[PATCH 02/10] video: sa1100fb: Remove cpufreq policy notifier

[PATCH 02/10] video: sa1100fb: Remove cpufreq policy notifier

[Viresh Kumar]

The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to
get removed soon.

The notifier callback sa1100fb_freq_policy() isn't doing anything apart
from printing a debug message on CPUFREQ_ADJUST notification. There is
no point in keeping an otherwise empty callback and registering the
notifier.

Remove it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/video/fbdev/sa1100fb.c | 27 ---------------------------
 drivers/video/fbdev/sa1100fb.h |  1 -
 2 files changed, 28 deletions(-)

diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index f7f8dee044b1..ae2bcfee338a 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -1005,31 +1005,6 @@ sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
 	}
 	return 0;
 }
-
-static int
-sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
-		     void *data)
-{
-	struct sa1100fb_info *fbi = TO_INF(nb, freq_policy);
-	struct cpufreq_policy *policy = data;
-
-	switch (val) {
-	case CPUFREQ_ADJUST:
-		dev_dbg(fbi->dev, "min dma period: %d ps, "
-			"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
-			policy->max);
-		/* todo: fill in min/max values */
-		break;
-	case CPUFREQ_NOTIFY:
-		do {} while(0);
-		/* todo: panic if min/max values aren't fulfilled 
-		 * [can't really happen unless there's a bug in the
-		 * CPU policy verififcation process *
-		 */
-		break;
-	}
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_PM
@@ -1242,9 +1217,7 @@ static int sa1100fb_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
-	fbi->freq_policy.notifier_call = sa1100fb_freq_policy;
 	cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
-	cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
 #endif
 
 	/* This driver cannot be unloaded at the moment */
diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index 7a1a9ca33cec..d0aa33b0b88a 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
@@ -64,7 +64,6 @@ struct sa1100fb_info {
 
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
-	struct notifier_block	freq_policy;
 #endif
 
 	const struct sa1100fb_mach_info *inf;
-- 
2.21.0.rc0.269.g1a574e7a288b

Re: [PATCH 02/10] video: sa1100fb: Remove cpufreq policy notifier

[Bartlomiej Zolnierkiewicz]

Hi Viresh,

Please always Cc: me on fbdev patches.

On 7/16/19 11:54 AM, Viresh Kumar wrote:
> The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to
> get removed soon.
> 
> The notifier callback sa1100fb_freq_policy() isn't doing anything apart
> from printing a debug message on CPUFREQ_ADJUST notification. There is
> no point in keeping an otherwise empty callback and registering the
> notifier.
> 
> Remove it.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

Re: [PATCH 02/10] video: sa1100fb: Remove cpufreq policy notifier

[Viresh Kumar]

On 16-07-19, 14:25, Bartlomiej Zolnierkiewicz wrote:
> 
> Hi Viresh,
> 
> Please always Cc: me on fbdev patches.

That happened because I used patter-depth=1 in my script for finding
maintainers from get_maintainers. Sorry about that. I have incremented
that by one now.

-- 
viresh

[PATCH 03/10] video: pxafb: Remove cpufreq policy notifier

[Viresh Kumar]

The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to
get removed soon.

The notifier callback pxafb_freq_policy() isn't doing anything apart
from printing a debug message on CPUFREQ_ADJUST notification. There is
no point in keeping an otherwise empty callback and registering the
notifier.

Remove it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/video/fbdev/pxafb.c | 21 ---------------------
 drivers/video/fbdev/pxafb.h |  1 -
 2 files changed, 22 deletions(-)

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 4282cb117b92..f70c9f79622e 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -1678,24 +1678,6 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
 	}
 	return 0;
 }
-
-static int
-pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
-{
-	struct pxafb_info *fbi = TO_INF(nb, freq_policy);
-	struct fb_var_screeninfo *var = &fbi->fb.var;
-	struct cpufreq_policy *policy = data;
-
-	switch (val) {
-	case CPUFREQ_ADJUST:
-		pr_debug("min dma period: %d ps, "
-			"new clock %d kHz\n", pxafb_display_dma_period(var),
-			policy->max);
-		/* TODO: fill in min/max values */
-		break;
-	}
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_PM
@@ -2400,11 +2382,8 @@ static int pxafb_probe(struct platform_device *dev)
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = pxafb_freq_transition;
-	fbi->freq_policy.notifier_call = pxafb_freq_policy;
 	cpufreq_register_notifier(&fbi->freq_transition,
 				CPUFREQ_TRANSITION_NOTIFIER);
-	cpufreq_register_notifier(&fbi->freq_policy,
-				CPUFREQ_POLICY_NOTIFIER);
 #endif
 
 	/*
diff --git a/drivers/video/fbdev/pxafb.h b/drivers/video/fbdev/pxafb.h
index b641289c8a99..86b1e9ab1a38 100644
--- a/drivers/video/fbdev/pxafb.h
+++ b/drivers/video/fbdev/pxafb.h
@@ -162,7 +162,6 @@ struct pxafb_info {
 
