linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: linux-pm@vger.kernel.org, linux-acpi@vger.kernel.org,
	netdev@vger.kernel.org, linux-wireless@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-renesas-soc@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	"Len Brown" <lenb@kernel.org>,
	"Vishal Kulkarni" <vishal@chelsio.com>,
	"David S . Miller" <davem@davemloft.net>,
	"Jiri Pirko" <jiri@mellanox.com>,
	"Ido Schimmel" <idosch@mellanox.com>,
	"Johannes Berg" <johannes.berg@intel.com>,
	"Emmanuel Grumbach" <emmanuel.grumbach@intel.com>,
	"Luca Coelho" <luciano.coelho@intel.com>,
	"Intel Linux Wireless" <linuxwifi@intel.com>,
	"Kalle Valo" <kvalo@codeaurora.org>,
	"Peter Kaestle" <peter@piie.net>,
	"Darren Hart" <dvhart@infradead.org>,
	"Andy Shevchenko" <andy@infradead.org>,
	"Sebastian Reichel" <sre@kernel.org>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Daniel Lezcano" <daniel.lezcano@linaro.org>,
	"Amit Kucheria" <amit.kucheria@verdurent.com>,
	"Support Opensource" <support.opensource@diasemi.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Orson Zhai" <orsonzhai@gmail.com>,
	"Baolin Wang" <baolin.wang7@gmail.com>,
	"Chunyan Zhang" <zhang.lyra@gmail.com>,
	"Zhang Rui" <rui.zhang@intel.com>,
	"Allison Randal" <allison@lohutok.net>,
	"Enrico Weigelt" <info@metux.net>,
	"Gayatri Kammela" <gayatri.kammela@intel.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	kernel@collabora.com
Subject: Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
Date: Wed, 24 Jun 2020 11:40:16 +0200	[thread overview]
Message-ID: <bcdb1c77-97f0-bcad-8c28-6b849d7fde9f@samsung.com> (raw)
In-Reply-To: <20200528192051.28034-5-andrzej.p@collabora.com>


On 5/28/20 9:20 PM, Andrzej Pietrasiewicz wrote:
> Prepare for eliminating get_mode().
> 
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
>  drivers/acpi/thermal.c                        | 18 ++++++----------
>  .../ethernet/mellanox/mlxsw/core_thermal.c    | 21 +++++++------------
>  drivers/platform/x86/acerhdf.c                | 15 ++++++-------
>  drivers/thermal/da9062-thermal.c              |  6 ++----
>  drivers/thermal/imx_thermal.c                 | 17 +++++++--------
>  .../intel/int340x_thermal/int3400_thermal.c   | 12 +++--------
>  .../thermal/intel/intel_quark_dts_thermal.c   | 16 +++++++-------
>  drivers/thermal/thermal_of.c                  | 10 +++------
>  8 files changed, 44 insertions(+), 71 deletions(-)
> 
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index fb46070c66d8..4ba273f49d87 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -172,7 +172,6 @@ struct acpi_thermal {
>  	struct acpi_thermal_trips trips;
>  	struct acpi_handle_list devices;
>  	struct thermal_zone_device *thermal_zone;
> -	enum thermal_device_mode mode;
>  	int kelvin_offset;	/* in millidegrees */
>  	struct work_struct thermal_check_work;
>  };
> @@ -500,7 +499,7 @@ static void acpi_thermal_check(void *data)
>  {
>  	struct acpi_thermal *tz = data;
>  
> -	if (tz->mode != THERMAL_DEVICE_ENABLED)
> +	if (tz->thermal_zone->mode != THERMAL_DEVICE_ENABLED)
>  		return;
>  
>  	thermal_zone_device_update(tz->thermal_zone,
> @@ -529,12 +528,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
>  static int thermal_get_mode(struct thermal_zone_device *thermal,
>  				enum thermal_device_mode *mode)
>  {
> -	struct acpi_thermal *tz = thermal->devdata;
> -
> -	if (!tz)
> -		return -EINVAL;
> -
> -	*mode = tz->mode;
> +	*mode = thermal->mode;
>  
>  	return 0;
>  }
> @@ -556,11 +550,11 @@ static int thermal_set_mode(struct thermal_zone_device *thermal,
>  	if (mode == THERMAL_DEVICE_DISABLED)
>  		pr_warn("thermal zone will be disabled\n");
>  
> -	if (mode != tz->mode) {
> -		tz->mode = mode;
> +	if (mode != tz->thermal_zone->mode) {
> +		tz->thermal_zone->mode = mode;
>  		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
>  			"%s kernel ACPI thermal control\n",
> -			tz->mode == THERMAL_DEVICE_ENABLED ?
