From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, edubezval@gmail.com,
agross@kernel.org, masneyb@onstation.org, swboyd@chromium.org,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Subject: [PATCH v4 03/15] drivers: thermal: tsens: Add __func__ identifier to debug statements
Date: Fri, 20 Sep 2019 14:52:18 -0700 [thread overview]
Message-ID: <ae5aee22a3688d04819d5a12576da8d8a25e52b5.1569015835.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1569015835.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1569015835.git.amit.kucheria@linaro.org>
Printing the function name when enabling debugging makes logs easier to
read.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/qcom/tsens-common.c | 8 ++++----
drivers/thermal/qcom/tsens.c | 6 +++---
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index c037bdf92c66..7437bfe196e5 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -42,8 +42,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
for (i = 0; i < priv->num_sensors; i++) {
dev_dbg(priv->dev,
- "sensor%d - data_point1:%#x data_point2:%#x\n",
- i, p1[i], p2[i]);
+ "%s: sensor%d - data_point1:%#x data_point2:%#x\n",
+ __func__, i, p1[i], p2[i]);
priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
@@ -60,7 +60,7 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
(CAL_DEGC_PT1 *
priv->sensor[i].slope);
- dev_dbg(priv->dev, "offset:%d\n", priv->sensor[i].offset);
+ dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset);
}
}
@@ -209,7 +209,7 @@ int __init init_common(struct tsens_priv *priv)
if (ret)
goto err_put_device;
if (!enabled) {
- dev_err(dev, "tsens device is not enabled\n");
+ dev_err(dev, "%s: device not enabled\n", __func__);
ret = -ENODEV;
goto err_put_device;
}
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 542a7f8c3d96..06c6bbd69a1a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -127,7 +127,7 @@ static int tsens_probe(struct platform_device *pdev)
of_property_read_u32(np, "#qcom,sensors", &num_sensors);
if (num_sensors <= 0) {
- dev_err(dev, "invalid number of sensors\n");
+ dev_err(dev, "%s: invalid number of sensors\n", __func__);
return -EINVAL;
}
@@ -156,7 +156,7 @@ static int tsens_probe(struct platform_device *pdev)
ret = priv->ops->init(priv);
if (ret < 0) {
- dev_err(dev, "tsens init failed\n");
+ dev_err(dev, "%s: init failed\n", __func__);
return ret;
}
@@ -164,7 +164,7 @@ static int tsens_probe(struct platform_device *pdev)
ret = priv->ops->calibrate(priv);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
- dev_err(dev, "tsens calibration failed\n");
+ dev_err(dev, "%s: calibration failed\n", __func__);
return ret;
}
}
--
2.17.1
next prev parent reply other threads:[~2019-09-20 21:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-20 21:52 [PATCH v4 00/15] thermal: qcom: tsens: Add interrupt support Amit Kucheria
2019-09-20 21:52 ` [PATCH v4 01/15] drivers: thermal: tsens: Get rid of id field in tsens_sensor Amit Kucheria
2019-09-20 21:52 ` [PATCH v4 02/15] drivers: thermal: tsens: Simplify code flow in tsens_probe Amit Kucheria
2019-09-20 21:52 ` Amit Kucheria [this message]
2019-09-20 21:52 ` [PATCH v4 04/15] drivers: thermal: tsens: Add debugfs support Amit Kucheria
2019-09-20 21:52 ` [PATCH v4 07/15] dt-bindings: thermal: tsens: Convert over to a yaml schema Amit Kucheria
2019-09-27 16:29 ` Rob Herring
2019-09-20 21:52 ` [PATCH v4 14/15] drivers: thermal: tsens: Create function to return sign-extended temperature Amit Kucheria
2019-09-20 22:03 ` Stephen Boyd
2019-09-20 21:52 ` [PATCH v4 15/15] drivers: thermal: tsens: Add interrupt support Amit Kucheria
2019-09-20 22:06 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae5aee22a3688d04819d5a12576da8d8a25e52b5.1569015835.git.amit.kucheria@linaro.org \
--to=amit.kucheria@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).