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
-	struct notifier_block	freq_policy;
 #endif
 
 	struct regulator *lcd_supply;
-- 
2.21.0.rc0.269.g1a574e7a288b

Re: [PATCH 03/10] video: pxafb: Remove cpufreq policy notifier

[Bartlomiej Zolnierkiewicz]

On 7/16/19 11:54 AM, Viresh Kumar wrote:
> The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to
> get removed soon.
> 
> The notifier callback pxafb_freq_policy() isn't doing anything apart
> from printing a debug message on CPUFREQ_ADJUST notification. There is
> no point in keeping an otherwise empty callback and registering the
> notifier.
> 
> Remove it.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

[PATCH 04/10] arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY

[Viresh Kumar]

CPUFREQ_NOTIFY is going to get removed soon, lets use
CPUFREQ_CREATE_POLICY instead of that here. CPUFREQ_CREATE_POLICY is
called only once (which is exactly what we want here) for each cpufreq
policy when it is first created.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/arch_topology.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 9b09e31ae82f..49f2884fe77f 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -175,7 +175,7 @@ init_cpu_capacity_callback(struct notifier_block *nb,
 	if (!raw_capacity)
 		return 0;
 
-	if (val != CPUFREQ_NOTIFY)
+	if (val != CPUFREQ_CREATE_POLICY)
 		return 0;
 
 	pr_debug("cpu_capacity: init cpu capacity for CPUs [%*pbl] (to_visit=%*pbl)\n",
-- 
2.21.0.rc0.269.g1a574e7a288b

[PATCH 05/10] thermal: cpu_cooling: Switch to QoS requests instead of cpufreq notifier

[Viresh Kumar]

The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.

Switch over to using the QoS request for maximum frequency constraint
for cpu_cooling driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/thermal/cpu_cooling.c | 110 ++++++++--------------------------
 1 file changed, 26 insertions(+), 84 deletions(-)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 4c5db59a619b..391f39776c6a 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/idr.h>
 #include <linux/pm_opp.h>
+#include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
@@ -66,8 +67,6 @@ struct time_in_idle {
  * @last_load: load measured by the latest call to cpufreq_get_requested_power()
  * @cpufreq_state: integer value representing the current state of cpufreq
  *	cooling	devices.
- * @clipped_freq: integer value representing the absolute value of the clipped
- *	frequency.
  * @max_level: maximum cooling level. One less than total number of valid
  *	cpufreq frequencies.
  * @freq_table: Freq table in descending order of frequencies
@@ -84,12 +83,12 @@ struct cpufreq_cooling_device {
 	int id;
 	u32 last_load;
 	unsigned int cpufreq_state;
-	unsigned int clipped_freq;
 	unsigned int max_level;
 	struct freq_table *freq_table;	/* In descending order */
 	struct cpufreq_policy *policy;
 	struct list_head node;
 	struct time_in_idle *idle_time;
+	struct dev_pm_qos_request qos_req;
 };
 
 static DEFINE_IDA(cpufreq_ida);
@@ -118,59 +117,6 @@ static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
 	return level - 1;
 }
 
-/**
- * cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
- * @nb:	struct notifier_block * with callback info.
- * @event: value showing cpufreq event for which this function invoked.
- * @data: callback-specific data
- *
- * Callback to hijack the notification on cpufreq policy transition.
- * Every time there is a change in policy, we will intercept and
- * update the cpufreq policy with thermal constraints.
- *
- * Return: 0 (success)
- */
-static int cpufreq_thermal_notifier(struct notifier_block *nb,
-				    unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	unsigned long clipped_freq;
-	struct cpufreq_cooling_device *cpufreq_cdev;
-
-	if (event != CPUFREQ_ADJUST)
-		return NOTIFY_DONE;
-
-	mutex_lock(&cooling_list_lock);
-	list_for_each_entry(cpufreq_cdev, &cpufreq_cdev_list, node) {
-		/*
-		 * A new copy of the policy is sent to the notifier and can't
-		 * compare that directly.
-		 */
-		if (policy->cpu != cpufreq_cdev->policy->cpu)
-			continue;
-
-		/*
-		 * policy->max is the maximum allowed frequency defined by user
-		 * and clipped_freq is the maximum that thermal constraints
-		 * allow.
-		 *
-		 * If clipped_freq is lower than policy->max, then we need to
-		 * readjust policy->max.
-		 *
-		 * But, if clipped_freq is greater than policy->max, we don't
-		 * need to do anything.
-		 */
-		clipped_freq = cpufreq_cdev->clipped_freq;
-
-		if (policy->max > clipped_freq)
-			cpufreq_verify_within_limits(policy, 0, clipped_freq);
-		break;
-	}
-	mutex_unlock(&cooling_list_lock);
-
-	return NOTIFY_OK;
-}
-
 /**
  * update_freq_table() - Update the freq table with power numbers
  * @cpufreq_cdev:	the cpufreq cooling device in which to update the table
@@ -374,7 +320,6 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long state)
 {
 	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-	unsigned int clip_freq;
 
 	/* Request state should be less than max_level */
 	if (WARN_ON(state > cpufreq_cdev->max_level))
@@ -384,13 +329,10 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	if (cpufreq_cdev->cpufreq_state == state)
 		return 0;
 
-	clip_freq = cpufreq_cdev->freq_table[state].frequency;
 	cpufreq_cdev->cpufreq_state = state;
-	cpufreq_cdev->clipped_freq = clip_freq;
-
-	cpufreq_update_policy(cpufreq_cdev->policy->cpu);
 
-	return 0;
+	return dev_pm_qos_update_request(&cpufreq_cdev->qos_req,
+				cpufreq_cdev->freq_table[state].frequency);
 }
 
 /**
@@ -554,11 +496,6 @@ static struct thermal_cooling_device_ops cpufreq_power_cooling_ops = {
 	.power2state		= cpufreq_power2state,
 };
 
-/* Notifier for cpufreq policy change */
-static struct notifier_block thermal_cpufreq_notifier_block = {
-	.notifier_call = cpufreq_thermal_notifier,
-};
-
 static unsigned int find_next_max(struct cpufreq_frequency_table *table,
 				  unsigned int prev_max)
 {
@@ -596,9 +533,16 @@ __cpufreq_cooling_register(struct device_node *np,
 	struct cpufreq_cooling_device *cpufreq_cdev;
 	char dev_name[THERMAL_NAME_LENGTH];
 	unsigned int freq, i, num_cpus;
+	struct device *dev;
 	int ret;
 	struct thermal_cooling_device_ops *cooling_ops;
-	bool first;
+
+	dev = get_cpu_device(policy->cpu);
+	if (unlikely(!dev)) {
+		pr_warn("No cpu device for cpu %d\n", policy->cpu);
+		return ERR_PTR(-ENODEV);
+	}
+
 
 	if (IS_ERR_OR_NULL(policy)) {
 		pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy);
@@ -671,25 +615,29 @@ __cpufreq_cooling_register(struct device_node *np,
 		cooling_ops = &cpufreq_cooling_ops;
 	}
 
+	ret = dev_pm_qos_add_request(dev, &cpufreq_cdev->qos_req,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     cpufreq_cdev->freq_table[0].frequency);
+	if (ret < 0) {
+		pr_err("%s: Failed to add freq constraint (%d)\n", __func__,
+		       ret);
+		cdev = ERR_PTR(ret);
+		goto remove_ida;
+	}
+
 	cdev = thermal_of_cooling_device_register(np, dev_name, cpufreq_cdev,
 						  cooling_ops);
 	if (IS_ERR(cdev))
-		goto remove_ida;
-
-	cpufreq_cdev->clipped_freq = cpufreq_cdev->freq_table[0].frequency;
+		goto remove_qos_req;
 
 	mutex_lock(&cooling_list_lock);
-	/* Register the notifier for first cpufreq cooling device */
-	first = list_empty(&cpufreq_cdev_list);
 	list_add(&cpufreq_cdev->node, &cpufreq_cdev_list);
 	mutex_unlock(&cooling_list_lock);
 
-	if (first)
-		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
-					  CPUFREQ_POLICY_NOTIFIER);
-
 	return cdev;
 
+remove_qos_req:
+	dev_pm_qos_remove_request(&cpufreq_cdev->qos_req);
 remove_ida:
 	ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
 free_table:
@@ -777,7 +725,6 @@ EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
 	struct cpufreq_cooling_device *cpufreq_cdev;
-	bool last;
 
 	if (!cdev)
 		return;
@@ -786,15 +733,10 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
 	mutex_lock(&cooling_list_lock);
 	list_del(&cpufreq_cdev->node);
-	/* Unregister the notifier for the last cpufreq cooling device */
-	last = list_empty(&cpufreq_cdev_list);
 	mutex_unlock(&cooling_list_lock);
 
-	if (last)
-		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
-					    CPUFREQ_POLICY_NOTIFIER);
-
 	thermal_cooling_device_unregister(cdev);
+	dev_pm_qos_remove_request(&cpufreq_cdev->qos_req);
 	ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
 	kfree(cpufreq_cdev->idle_time);
 	kfree(cpufreq_cdev->freq_table);
-- 
2.21.0.rc0.269.g1a574e7a288b

[PATCH 06/10] powerpc: macintosh: Switch to QoS requests instead of cpufreq notifier

[Viresh Kumar]

The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.

Switch over to using the QoS request for maximum frequency constraint
for windfarm_cpufreq_clamp driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/macintosh/windfarm_cpufreq_clamp.c | 77 ++++++++++++++--------
 1 file changed, 50 insertions(+), 27 deletions(-)

diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 52fd5fca89a0..705c6200814b 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -3,9 +3,11 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/wait.h>
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 
 #include <asm/prom.h>
@@ -16,36 +18,24 @@
 
 static int clamped;
 static struct wf_control *clamp_control;
-
-static int clamp_notifier_call(struct notifier_block *self,
-			       unsigned long event, void *data)
-{
-	struct cpufreq_policy *p = data;
-	unsigned long max_freq;
-
-	if (event != CPUFREQ_ADJUST)
-		return 0;
-
-	max_freq = clamped ? (p->cpuinfo.min_freq) : (p->cpuinfo.max_freq);
-	cpufreq_verify_within_limits(p, 0, max_freq);
-
-	return 0;
-}
-
-static struct notifier_block clamp_notifier = {
-	.notifier_call = clamp_notifier_call,
-};
+static struct dev_pm_qos_request qos_req;
+static unsigned int min_freq, max_freq;
 
 static int clamp_set(struct wf_control *ct, s32 value)
 {
-	if (value)
+	unsigned int freq;
+
+	if (value) {
+		freq = min_freq;
 		printk(KERN_INFO "windfarm: Clamping CPU frequency to "
 		       "minimum !\n");
-	else
+	} else {
+		freq = max_freq;
 		printk(KERN_INFO "windfarm: CPU frequency unclamped !\n");
+	}
 	clamped = value;
-	cpufreq_update_policy(0);
-	return 0;
+
+	return dev_pm_qos_update_request(&qos_req, freq);
 }
 
 static int clamp_get(struct wf_control *ct, s32 *value)
@@ -74,27 +64,60 @@ static const struct wf_control_ops clamp_ops = {
 
 static int __init wf_cpufreq_clamp_init(void)
 {
+	struct cpufreq_policy *policy;
 	struct wf_control *clamp;
+	struct device *dev;
+	int ret;
+
+	policy = cpufreq_cpu_get(0);
+	if (!policy) {
+		pr_warn("%s: cpufreq policy not found cpu0\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	min_freq = policy->cpuinfo.min_freq;
+	max_freq = policy->cpuinfo.max_freq;
+	cpufreq_cpu_put(policy);
+
+	dev = get_cpu_device(0);
+	if (unlikely(!dev)) {
+		pr_warn("%s: No cpu device for cpu0\n", __func__);
+		return -ENODEV;
+	}
 
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
 	if (clamp == NULL)
 		return -ENOMEM;
-	cpufreq_register_notifier(&clamp_notifier, CPUFREQ_POLICY_NOTIFIER);
+
+	ret = dev_pm_qos_add_request(dev, &qos_req, DEV_PM_QOS_MAX_FREQUENCY,
+				     max_freq);
+	if (ret < 0) {
+		pr_err("%s: Failed to add freq constraint (%d)\n", __func__,
+		       ret);
+		goto free;
+	}
+
 	clamp->ops = &clamp_ops;
 	clamp->name = "cpufreq-clamp";
-	if (wf_register_control(clamp))
+	ret = wf_register_control(clamp);
+	if (ret)
 		goto fail;
 	clamp_control = clamp;
 	return 0;
  fail:
+	dev_pm_qos_remove_request(&qos_req);
+
+ free:
 	kfree(clamp);
-	return -ENODEV;
+	return ret;
 }
 
 static void __exit wf_cpufreq_clamp_exit(void)
 {
-	if (clamp_control)
+	if (clamp_control) {
 		wf_unregister_control(clamp_control);
+		dev_pm_qos_remove_request(&qos_req);
+	}
 }
 
 
-- 
2.21.0.rc0.269.g1a574e7a288b

[PATCH 07/10] cpufreq: powerpc_cbe: Switch to QoS requests instead of cpufreq notifier

[Viresh Kumar]

The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.

Switch over to using the QoS request for maximum frequency constraint
for ppc_cbe_cpufreq driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/ppc_cbe_cpufreq.c     | 19 +++++-
 drivers/cpufreq/ppc_cbe_cpufreq.h     |  8 +++
 drivers/cpufreq/ppc_cbe_cpufreq_pmi.c | 96 +++++++++++++++++----------
 3 files changed, 86 insertions(+), 37 deletions(-)

diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
index b83f36febf03..c58abb4cca3a 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -110,6 +110,13 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 #endif
 
 	policy->freq_table = cbe_freqs;
+	cbe_cpufreq_pmi_policy_init(policy);
+	return 0;
+}
+
+static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cbe_cpufreq_pmi_policy_exit(policy);
 	return 0;
 }
 
@@ -129,6 +136,7 @@ static struct cpufreq_driver cbe_cpufreq_driver = {
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= cbe_cpufreq_target,
 	.init		= cbe_cpufreq_cpu_init,
+	.exit		= cbe_cpufreq_cpu_exit,
 	.name		= "cbe-cpufreq",
 	.flags		= CPUFREQ_CONST_LOOPS,
 };
@@ -139,15 +147,24 @@ static struct cpufreq_driver cbe_cpufreq_driver = {
 
 static int __init cbe_cpufreq_init(void)
 {
+	int ret;
+
 	if (!machine_is(cell))
 		return -ENODEV;
 
-	return cpufreq_register_driver(&cbe_cpufreq_driver);
+	cbe_cpufreq_pmi_init();
+
+	ret = cpufreq_register_driver(&cbe_cpufreq_driver);
+	if (ret)
+		cbe_cpufreq_pmi_exit();
+
+	return ret;
 }
 
 static void __exit cbe_cpufreq_exit(void)
 {
 	cpufreq_unregister_driver(&cbe_cpufreq_driver);
+	cbe_cpufreq_pmi_exit();
 }
 
 module_init(cbe_cpufreq_init);
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
index 9d973519d669..00cd8633b0d9 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.h
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.h
@@ -20,6 +20,14 @@ int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
 