> +			tz->thermal_zone->mode == THERMAL_DEVICE_ENABLED ?
>  			"Enable" : "Disable"));
>  		acpi_thermal_check(tz);
>  	}
> @@ -912,7 +906,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
>  		goto remove_dev_link;
>  	}
>  
> -	tz->mode = THERMAL_DEVICE_ENABLED;
> +	tz->thermal_zone->mode = THERMAL_DEVICE_ENABLED;
>  
>  	dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
>  		 tz->thermal_zone->id);
> diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> index ce0a6837daa3..aa082e8a0b13 100644
> --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> @@ -98,7 +98,6 @@ struct mlxsw_thermal_module {
>  	struct mlxsw_thermal *parent;
>  	struct thermal_zone_device *tzdev;
>  	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
> -	enum thermal_device_mode mode;
>  	int module; /* Module or gearbox number */
>  };
>  
> @@ -110,7 +109,6 @@ struct mlxsw_thermal {
>  	struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
>  	u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
>  	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
> -	enum thermal_device_mode mode;
>  	struct mlxsw_thermal_module *tz_module_arr;
>  	u8 tz_module_num;
>  	struct mlxsw_thermal_module *tz_gearbox_arr;
> @@ -280,9 +278,7 @@ static int mlxsw_thermal_unbind(struct thermal_zone_device *tzdev,
>  static int mlxsw_thermal_get_mode(struct thermal_zone_device *tzdev,
>  				  enum thermal_device_mode *mode)
>  {
> -	struct mlxsw_thermal *thermal = tzdev->devdata;
> -
> -	*mode = thermal->mode;
> +	*mode = tzdev->mode;
>  
>  	return 0;
>  }
> @@ -299,9 +295,9 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
>  	else
>  		tzdev->polling_delay = 0;
>  
> +	tzdev->mode = mode;
>  	mutex_unlock(&tzdev->lock);
>  
> -	thermal->mode = mode;
>  	thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
>  
>  	return 0;
> @@ -469,9 +465,7 @@ static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev,
>  static int mlxsw_thermal_module_mode_get(struct thermal_zone_device *tzdev,
>  					 enum thermal_device_mode *mode)
>  {
> -	struct mlxsw_thermal_module *tz = tzdev->devdata;
> -
> -	*mode = tz->mode;
> +	*mode = tzdev->mode;
>  
>  	return 0;
>  }
> @@ -489,9 +483,10 @@ static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
>  	else
>  		tzdev->polling_delay = 0;
>  
> +	tzdev->mode = mode;
> +
>  	mutex_unlock(&tzdev->lock);
>  
> -	tz->mode = mode;
>  	thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
>  
>  	return 0;
> @@ -765,7 +760,7 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)
>  		return err;
>  	}
>  
> -	module_tz->mode = THERMAL_DEVICE_ENABLED;
> +	module_tz->tzdev->mode = THERMAL_DEVICE_ENABLED;
>  	return 0;
>  }
>  
> @@ -881,7 +876,7 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
>  	if (IS_ERR(gearbox_tz->tzdev))
>  		return PTR_ERR(gearbox_tz->tzdev);
>  
> -	gearbox_tz->mode = THERMAL_DEVICE_ENABLED;
> +	gearbox_tz->tzdev->mode = THERMAL_DEVICE_ENABLED;
>  	return 0;
>  }
>  
> @@ -1050,7 +1045,7 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
>  	if (err)
>  		goto err_unreg_modules_tzdev;
>  
> -	thermal->mode = THERMAL_DEVICE_ENABLED;
> +	thermal->tzdev->mode = THERMAL_DEVICE_ENABLED;
>  	*p_thermal = thermal;
>  	return 0;
>  
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> index 830a8b060e74..97b288485837 100644
> --- a/drivers/platform/x86/acerhdf.c
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -68,7 +68,6 @@ static int kernelmode = 1;
>  #else
>  static int kernelmode;
>  #endif
> -static enum thermal_device_mode thermal_mode;
>  
>  static unsigned int interval = 10;
>  static unsigned int fanon = 60000;
> @@ -398,15 +397,16 @@ static inline void acerhdf_revert_to_bios_mode(void)
>  {
>  	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
>  	kernelmode = 0;
> -	thermal_mode = THERMAL_DEVICE_DISABLED;
> -	if (thz_dev)
> +	if (thz_dev) {
> +		thz_dev->mode = THERMAL_DEVICE_DISABLED;
>  		thz_dev->polling_delay = 0;
> +	}
>  	pr_notice("kernel mode fan control OFF\n");
>  }
>  static inline void acerhdf_enable_kernelmode(void)
>  {
>  	kernelmode = 1;
> -	thermal_mode = THERMAL_DEVICE_ENABLED;
> +	thz_dev->mode = THERMAL_DEVICE_ENABLED;
>  
>  	thz_dev->polling_delay = interval*1000;
>  	thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED);
> @@ -419,7 +419,7 @@ static int acerhdf_get_mode(struct thermal_zone_device *thermal,
>  	if (verbose)
>  		pr_notice("kernel mode fan control %d\n", kernelmode);
>  
> -	*mode = thermal_mode;
> +	*mode = thermal->mode;
>  
>  	return 0;
>  }
> @@ -741,8 +741,6 @@ static int __init acerhdf_register_thermal(void)
>  	if (IS_ERR(cl_dev))
>  		return -EINVAL;
>  
> -	thermal_mode = kernelmode ?
> -		THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED;
>  	thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
>  					      &acerhdf_dev_ops,
>  					      &acerhdf_zone_params, 0,
> @@ -750,6 +748,9 @@ static int __init acerhdf_register_thermal(void)
>  	if (IS_ERR(thz_dev))
>  		return -EINVAL;
>  
> +	thz_dev->mode = kernelmode ?
> +		THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED;
> +
>  	if (strcmp(thz_dev->governor->name,
>  				acerhdf_zone_params.governor_name)) {
>  		pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",
> diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
> index c32709badeda..a14c7981c7c7 100644
> --- a/drivers/thermal/da9062-thermal.c
> +++ b/drivers/thermal/da9062-thermal.c
> @@ -49,7 +49,6 @@ struct da9062_thermal {
>  	struct da9062 *hw;
>  	struct delayed_work work;
>  	struct thermal_zone_device *zone;
> -	enum thermal_device_mode mode;
>  	struct mutex lock; /* protection for da9062_thermal temperature */
>  	int temperature;
>  	int irq;
> @@ -124,8 +123,7 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
>  static int da9062_thermal_get_mode(struct thermal_zone_device *z,
>  				   enum thermal_device_mode *mode)
>  {
> -	struct da9062_thermal *thermal = z->devdata;
> -	*mode = thermal->mode;
> +	*mode = z->mode;
>  	return 0;
>  }
>  
> @@ -233,7 +231,6 @@ static int da9062_thermal_probe(struct platform_device *pdev)
>  
>  	thermal->config = match->data;
>  	thermal->hw = chip;
> -	thermal->mode = THERMAL_DEVICE_ENABLED;
>  	thermal->dev = &pdev->dev;
>  
>  	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
> @@ -248,6 +245,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)
>  		ret = PTR_ERR(thermal->zone);
>  		goto err;
>  	}
> +	thermal->zone->mode = THERMAL_DEVICE_ENABLED;
>  
>  	dev_dbg(&pdev->dev,
>  		"TJUNC temperature polling period set at %d ms\n",
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index e761c9b42217..9a1114d721b6 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -197,7 +197,6 @@ struct imx_thermal_data {
>  	struct cpufreq_policy *policy;
>  	struct thermal_zone_device *tz;
>  	struct thermal_cooling_device *cdev;
> -	enum thermal_device_mode mode;
>  	struct regmap *tempmon;
>  	u32 c1, c2; /* See formula in imx_init_calib() */
>  	int temp_passive;
> @@ -256,7 +255,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
>  	bool wait;
>  	u32 val;
>  
> -	if (data->mode == THERMAL_DEVICE_ENABLED) {
> +	if (tz->mode == THERMAL_DEVICE_ENABLED) {
>  		/* Check if a measurement is currently in progress */
>  		regmap_read(map, soc_data->temp_data, &val);
>  		wait = !(val & soc_data->temp_valid_mask);
> @@ -283,7 +282,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
>  
>  	regmap_read(map, soc_data->temp_data, &val);
>  
> -	if (data->mode != THERMAL_DEVICE_ENABLED) {
> +	if (tz->mode != THERMAL_DEVICE_ENABLED) {
>  		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
>  			     soc_data->measure_temp_mask);
>  		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> @@ -334,9 +333,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
>  static int imx_get_mode(struct thermal_zone_device *tz,
>  			enum thermal_device_mode *mode)
