Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/8] Add Mediatek thermal dirver and dtsi
@ 2019-05-10 13:26 michael.kao
  2019-05-10 13:26 ` [PATCH v2 1/8] arm64: dts: mt8183: add thermal zone node michael.kao
                   ` (3 more replies)
  0 siblings, 4 replies; 12+ messages in thread
From: michael.kao @ 2019-05-10 13:26 UTC (permalink / raw)
  To: Zhang Rui, Eduardo Valentin, Daniel Lezcano, Rob Herring,
	Mark Rutland, Matthias Brugger, hsinyi-F7+t8E8rja9g9hUCZPvPmw
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-pm-u79uwXL29TY76Z2rM5mHXA

This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.

This patch series base on these patches [1][2][3][4].

[1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
[2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
[3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
[4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)

Matthias Kaehlcke (2):
	arm64: dts: mt8183: Configure CPU cooling
	arm64: dts: mt8183: Increase polling frequency for CPU thermal zone

Michael Kao (6):
	arm64: dts: mt8183: add thermal zone node
	arm64: dts: mt8183: add/update dynamic power coefficients
	arm64: dts: mt8183: Add #cooling-cells to CPU nodes
	thermal: mediatek: mt8183: fix bank number settings
	thermal: mediatek: add another get_temp ops for thermal sensors
	thermal: mediatek: use spinlock to protect PTPCORESEL

arch/arm64/boot/dts/mediatek/mt8183.dtsi | 158 +++++++++++++++++++++++++++++++
drivers/thermal/mtk_thermal.c            |  82 +++++++++++++---
2 files changed, 226 insertions(+), 14 deletions(-)

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-10 13:26 [PATCH v2 0/8] Add Mediatek thermal dirver and dtsi michael.kao
2019-05-10 13:26 ` [PATCH v2 1/8] arm64: dts: mt8183: add thermal zone node michael.kao
2019-05-30  6:27   ` Hsin-Yi Wang
2019-05-30 16:08     ` Matthias Kaehlcke
     [not found] ` <1557494826-6044-1-git-send-email-michael.kao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-05-10 13:27   ` [PATCH v2 2/8] arm64: dts: mt8183: add/update dynamic power coefficients michael.kao
2019-05-10 13:27   ` [PATCH v2 4/8] arm64: dts: mt8183: Configure CPU cooling michael.kao
2019-05-10 13:27   ` [PATCH v2 5/8] arm64: dts: mt8183: Increase polling frequency for CPU thermal zone michael.kao
2019-05-10 13:27   ` [PATCH v2 6/8] thermal: mediatek: mt8183: fix bank number settings michael.kao
2019-05-10 13:27   ` [PATCH v2 8/8] thermal: mediatek: use spinlock to protect PTPCORESEL michael.kao
2019-05-10 13:27 ` [PATCH v2 3/8] arm64: dts: mt8183: Add #cooling-cells to CPU nodes michael.kao
2019-05-10 13:27 ` [PATCH v2 7/8] thermal: mediatek: add another get_temp ops for thermal sensors michael.kao
2019-09-09 11:13   ` Hsin-Yi Wang

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox