From: Leonard Crestez <leonard.crestez@nxp.com>
To: Matthias Kaehlcke <mka@chromium.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: "Kyungmin Park" <kyungmin.park@samsung.com>,
"Artur Świgoń" <a.swigon@partner.samsung.com>,
"Saravana Kannan" <saravanak@google.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Alexandre Bailon" <abailon@baylibre.com>,
"Georgi Djakov" <georgi.djakov@linaro.org>,
"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Lukasz Luba" <l.luba@partner.samsung.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 6/8] PM / devfreq: Introduce get_freq_range helper
Date: Wed, 2 Oct 2019 22:25:09 +0300 [thread overview]
Message-ID: <c453bb60a74b41a5192e270f286dfc81c1088449.1570044052.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1570044052.git.leonard.crestez@nxp.com>
In-Reply-To: <cover.1570044052.git.leonard.crestez@nxp.com>
Moving handling of min/max freq to a single function and call it from
update_devfreq and for printing min/max freq values in sysfs.
This changes the behavior of out-of-range min_freq/max_freq: clamping
is now done at evaluation time. This means that if an out-of-range
constraint is imposed by sysfs and it later becomes valid then it will
be enforced.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/devfreq/devfreq.c | 110 +++++++++++++++++++++-----------------
1 file changed, 62 insertions(+), 48 deletions(-)
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 87eff789ce24..2d63692903ff 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -96,10 +96,53 @@ static unsigned long find_available_max_freq(struct devfreq *devfreq)
dev_pm_opp_put(opp);
return max_freq;
}
+/**
+ * get_freq_range() - Get the current freq range
+ * @devfreq: the devfreq instance
+ * @min_freq: the min frequency
+ * @max_freq: the max frequency
+ *
+ * This takes into consideration all constraints.
+ */
+static void get_freq_range(struct devfreq *devfreq,
+ unsigned long *min_freq,
+ unsigned long *max_freq)
+{
+ unsigned long *freq_table = devfreq->profile->freq_table;
+
+ lockdep_assert_held(&devfreq->lock);
+
+ /*
+ * Initialize minimum/maximum frequency from freq table.
+ * The devfreq drivers can initialize this in either ascending or
+ * descending order and devfreq core supports both.
+ */
+ if (freq_table[0] < freq_table[devfreq->profile->max_state - 1]) {
+ *min_freq = freq_table[0];
+ *max_freq = freq_table[devfreq->profile->max_state - 1];
+ } else {
+ *min_freq = freq_table[devfreq->profile->max_state - 1];
+ *max_freq = freq_table[0];
+ }
+
+ /* Apply constraints from sysfs */
+ *min_freq = max(*min_freq, devfreq->min_freq);
+ *max_freq = min(*max_freq, devfreq->max_freq);
+
+ /* Apply constraints from OPP interface */
+ *min_freq = max(*min_freq, devfreq->scaling_min_freq);
+ /* scaling_max_freq can be zero on error */
+ if (devfreq->scaling_max_freq)
+ *max_freq = min(*max_freq, devfreq->scaling_max_freq);
+
+ if (*min_freq > *max_freq)
+ *min_freq = *max_freq;
+}
+
/**
* devfreq_get_freq_level() - Lookup freq_table for the frequency
* @devfreq: the devfreq instance
* @freq: the target frequency
*/
@@ -348,20 +391,11 @@ int update_devfreq(struct devfreq *devfreq)
/* Reevaluate the proper frequency */
err = devfreq->governor->get_target_freq(devfreq, &freq);
if (err)
return err;
-
- /*
- * Adjust the frequency with user freq, QoS and available freq.