>  {
> -	struct imx_thermal_data *data = tz->devdata;
> -
> -	*mode = data->mode;
> +	*mode = tz->mode;
>  
>  	return 0;
>  }
> @@ -376,7 +373,7 @@ static int imx_set_mode(struct thermal_zone_device *tz,
>  		}
>  	}
>  
> -	data->mode = mode;
> +	tz->mode = mode;
>  	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
>  
>  	return 0;
> @@ -831,7 +828,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
>  		     data->socdata->measure_temp_mask);
>  
>  	data->irq_enabled = true;
> -	data->mode = THERMAL_DEVICE_ENABLED;
> +	data->tz->mode = THERMAL_DEVICE_ENABLED;
>  
>  	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
>  			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
> @@ -885,7 +882,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
>  		     data->socdata->measure_temp_mask);
>  	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
>  		     data->socdata->power_down_mask);
> -	data->mode = THERMAL_DEVICE_DISABLED;
> +	data->tz->mode = THERMAL_DEVICE_DISABLED;
>  	clk_disable_unprepare(data->thermal_clk);
>  
>  	return 0;
> @@ -905,7 +902,7 @@ static int __maybe_unused imx_thermal_resume(struct device *dev)
>  		     data->socdata->power_down_mask);
>  	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
>  		     data->socdata->measure_temp_mask);
> -	data->mode = THERMAL_DEVICE_ENABLED;
> +	data->tz->mode = THERMAL_DEVICE_ENABLED;
>  
>  	return 0;
>  }
> diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> index e84faaadff87..f65b2fc09198 100644
> --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
> @@ -48,7 +48,6 @@ struct int3400_thermal_priv {
>  	struct acpi_device *adev;
>  	struct platform_device *pdev;
>  	struct thermal_zone_device *thermal;
> -	enum thermal_device_mode mode;
>  	int art_count;
>  	struct art *arts;
>  	int trt_count;
> @@ -381,12 +380,7 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
>  static int int3400_thermal_get_mode(struct thermal_zone_device *thermal,
>  				enum thermal_device_mode *mode)
>  {
> -	struct int3400_thermal_priv *priv = thermal->devdata;
> -
> -	if (!priv)
> -		return -EINVAL;
> -
> -	*mode = priv->mode;
> +	*mode = thermal->mode;
>  
>  	return 0;
>  }
> @@ -404,8 +398,8 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
>  	    mode != THERMAL_DEVICE_DISABLED)
>  		return -EINVAL;
>  
> -	if (mode != priv->mode) {
> -		priv->mode = mode;
> +	if (mode != thermal->mode) {
> +		thermal->mode = mode;
>  		result = int3400_thermal_run_osc(priv->adev->handle,
>  						priv->current_uuid_index,
>  						mode == THERMAL_DEVICE_ENABLED);
> diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
> index d704fc104cfd..d77cb3df5ade 100644
> --- a/drivers/thermal/intel/intel_quark_dts_thermal.c
> +++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
> @@ -103,7 +103,6 @@ struct soc_sensor_entry {
>  	bool locked;
>  	u32 store_ptps;
>  	u32 store_dts_enable;
> -	enum thermal_device_mode mode;
>  	struct thermal_zone_device *tzone;
>  };
>  
> @@ -128,7 +127,7 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
>  		return ret;
>  
>  	if (out & QRK_DTS_ENABLE_BIT) {
> -		aux_entry->mode = THERMAL_DEVICE_ENABLED;
> +		tzd->mode = THERMAL_DEVICE_ENABLED;
>  		return 0;
>  	}
>  
> @@ -139,9 +138,9 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
>  		if (ret)
>  			return ret;
>  
> -		aux_entry->mode = THERMAL_DEVICE_ENABLED;
> +		tzd->mode = THERMAL_DEVICE_ENABLED;
>  	} else {
> -		aux_entry->mode = THERMAL_DEVICE_DISABLED;
> +		tzd->mode = THERMAL_DEVICE_DISABLED;
>  		pr_info("DTS is locked. Cannot enable DTS\n");
>  		ret = -EPERM;
>  	}
> @@ -161,7 +160,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
>  		return ret;
>  
>  	if (!(out & QRK_DTS_ENABLE_BIT)) {
> -		aux_entry->mode = THERMAL_DEVICE_DISABLED;
> +		tzd->mode = THERMAL_DEVICE_DISABLED;
>  		return 0;
>  	}
>  
> @@ -173,9 +172,9 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
>  		if (ret)
>  			return ret;
>  
> -		aux_entry->mode = THERMAL_DEVICE_DISABLED;
> +		tzd->mode = THERMAL_DEVICE_DISABLED;
>  	} else {
> -		aux_entry->mode = THERMAL_DEVICE_ENABLED;
> +		tzd->mode = THERMAL_DEVICE_ENABLED;
>  		pr_info("DTS is locked. Cannot disable DTS\n");
>  		ret = -EPERM;
>  	}
> @@ -312,8 +311,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
>  static int sys_get_mode(struct thermal_zone_device *tzd,
>  				enum thermal_device_mode *mode)
>  {
> -	struct soc_sensor_entry *aux_entry = tzd->devdata;
> -	*mode = aux_entry->mode;
> +	*mode = tzd->mode;
>  	return 0;
>  }
>  
> diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
> index ddf88dbe7ba2..c495b1e48ef2 100644
> --- a/drivers/thermal/thermal_of.c
> +++ b/drivers/thermal/thermal_of.c
> @@ -51,7 +51,6 @@ struct __thermal_bind_params {
>  
>  /**
>   * struct __thermal_zone - internal representation of a thermal zone
> - * @mode: current thermal zone device mode (enabled/disabled)
>   * @passive_delay: polling interval while passive cooling is activated
>   * @polling_delay: zone polling interval
>   * @slope: slope of the temperature adjustment curve
> @@ -65,7 +64,6 @@ struct __thermal_bind_params {
>   */
>  
>  struct __thermal_zone {
> -	enum thermal_device_mode mode;
>  	int passive_delay;
>  	int polling_delay;
>  	int slope;
> @@ -272,9 +270,7 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
>  static int of_thermal_get_mode(struct thermal_zone_device *tz,
>  			       enum thermal_device_mode *mode)
>  {
> -	struct __thermal_zone *data = tz->devdata;
> -
> -	*mode = data->mode;
> +	*mode = tz->mode;
>  
>  	return 0;
>  }
> @@ -296,7 +292,7 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
>  
>  	mutex_unlock(&tz->lock);
>  
> -	data->mode = mode;
> +	tz->mode = mode;
>  	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
>  
>  	return 0;
> @@ -979,7 +975,6 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
>  
>  finish:
>  	of_node_put(child);
> -	tz->mode = THERMAL_DEVICE_DISABLED;
>  
>  	return tz;
>  
> @@ -1134,6 +1129,7 @@ int __init of_parse_thermal_zones(void)
>  			of_thermal_free_zone(tz);
>  			/* attempting to build remaining zones still */
>  		}
> +		zone->mode = THERMAL_DEVICE_DISABLED;
>  	}
>  	of_node_put(np);
>  
> 

  reply	other threads:[~2020-06-24  9:40 UTC|newest]

Thread overview: 143+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Message-ID: <4493c0e4-51aa-3907-810c-74949ff27ca4@samsung.com>
2020-05-28 19:20 ` [PATCH v4 00/11] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-05-28 19:20   ` [PATCH v4 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-05-29 14:50     ` Guenter Roeck
2020-06-24  8:16     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-05-29 14:48     ` Guenter Roeck
2020-05-29 15:13       ` Andrzej Pietrasiewicz
2020-05-29 15:34         ` Guenter Roeck
2020-06-24  9:38     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-05-29 14:51     ` Guenter Roeck
2020-06-24  9:39     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-24  9:40     ` Bartlomiej Zolnierkiewicz [this message]
2020-05-28 19:20   ` [PATCH v4 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-24  9:47     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-24  9:49     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-24  9:51     ` Bartlomiej Zolnierkiewicz
2020-06-26 16:08       ` Andrzej Pietrasiewicz
2020-05-28 19:20   ` [PATCH v4 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-24 10:00     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-24 10:02     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-24 10:03     ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-24 10:03     ` Bartlomiej Zolnierkiewicz
2020-06-01 11:36   ` [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum Peter Kästle
2020-06-01 11:36   ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Peter Kästle
