Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Kyungmin Park" <kyungmin.park@samsung.com>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	"Dong Aisheng" <aisheng.dong@nxp.com>,
	"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-imx@nxp.com,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/7] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram_alt/apb
Date: Tue, 20 Aug 2019 18:45:06 +0300
Message-ID: <90bfeebcb76e76d286ed7f022ea9e0d9a569ebe2.1566315740.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1566315740.git.leonard.crestez@nxp.com>

Dram frequency changes required modifying these clocks outside the
control of clk framework. Mark them as CLK_GET_RATE_NOCACHE so that
rates are always read back from registers.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c | 6 ++++--
 drivers/clk/imx/clk-imx8mn.c | 6 ++++--
 drivers/clk/imx/clk-imx8mq.c | 7 ++++---
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 4ead3ea2713c..6cac80550f43 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -526,12 +526,14 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	/* IPG */
 	clks[IMX8MM_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
 	clks[IMX8MM_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
 
 	/* IP */
-	clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
-	clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
+	clks[IMX8MM_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000,
+			CLK_GET_RATE_NOCACHE);
+	clks[IMX8MM_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
 	clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
 	clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
 	clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
 	clks[IMX8MM_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mm_disp_dc8000_sels, base + 0xa280);
 	clks[IMX8MM_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mm_pcie1_ctrl_sels, base + 0xa300);
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 4ea341e4e274..39ed8aa90d22 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -529,12 +529,14 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MN_CLK_AHB] = imx8m_clk_composite_critical("ahb", imx8mn_ahb_sels, base + 0x9000);
 	clks[IMX8MN_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mn_audio_ahb_sels, base + 0x9100);
 	clks[IMX8MN_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
 	clks[IMX8MN_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
 	clks[IMX8MN_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mn_dram_core_sels, ARRAY_SIZE(imx8mn_dram_core_sels), CLK_IS_CRITICAL);
-	clks[IMX8MN_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000);
-	clks[IMX8MN_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mn_dram_apb_sels, base + 0xa080);
+	clks[IMX8MN_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mn_dram_alt_sels, base + 0xa000,
+			CLK_GET_RATE_NOCACHE);
+	clks[IMX8MN_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mn_dram_apb_sels, base + 0xa080,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
 	clks[IMX8MN_CLK_DISP_PIXEL] = imx8m_clk_composite("disp_pixel", imx8mn_disp_pixel_sels, base + 0xa500);
 	clks[IMX8MN_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mn_sai2_sels, base + 0xa600);
 	clks[IMX8MN_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mn_sai3_sels, base + 0xa680);
 	clks[IMX8MN_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mn_sai5_sels, base + 0xa780);
 	clks[IMX8MN_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mn_sai6_sels, base + 0xa800);
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 2350d0d84c37..5573bccb1130 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -436,13 +436,14 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
 	clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
 
 	/* IP */
 	clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
-
-	clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
-	clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
+	clks[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000,
+			CLK_GET_RATE_NOCACHE);
+	clks[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080,
+			CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
 	clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
 	clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
 	clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
 	clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
 	clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);
-- 
2.17.1


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-20 15:45 [PATCH v2 0/7] PM / devfreq: Add initial imx support Leonard Crestez
2019-08-20 15:45 ` Leonard Crestez [this message]
     [not found]   ` <20190916203312.CF8D02067B@mail.kernel.org>
2019-09-16 23:03     ` [PATCH v2 1/7] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram_alt/apb Leonard Crestez
     [not found]       ` <20190917163215.A838020665@mail.kernel.org>
2019-09-17 16:59         ` Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 2/7] dt-bindings: devfreq: Add bindings for generic imx buses Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 3/7] PM / devfreq: Add generic imx bus driver Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 4/7] dt-bindings: devfreq: Add bindings for imx ddr controller Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 5/7] PM / devfreq: Add dynamic scaling " Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 6/7] PM / devfreq: imx-ddrc: Measure bandwidth with perf Leonard Crestez
2019-08-20 15:45 ` [PATCH v2 7/7] arm64: dts: imx8mm: Add devfreq nodes Leonard Crestez

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=90bfeebcb76e76d286ed7f022ea9e0d9a569ebe2.1566315740.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=a.swigon@partner.samsung.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=georgi.djakov@linaro.org \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git