- *
- * List from the highest priority
- * max_freq
- * min_freq
- */
- max_freq = min(devfreq->scaling_max_freq, devfreq->max_freq);
- min_freq = max(devfreq->scaling_min_freq, devfreq->min_freq);
+ get_freq_range(devfreq, &min_freq, &max_freq);
if (freq < min_freq) {
freq = min_freq;
flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */
}
@@ -1281,40 +1315,28 @@ static ssize_t min_freq_store(struct device *dev, struct device_attribute *attr,
ret = sscanf(buf, "%lu", &value);
if (ret != 1)
return -EINVAL;
mutex_lock(&df->lock);
-
- if (value) {
- if (value > df->max_freq) {
- ret = -EINVAL;
- goto unlock;
- }
- } else {
- unsigned long *freq_table = df->profile->freq_table;
-
- /* Get minimum frequency according to sorting order */
- if (freq_table[0] < freq_table[df->profile->max_state - 1])
- value = freq_table[0];
- else
- value = freq_table[df->profile->max_state - 1];
- }
-
df->min_freq = value;
update_devfreq(df);
- ret = count;
-unlock:
mutex_unlock(&df->lock);
- return ret;
+
+ return count;
}
static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct devfreq *df = to_devfreq(dev);
+ unsigned long min_freq, max_freq;
- return sprintf(buf, "%lu\n", max(df->scaling_min_freq, df->min_freq));
+ mutex_lock(&df->lock);
+ get_freq_range(df, &min_freq, &max_freq);
+ mutex_unlock(&df->lock);
+
+ return sprintf(buf, "%lu\n", min_freq);
}
static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -1326,40 +1348,32 @@ static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr,
if (ret != 1)
return -EINVAL;
mutex_lock(&df->lock);
- if (value) {
- if (value < df->min_freq) {
- ret = -EINVAL;
- goto unlock;
- }
- } else {
- unsigned long *freq_table = df->profile->freq_table;
-
- /* Get maximum frequency according to sorting order */
- if (freq_table[0] < freq_table[df->profile->max_state - 1])
- value = freq_table[df->profile->max_state - 1];
- else
- value = freq_table[0];
- }
+ if (!value)
+ value = ULONG_MAX;
df->max_freq = value;
update_devfreq(df);
- ret = count;
-unlock:
mutex_unlock(&df->lock);
- return ret;
+
+ return count;
}
static DEVICE_ATTR_RW(min_freq);
static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct devfreq *df = to_devfreq(dev);
+ unsigned long min_freq, max_freq;
+
+ mutex_lock(&df->lock);
+ get_freq_range(df, &min_freq, &max_freq);
+ mutex_unlock(&df->lock);
- return sprintf(buf, "%lu\n", min(df->scaling_max_freq, df->max_freq));
+ return sprintf(buf, "%lu\n", max_freq);
}
static DEVICE_ATTR_RW(max_freq);
static ssize_t available_frequencies_show(struct device *d,
struct device_attribute *attr,
--
2.17.1
next prev parent reply other threads:[~2019-10-02 19:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 19:25 [PATCH v9 0/8] PM / devfreq: Add dev_pm_qos support Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 1/8] PM / devfreq: Don't fail devfreq_dev_release if not in list Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 2/8] PM / devfreq: Fix devfreq_notifier_call returning errno Leonard Crestez
2019-10-02 21:24 ` Matthias Kaehlcke
2019-10-02 23:47 ` Leonard Crestez
2019-10-31 2:29 ` Chanwoo Choi
2019-10-02 19:25 ` [PATCH v9 3/8] PM / devfreq: Set scaling_max_freq to max on OPP notifier error Leonard Crestez
2019-10-02 21:33 ` Matthias Kaehlcke
2019-10-31 2:21 ` Chanwoo Choi
2019-10-02 19:25 ` [PATCH v9 4/8] PM / devfreq: Move more initialization before registration Leonard Crestez
2019-10-31 3:15 ` Chanwoo Choi
2019-10-31 13:31 ` Leonard Crestez
2019-11-01 8:31 ` Chanwoo Choi
2019-11-01 14:36 ` Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 5/8] PM / devfreq: Don't take lock in devfreq_add_device Leonard Crestez
2019-10-02 19:25 ` Leonard Crestez [this message]
2019-10-03 18:19 ` [PATCH v9 6/8] PM / devfreq: Introduce get_freq_range helper Matthias Kaehlcke
2019-10-03 19:16 ` Leonard Crestez
2019-10-03 19:36 ` Matthias Kaehlcke
2019-10-11 18:29 ` Matthias Kaehlcke
2019-10-31 2:44 ` Chanwoo Choi
2019-10-31 2:42 ` Chanwoo Choi
2019-10-31 13:12 ` Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 7/8] PM / devfreq: Add PM QoS support Leonard Crestez
2019-10-02 22:22 ` Matthias Kaehlcke
2019-10-04 17:04 ` Matthias Kaehlcke
2019-10-31 3:01 ` Chanwoo Choi
2019-10-31 13:21 ` Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 8/8] PM / devfreq: Use PM QoS for sysfs min/max_freq Leonard Crestez
2019-10-04 17:05 ` Matthias Kaehlcke
2019-10-31 3:10 ` Chanwoo Choi
2019-10-23 14:06 ` [PATCH v9 0/8] PM / devfreq: Add dev_pm_qos support Leonard Crestez
2019-10-23 16:34 ` Matthias Kaehlcke
2019-10-24 16:21 ` Leonard Crestez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c453bb60a74b41a5192e270f286dfc81c1088449.1570044052.git.leonard.crestez@nxp.com \
--to=leonard.crestez@nxp.com \
--cc=a.swigon@partner.samsung.com \
--cc=abailon@baylibre.com \
--cc=abel.vesa@nxp.com \
--cc=cw00.choi@samsung.com \
--cc=georgi.djakov@linaro.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=l.luba@partner.samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-pm@vger.kernel.org \
--cc=mka@chromium.org \
--cc=myungjoo.ham@samsung.com \
--cc=ping.bai@nxp.com \
--cc=saravanak@google.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).