2020-06-01 11:37   ` [PATCH v4 05/11] thermal: remove get_mode() operation of drivers Peter Kästle
2020-06-01 11:37   ` [PATCH v4 07/11] thermal: Use mode helpers in drivers Peter Kästle
2020-06-01 11:38   ` [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Peter Kästle
2020-06-01 11:38   ` [PATCH v4 11/11] thermal: Rename set_mode() to change_mode() Peter Kästle
2020-06-23 14:37   ` [PATCH v4 00/11] Stop monitoring disabled devices Daniel Lezcano
2020-06-26 17:37     ` [PATCH v5 " Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-29  7:20         ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-26 20:50         ` kernel test robot
2020-06-26 20:50         ` [RFC PATCH] thermal: thermal_zone_device_set_mode() can be static kernel test robot
2020-06-26 20:55         ` [PATCH v5 06/11] thermal: Add mode helpers kernel test robot
2020-06-29  7:04         ` Amit Kucheria
2020-06-29 11:16           ` [PATCH v6 00/11] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-29 12:08               ` Daniel Lezcano
2020-06-29 11:16             ` [PATCH v6 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-01 10:02 ` [PATCH v4 00/11] Stop monitoring disabled devices Peter Kästle
2020-06-01 10:20   ` Andrzej Pietrasiewicz
2020-06-02 15:00 [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Guenter Roeck
  -- strict thread matches above, loose matches on Subject: below --
2020-05-29 19:09 Guenter Roeck
2020-05-29 15:42 Guenter Roeck
2020-05-29 16:08 ` Andrzej Pietrasiewicz
2020-05-29 17:21   ` Andrzej Pietrasiewicz
2020-05-29 19:08     ` Guenter Roeck
2020-04-07 17:49 [RFC 0/8] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 1/8] thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415091204eucas1p1983548c2db52d8d0c2a5367034ec80dd@eucas1p1.samsung.com>
2020-04-15  9:12     ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 2/8] thermal: Properly handle mode values in .set_mode() Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415100543eucas1p24e24293da39844ca8791db86af5365a7@eucas1p2.samsung.com>
2020-04-15 10:05     ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 3/8] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415100944eucas1p1dcfeb784e790ca2fc3417fd2797e3f5d@eucas1p1.samsung.com>
2020-04-15 10:09     ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 4/8] thermal: core: Introduce THERMAL_DEVICE_INITIAL Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 5/8] thermal: core: Monitor thermal zone after mode change Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 6/8] thermal: Set initial state to THERMAL_DEVICE_INITIAL Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 7/8] thermal: of: Monitor thermal zone after enabling it Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415101829eucas1p18e21324d3c39926fffc6c8b5dc52f206@eucas1p1.samsung.com>
2020-04-15 10:18     ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 8/8] thermal: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-09 10:29 ` [RFC 0/8] Stop monitoring disabled devices Daniel Lezcano
2020-04-09 11:10   ` Andrzej Pietrasiewicz
     [not found]     ` <CGME20200415104010eucas1p101278e53e34a2e56dfc7c82b533a9122@eucas1p1.samsung.com>
2020-04-15 10:40       ` Bartlomiej Zolnierkiewicz
2020-04-17 16:23         ` Andrzej Pietrasiewicz
2020-04-19 11:42           ` Bartlomiej Zolnierkiewicz
2020-04-17 21:11         ` Peter Kästle
2020-04-14 18:00   ` [RFC v2 0/9] " Andrzej Pietrasiewicz
2020-04-14 18:00     ` [RFC v2 1/9] thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Andrzej Pietrasiewicz
2020-04-15  9:23       ` Daniel Lezcano
2020-04-14 18:00     ` [RFC v2 2/9] thermal: Eliminate an always-false condition Andrzej Pietrasiewicz
2020-04-14 18:00     ` [RFC v2 3/9] thermal: Properly handle mode values in .set_mode() Andrzej Pietrasiewicz
2020-04-14 22:14       ` Daniel Lezcano
2020-04-14 18:01     ` [RFC v2 4/9] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-14 22:30       ` Daniel Lezcano