 #if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
 extern bool cbe_cpufreq_has_pmi;
+void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy);
+void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy);
+void cbe_cpufreq_pmi_init(void);
+void cbe_cpufreq_pmi_exit(void);
 #else
 #define cbe_cpufreq_has_pmi (0)
+static inline void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy) {}
+static inline void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy) {}
+static inline void cbe_cpufreq_pmi_init(void) {}
+static inline void cbe_cpufreq_pmi_exit(void) {}
 #endif
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 97c8ee4614b7..0babb27c1c72 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -12,6 +12,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/pm_qos.h>
 
 #include <asm/processor.h>
 #include <asm/prom.h>
@@ -24,8 +25,6 @@
 
 #include "ppc_cbe_cpufreq.h"
 
-static u8 pmi_slow_mode_limit[MAX_CBE];
-
 bool cbe_cpufreq_has_pmi = false;
 EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi);
 
@@ -65,64 +64,89 @@ EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi);
 
 static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg)
 {
+	struct cpufreq_policy *policy;
+	struct dev_pm_qos_request *req;
 	u8 node, slow_mode;
+	int cpu, ret;
 
 	BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
 
 	node = pmi_msg.data1;
 	slow_mode = pmi_msg.data2;
 
-	pmi_slow_mode_limit[node] = slow_mode;
+	cpu = cbe_node_to_cpu(node);
 
 	pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode);
-}
-
-static int pmi_notifier(struct notifier_block *nb,
-				       unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	struct cpufreq_frequency_table *cbe_freqs = policy->freq_table;
-	u8 node;
-
-	/* Should this really be called for CPUFREQ_ADJUST and CPUFREQ_NOTIFY
-	 * policy events?)
-	 */
-	node = cbe_cpu_to_node(policy->cpu);
-
-	pr_debug("got notified, event=%lu, node=%u\n", event, node);
 
-	if (pmi_slow_mode_limit[node] != 0) {
-		pr_debug("limiting node %d to slow mode %d\n",
-			 node, pmi_slow_mode_limit[node]);
+	policy = cpufreq_cpu_get(cpu);
+	if (!policy) {
+		pr_warn("cpufreq policy not found cpu%d\n", cpu);
+		return;
+	}
 
-		cpufreq_verify_within_limits(policy, 0,
+	req = policy->driver_data;
 
-			cbe_freqs[pmi_slow_mode_limit[node]].frequency);
-	}
+	ret = dev_pm_qos_update_request(req,
+			policy->freq_table[slow_mode].frequency);
+	if (ret)
+		pr_warn("Failed to update freq constraint: %d\n", ret);
+	else
+		pr_debug("limiting node %d to slow mode %d\n", node, slow_mode);
 
-	return 0;
+	cpufreq_cpu_put(policy);
 }
 
-static struct notifier_block pmi_notifier_block = {
-	.notifier_call = pmi_notifier,
-};
-
 static struct pmi_handler cbe_pmi_handler = {
 	.type			= PMI_TYPE_FREQ_CHANGE,
 	.handle_pmi_message	= cbe_cpufreq_handle_pmi,
 };
 
+void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy)
+{
+	struct dev_pm_qos_request *req;
+	int ret;
+
+	if (!cbe_cpufreq_has_pmi)
+		return;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return;
+
+	ret = dev_pm_qos_add_request(get_cpu_device(policy->cpu), req,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     policy->freq_table[0].frequency);
+	if (ret < 0) {
+		pr_err("Failed to add freq constraint (%d)\n", ret);
+		kfree(req);
+		return;
+	}
 
+	policy->driver_data = req;
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_init);
 
-static int __init cbe_cpufreq_pmi_init(void)
+void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy)
 {
-	cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0;
+	struct dev_pm_qos_request *req = policy->driver_data;
 
-	if (!cbe_cpufreq_has_pmi)
-		return -ENODEV;
+	if (cbe_cpufreq_has_pmi) {
+		dev_pm_qos_remove_request(req);
+		kfree(req);
+	}
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_exit);
 
-	cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
+void cbe_cpufreq_pmi_init(void)
+{
+	if (!pmi_register_handler(&cbe_pmi_handler))
+		cbe_cpufreq_has_pmi = true;
+}
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_init);
 
-	return 0;
+void cbe_cpufreq_pmi_exit(void)
+{
+	pmi_unregister_handler(&cbe_pmi_handler);
+	cbe_cpufreq_has_pmi = false;
 }
-device_initcall(cbe_cpufreq_pmi_init);
+EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_exit);
-- 
2.21.0.rc0.269.g1a574e7a288b

[PATCH 08/10] ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier

[Viresh Kumar]

The cpufreq core now takes the min/max frequency constraints via QoS
requests and the CPUFREQ_ADJUST notifier shall get removed later on.

Switch over to using the QoS request for maximum frequency constraint
for acpi driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/acpi/processor_driver.c  |  44 +++++++++++--
 drivers/acpi/processor_perflib.c | 106 +++++++++++++------------------
 drivers/acpi/processor_thermal.c |  81 ++++++++++++-----------
 include/acpi/processor.h         |  22 ++++---
 4 files changed, 137 insertions(+), 116 deletions(-)

diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index aea8d674a33d..e7a3f07e9879 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -284,6 +284,35 @@ static int acpi_processor_stop(struct device *dev)
 	return 0;
 }
 
+bool acpi_processor_cpufreq_init;
+
+static int acpi_processor_notifier(struct notifier_block *nb,
+				   unsigned long event, void *data)
+{
+	struct cpufreq_policy *policy = data;
+	int cpu;
+
+	if (event == CPUFREQ_CREATE_POLICY) {
+		for_each_cpu(cpu, policy->cpus)
+			per_cpu(processors, cpu)->policy = policy;
+
+		acpi_thermal_cpufreq_init(policy);
+		acpi_processor_ppc_init(policy);
+	} else if (event == CPUFREQ_REMOVE_POLICY) {
+		acpi_processor_ppc_exit(policy);
+		acpi_thermal_cpufreq_exit(policy);
+
+		for_each_cpu(cpu, policy->cpus)
+			per_cpu(processors, cpu)->policy = NULL;
+	}
+
+	return 0;
+}
+
+static struct notifier_block acpi_processor_notifier_block = {
+	.notifier_call = acpi_processor_notifier,
+};
+
 /*
  * We keep the driver loaded even when ACPI is not running.
  * This is needed for the powernow-k8 driver, that works even without
@@ -310,8 +339,11 @@ static int __init acpi_processor_driver_init(void)
 	cpuhp_setup_state_nocalls(CPUHP_ACPI_CPUDRV_DEAD, "acpi/cpu-drv:dead",
 				  NULL, acpi_soft_cpu_dead);
 
-	acpi_thermal_cpufreq_init();
-	acpi_processor_ppc_init();
+	if (!cpufreq_register_notifier(&acpi_processor_notifier_block,
+				       CPUFREQ_POLICY_NOTIFIER)) {
+		acpi_processor_cpufreq_init = true;
+	}
+
 	acpi_processor_throttling_init();
 	return 0;
 err:
@@ -324,8 +356,12 @@ static void __exit acpi_processor_driver_exit(void)
 	if (acpi_disabled)
 		return;
 
-	acpi_processor_ppc_exit();
-	acpi_thermal_cpufreq_exit();
+	if (acpi_processor_cpufreq_init) {
+		cpufreq_unregister_notifier(&acpi_processor_notifier_block,
+					    CPUFREQ_POLICY_NOTIFIER);
+		acpi_processor_cpufreq_init = false;
+	}
+
 	cpuhp_remove_state_nocalls(hp_online);
 	cpuhp_remove_state_nocalls(CPUHP_ACPI_CPUDRV_DEAD);
 	driver_unregister(&acpi_processor_driver);
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index ee87cb6f6e59..1a22b2415a8b 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -50,57 +50,13 @@ module_param(ignore_ppc, int, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
 
-#define PPC_REGISTERED   1
-#define PPC_IN_USE       2
-
-static int acpi_processor_ppc_status;
-
-static int acpi_processor_ppc_notifier(struct notifier_block *nb,
-				       unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	struct acpi_processor *pr;
-	unsigned int ppc = 0;
-
-	if (ignore_ppc < 0)
-		ignore_ppc = 0;
-
-	if (ignore_ppc)
-		return 0;
-
-	if (event != CPUFREQ_ADJUST)
-		return 0;
-
-	mutex_lock(&performance_mutex);
-
-	pr = per_cpu(processors, policy->cpu);
-	if (!pr || !pr->performance)
-		goto out;
-
-	ppc = (unsigned int)pr->performance_platform_limit;
-
-	if (ppc >= pr->performance->state_count)
-		goto out;
-
-	cpufreq_verify_within_limits(policy, 0,
-				     pr->performance->states[ppc].
-				     core_frequency * 1000);
-
-      out:
-	mutex_unlock(&performance_mutex);
-
-	return 0;
-}
-
-static struct notifier_block acpi_ppc_notifier_block = {
-	.notifier_call = acpi_processor_ppc_notifier,
-};
+static int acpi_processor_ppc_in_use;
 
 static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 {
 	acpi_status status = 0;
 	unsigned long long ppc = 0;
-
+	int ret;
 
 	if (!pr)
 		return -EINVAL;
@@ -112,7 +68,7 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 	status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc);
 
 	if (status != AE_NOT_FOUND)
-		acpi_processor_ppc_status |= PPC_IN_USE;
+		acpi_processor_ppc_in_use = 1;
 
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC"));
@@ -124,6 +80,16 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 
 	pr->performance_platform_limit = (int)ppc;
 
+	if (ignore_ppc || ppc >= pr->performance->state_count)
+		return 0;
+
+	ret = dev_pm_qos_update_request(pr->perflib_req,
+			pr->performance->states[ppc].core_frequency * 1000);
+	if (ret) {
+		pr_warn("Failed to update perflib freq constraint: cpu%d (%d)\n",
+			pr->id, ret);
+	}
+
 	return 0;
 }
 
@@ -184,23 +150,39 @@ int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
 }
 EXPORT_SYMBOL(acpi_processor_get_bios_limit);
 
-void acpi_processor_ppc_init(void)
+void acpi_processor_ppc_init(struct cpufreq_policy *policy)
 {
-	if (!cpufreq_register_notifier
-	    (&acpi_ppc_notifier_block, CPUFREQ_POLICY_NOTIFIER))
-		acpi_processor_ppc_status |= PPC_REGISTERED;
-	else
-		printk(KERN_DEBUG
-		       "Warning: Processor Platform Limit not supported.\n");
+	struct acpi_processor *pr = per_cpu(processors, policy->cpu);
+	struct dev_pm_qos_request *req;
+	int ret;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return;
+
+	ret = dev_pm_qos_add_request(get_cpu_device(policy->cpu),
+				     req, DEV_PM_QOS_MAX_FREQUENCY,
+				     policy->cpuinfo.max_freq);
+	if (ret < 0) {
+		pr_err("Failed to add freq constraint for cpu%d (%d)\n",
+		       policy->cpu, ret);
+		kfree(req);
+		return;
+	}
+
+	pr->perflib_req = req;
+
+	if (ignore_ppc < 0)
+		ignore_ppc = 0;
 }
 
-void acpi_processor_ppc_exit(void)
+void acpi_processor_ppc_exit(struct cpufreq_policy *policy)
 {
-	if (acpi_processor_ppc_status & PPC_REGISTERED)
-		cpufreq_unregister_notifier(&acpi_ppc_notifier_block,
-					    CPUFREQ_POLICY_NOTIFIER);
+	struct acpi_processor *pr = per_cpu(processors, policy->cpu);
 
-	acpi_processor_ppc_status &= ~PPC_REGISTERED;
+	dev_pm_qos_remove_request(pr->perflib_req);
+	kfree(pr->perflib_req);
+	pr->perflib_req = NULL;
 }
 
 static int acpi_processor_get_performance_control(struct acpi_processor *pr)
@@ -477,7 +459,7 @@ int acpi_processor_notify_smm(struct module *calling_module)
 	static int is_done = 0;
 	int result;
 
-	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
+	if (!acpi_processor_cpufreq_init)
 		return -EBUSY;
 
 	if (!try_module_get(calling_module))
@@ -513,7 +495,7 @@ int acpi_processor_notify_smm(struct module *calling_module)
 	 * we can allow the cpufreq driver to be rmmod'ed. */
 	is_done = 1;
 
-	if (!(acpi_processor_ppc_status & PPC_IN_USE))
+	if (!acpi_processor_ppc_in_use)
 		module_put(calling_module);
 
 	return 0;
@@ -742,7 +724,7 @@ acpi_processor_register_performance(struct acpi_processor_performance
 {
 	struct acpi_processor *pr;
 
-	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
+	if (!acpi_processor_cpufreq_init)
 		return -EINVAL;
 
 	mutex_lock(&performance_mutex);
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 50fb0107375e..02407b33b874 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -35,7 +35,6 @@ ACPI_MODULE_NAME("processor_thermal");
 #define CPUFREQ_THERMAL_MAX_STEP 3
 
 static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg);
-static unsigned int acpi_thermal_cpufreq_is_init = 0;
 
 #define reduction_pctg(cpu) \
 	per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu))
@@ -61,35 +60,11 @@ static int phys_package_first_cpu(int cpu)
 static int cpu_has_cpufreq(unsigned int cpu)
 {
 	struct cpufreq_policy policy;
-	if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu))
+	if (!acpi_processor_cpufreq_init || cpufreq_get_policy(&policy, cpu))
 		return 0;
 	return 1;
 }
 
-static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb,
-					 unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	unsigned long max_freq = 0;
-
-	if (event != CPUFREQ_ADJUST)
-		goto out;
-
-	max_freq = (
-	    policy->cpuinfo.max_freq *
-	    (100 - reduction_pctg(policy->cpu) * 20)
-	) / 100;
-
-	cpufreq_verify_within_limits(policy, 0, max_freq);
-
-      out:
-	return 0;
-}
-
-static struct notifier_block acpi_thermal_cpufreq_notifier_block = {
-	.notifier_call = acpi_thermal_cpufreq_notifier,
-};
-
 static int cpufreq_get_max_state(unsigned int cpu)
 {
 	if (!cpu_has_cpufreq(cpu))
@@ -108,7 +83,9 @@ static int cpufreq_get_cur_state(unsigned int cpu)
 
 static int cpufreq_set_cur_state(unsigned int cpu, int state)
 {
-	int i;
+	struct acpi_processor *pr;
+	unsigned long max_freq;
+	int i, ret;
 
 	if (!cpu_has_cpufreq(cpu))
 		return 0;
@@ -121,33 +98,53 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
 	 * frequency.
 	 */
 	for_each_online_cpu(i) {
-		if (topology_physical_package_id(i) ==
+		if (topology_physical_package_id(i) !=
 		    topology_physical_package_id(cpu))
-			cpufreq_update_policy(i);
+			continue;
+
+		pr = per_cpu(processors, i);
+		max_freq = (pr->policy->cpuinfo.max_freq * (100 - reduction_pctg(i) * 20)) / 100;
+
+		ret = dev_pm_qos_update_request(pr->thermal_req, max_freq);
+		if (ret) {
+			pr_warn("Failed to update thermal freq constraint: cpu%d (%d)\n",
+				pr->id, ret);
+		}
 	}
 	return 0;
 }
 
