c
> @@ -991,6 +991,7 @@ static enum power_supply_property bq2415x_power_supply_props[] = {
>  	/* TODO: maybe add more power supply properties */
>  	POWER_SUPPLY_PROP_STATUS,
>  	POWER_SUPPLY_PROP_MODEL_NAME,
> +	POWER_SUPPLY_PROP_ONLINE,
>  };
>  
>  static int bq2415x_power_supply_get_property(struct power_supply *psy,
> @@ -1017,6 +1018,14 @@ static int bq2415x_power_supply_get_property(struct power_supply *psy,
>  	case POWER_SUPPLY_PROP_MODEL_NAME:
>  		val->strval = bq->model;
>  		break;
> +	case POWER_SUPPLY_PROP_ONLINE:
> +		ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS);
> +		/* Charger is Online when Charging or Full are reported. It is
> +		 * also likely online for the Unknown/Fault state too, but
> +		 * there is no way to be absolutely sure.
> +		 */
> +		val->intval = (ret == 1 || ret == 2);
> +		break;
>  	default:
>  		return -EINVAL;
>  	}
> -- 
> 2.43.0
>