2020-04-14 18:01     ` [RFC v2 5/9] thermal: Store mode in thermal_zone_device Andrzej Pietrasiewicz
2020-04-15 10:55       ` Daniel Lezcano
2020-04-17 16:20         ` [RFC v3 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-17 16:20           ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-17 20:44             ` Andy Shevchenko
2020-04-19 11:38             ` Bartlomiej Zolnierkiewicz
2020-04-19 13:10               ` Bartlomiej Zolnierkiewicz
2020-04-20 18:17                 ` [PATCH 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-20 18:17                   ` [PATCH 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-22  7:49                     ` kbuild test robot
2020-04-22 17:14                       ` Andrzej Pietrasiewicz
2020-04-22 17:03                     ` kbuild test robot
2020-04-22 17:15                       ` Andrzej Pietrasiewicz
2020-04-20 18:17                   ` [PATCH 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-22 16:12                   ` [PATCH RESEND 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-23 14:39                     ` Bartlomiej Zolnierkiewicz
2020-04-23 16:57                       ` [PATCH v3 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-23 16:57                         ` [PATCH v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-05-04  7:00                           ` Bartlomiej Zolnierkiewicz
2020-04-23 16:57                         ` [PATCH v3 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-24  9:03                           ` Zhang, Rui
2020-04-27 14:20                             ` Zhang, Rui
2020-04-27 18:34                               ` Andrzej Pietrasiewicz
2020-04-28 13:55                                 ` Zhang, Rui
2020-04-20 11:03               ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-20 18:19                 ` Andrzej Pietrasiewicz
2020-05-23 21:24             ` Daniel Lezcano
2020-05-25 19:35               ` Andrzej Pietrasiewicz
2020-05-25 22:08                 ` Daniel Lezcano
2020-05-26 16:56                   ` Andrzej Pietrasiewicz
2020-05-27 13:30               ` Bartlomiej Zolnierkiewicz
2020-04-17 16:20           ` [RFC v3 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-19 13:50           ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Peter Kästle
2020-04-14 18:01     ` [RFC v2 6/9] thermal: Remove get_mode() method Andrzej Pietrasiewicz
2020-04-14 18:01     ` [RFC v2 7/9] thermal: core: Monitor thermal zone after mode change Andrzej Pietrasiewicz
2020-04-14 18:01     ` [RFC v2 8/9] thermal: of: Monitor thermal zone after enabling it Andrzej Pietrasiewicz
2020-04-14 18:01     ` [RFC v2 9/9] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-14 21:52     ` [RFC v2 0/9] Stop monitoring disabled devices Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bcdb1c77-97f0-bcad-8c28-6b849d7fde9f@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=allison@lohutok.net \
    --cc=amit.kucheria@verdurent.com \
    --cc=andrzej.p@collabora.com \
    --cc=andy@infradead.org \
    --cc=baolin.wang7@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=davem@davemloft.net \
    --cc=dvhart@infradead.org \
    --cc=emmanuel.grumbach@intel.com \
    --cc=festevam@gmail.com \
    --cc=gayatri.kammela@intel.com \
    --cc=heiko@sntech.de \
    --cc=idosch@mellanox.com \
    --cc=info@metux.net \
    --cc=jiri@mellanox.com \
    --cc=johannes.berg@intel.com \
    --cc=kernel@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=kvalo@codeaurora.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linuxwifi@intel.com \
    --cc=luciano.coelho@intel.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=orsonzhai@gmail.com \
    --cc=peter@piie.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=sre@kernel.org \
    --cc=support.opensource@diasemi.com \
    --cc=tglx@linutronix.de \
    --cc=vishal@chelsio.com \
    --cc=zhang.lyra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).