linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rafael@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux PM <linux-pm@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] Power management updates for v6.1-rc1
Date: Mon, 3 Oct 2022 21:56:04 +0200	[thread overview]
Message-ID: <CAJZ5v0ip_C6y1KopyN2pEs7dyqPw6NzKG1WtJSeqyKJeMOYwfA@mail.gmail.com> (raw)

Hi Linus,

Please pull from the tag

 git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
 pm-6.1-rc1

with top-most commit ac73ce394a129a88cb01ce190844bcd172ce14fb

 Merge branches 'pm-cpuidle', 'pm-core', 'pm-sleep' and 'powercap'

on top of commit f76349cf41451c5c42a99f18a9163377e4b364ff

 Linux 6.0-rc7

to receive power management updates for 6.1-rc1.

These add support for some new hardware, extend the existing hardware
support, fix some issues and clean up code.

Specifics:

 - Add support for Tiger Lake in no-HWP mode to intel_pstate (Doug
   Smythies).

 - Update the AMD P-state driver (Perry Yuan):
   * Fix wrong lowest perf fetch.
   * Map desired perf into pstate scope for powersave governor.
   * Update pstate frequency transition delay time.
   * Fix initial highest_perf value.
   * Clean up.

 - Move max CPU capacity to sugov_policy in the schedutil cpufreq
   governor (Lukasz Luba).

 - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).

 - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
   and Yang Yingliang).

 - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
   and Viresh Kumar).

 - Minor cleanups around functions called at module_init() (Xiu Jianfeng).

 - Use module_init and add module_exit for bmips driver (Zhang Jianhua).

 - Add AlderLake-N support to intel_idle (Zhang Rui).

 - Replace strlcpy() with unused retval with strscpy() in intel_idle
   (Wolfram Sang).

 - Remove redundant check from cpuidle_switch_governor() (Yu Liao).

 - Replace strlcpy() with unused retval with strscpy() in the powernv
   cpuidle driver (Wolfram Sang).

 - Drop duplicate word from a comment in the coupled cpuidle driver
   (Jason Wang).

 - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
   in the flags and the device is about to resume (Rafael Wysocki).

 - Add extra debugging statement for multiple active IRQs to system
   wakeup handling code (Mario Limonciello).

 - Replace strlcpy() with unused retval with strscpy() in the core
   system suspend support code (Wolfram Sang).

 - Update the intel_rapl power capping driver:
   * Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
   * Add support for RAPTORLAKE_S (Zhang Rui).
   * Fix UBSAN shift-out-of-bounds issue (Chao Qin).

 - Handle -EPROBE_DEFER when regulator is not probed on
   mtk-ci-devfreq.c (AngeloGioacchino Del Regno).

 - Fix message typo and use dev_err_probe() in rockchip-dfi.c
   (Christophe JAILLET).

Thanks!


---------------

Adam Skladowski (1):
      cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist

AngeloGioacchino Del Regno (1):
      PM / devfreq: mtk-cci: Handle sram regulator probe deferral

Chao Qin (1):
      powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue

Christophe JAILLET (1):
      PM / devfreq: rockchip-dfi: Fix an error message

Doug Smythies (1):
      cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode

Jason Wang (1):
      cpuidle: coupled: Drop duplicate word from a comment

Lukasz Luba (1):
      cpufreq: schedutil: Move max CPU capacity to sugov_policy

Mario Limonciello (1):
      PM: wakeup: Add extra debugging statement for multiple active IRQs

Perry Yuan (6):
      cpufreq: amd-pstate: simplify cpudata pointer assignment
      cpufreq: amd-pstate: fix white-space
      cpufreq: amd_pstate: fix wrong lowest perf fetch
      cpufreq: amd_pstate: map desired perf into pstate scope for
powersave governor
      cpufreq: amd-pstate: update pstate frequency transition delay time
      cpufreq: amd-pstate: Fix initial highest_perf value

Rafael J. Wysocki (1):
      PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case

Sumit Gupta (1):
      cpufreq: tegra194: Add support for Tegra239

Viresh Kumar (1):
      cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning

Wolfram Sang (3):
      cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
      intel_idle: move from strlcpy() with unused retval to strscpy()
      PM: suspend: move from strlcpy() with unused retval to strscpy()

Xiu Jianfeng (1):
      cpufreq: Add __init annotation to module init funcs

Xuewen Yan (1):
      cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh

Yang Yingliang (1):
      cpufreq: tegra194: change tegra239_cpufreq_soc to static

Yu Liao (1):
      cpuidle: Remove redundant check in cpuidle_switch_governor()

Zhang Jianhua (1):
      cpufreq: bmips-cpufreq: Use module_init and add module_exit

Zhang Rui (3):
      powercap: intel_rapl: Add support for RAPTORLAKE_S
      intel_idle: Add AlderLake-N support
      powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain

ye xingchen (1):
      cpufreq: tegra194: Remove the unneeded result variable

---------------

 drivers/base/power/runtime.c         |  7 +++--
 drivers/base/power/wakeup.c          |  2 ++
 drivers/cpufreq/amd-pstate.c         | 39 ++++++++++++++------------
 drivers/cpufreq/bmips-cpufreq.c      | 10 +++++--
 drivers/cpufreq/cpufreq-dt-platdev.c |  1 +
 drivers/cpufreq/highbank-cpufreq.c   |  2 +-
 drivers/cpufreq/intel_pstate.c       |  1 +
 drivers/cpufreq/qcom-cpufreq-hw.c    | 24 ++++++++++++----
 drivers/cpufreq/sti-cpufreq.c        |  2 +-
 drivers/cpufreq/tegra194-cpufreq.c   | 35 +++++++++++-------------
 drivers/cpufreq/ti-cpufreq.c         |  2 +-
 drivers/cpuidle/coupled.c            |  2 +-
 drivers/cpuidle/cpuidle-powernv.c    |  4 +--
 drivers/cpuidle/governor.c           | 11 ++++----
 drivers/devfreq/event/rockchip-dfi.c |  7 ++---
 drivers/devfreq/mtk-cci-devfreq.c    |  8 ++++--
 drivers/idle/intel_idle.c            | 53 +++++++++++++++++++++++++++++++++++-
 drivers/powercap/intel_rapl_common.c |  5 +++-
 include/linux/suspend.h              |  2 +-
 kernel/sched/cpufreq_schedutil.c     | 30 ++++++++++----------
 20 files changed, 165 insertions(+), 82 deletions(-)

             reply	other threads:[~2022-10-03 19:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-03 19:56 Rafael J. Wysocki [this message]
2022-10-03 22:44 ` [GIT PULL] Power management updates for v6.1-rc1 pr-tracker-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJZ5v0ip_C6y1KopyN2pEs7dyqPw6NzKG1WtJSeqyKJeMOYwfA@mail.gmail.com \
    --to=rafael@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).