-void acpi_thermal_cpufreq_init(void)
+void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int i;
+	struct acpi_processor *pr = per_cpu(processors, policy->cpu);
+	struct dev_pm_qos_request *req;
+	int ret;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return;
+
+	ret = dev_pm_qos_add_request(get_cpu_device(policy->cpu),
+				     req, DEV_PM_QOS_MAX_FREQUENCY,
+				     policy->cpuinfo.max_freq);
+	if (ret < 0) {
+		pr_err("Failed to add freq constraint for cpu%d (%d)\n",
+		       policy->cpu, ret);
+		kfree(req);
+		return;
+	}
 
-	i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block,
-				      CPUFREQ_POLICY_NOTIFIER);
-	if (!i)
-		acpi_thermal_cpufreq_is_init = 1;
+	pr->thermal_req = req;
 }
 
-void acpi_thermal_cpufreq_exit(void)
+void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy)
 {
-	if (acpi_thermal_cpufreq_is_init)
-		cpufreq_unregister_notifier
-		    (&acpi_thermal_cpufreq_notifier_block,
-		     CPUFREQ_POLICY_NOTIFIER);
+	struct acpi_processor *pr = per_cpu(processors, policy->cpu);
 
-	acpi_thermal_cpufreq_is_init = 0;
+	dev_pm_qos_remove_request(pr->thermal_req);
+	kfree(pr->thermal_req);
+	pr->thermal_req = NULL;
 }
-
 #else				/* ! CONFIG_CPU_FREQ */
 static int cpufreq_get_max_state(unsigned int cpu)
 {
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 1194a4c78d55..a1a7966bb755 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -4,6 +4,8 @@
 
 #include <linux/kernel.h>
 #include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/pm_qos.h>
 #include <linux/thermal.h>
 #include <asm/acpi.h>
 
@@ -230,6 +232,9 @@ struct acpi_processor {
 	struct acpi_processor_limit limit;
 	struct thermal_cooling_device *cdev;
 	struct device *dev; /* Processor device. */
+	struct cpufreq_policy *policy;
+	struct dev_pm_qos_request *perflib_req;
+	struct dev_pm_qos_request *thermal_req;
 };
 
 struct acpi_processor_errata {
@@ -296,16 +301,17 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
 /* in processor_perflib.c */
 
 #ifdef CONFIG_CPU_FREQ
-void acpi_processor_ppc_init(void);
-void acpi_processor_ppc_exit(void);
+extern bool acpi_processor_cpufreq_init;
+void acpi_processor_ppc_init(struct cpufreq_policy *policy);
+void acpi_processor_ppc_exit(struct cpufreq_policy *policy);
 void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag);
 extern int acpi_processor_get_bios_limit(int cpu, unsigned int *limit);
 #else
-static inline void acpi_processor_ppc_init(void)
+static inline void acpi_processor_ppc_init(struct cpufreq_policy *policy)
 {
 	return;
 }
-static inline void acpi_processor_ppc_exit(void)
+static inline void acpi_processor_ppc_exit(struct cpufreq_policy *policy)
 {
 	return;
 }
@@ -421,14 +427,14 @@ static inline int acpi_processor_hotplug(struct acpi_processor *pr)
 int acpi_processor_get_limit_info(struct acpi_processor *pr);
 extern const struct thermal_cooling_device_ops processor_cooling_ops;
 #if defined(CONFIG_ACPI_CPU_FREQ_PSS) & defined(CONFIG_CPU_FREQ)
-void acpi_thermal_cpufreq_init(void);
-void acpi_thermal_cpufreq_exit(void);
+void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy);
+void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy);
 #else
-static inline void acpi_thermal_cpufreq_init(void)
+static inline void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy)
 {
 	return;
 }
-static inline void acpi_thermal_cpufreq_exit(void)
+static inline void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	return;
 }
-- 
2.21.0.rc0.269.g1a574e7a288b

[PATCH 09/10] cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events

[Viresh Kumar]

No driver makes reference to these events now, remove them and the code
related to them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq.c | 36 +++++++-----------------------------
 include/linux/cpufreq.h   |  6 ++----
 2 files changed, 9 insertions(+), 33 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8a7eff2a3771..bd91091ed6b8 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2362,15 +2362,13 @@ EXPORT_SYMBOL(cpufreq_get_policy);
  * @policy: Policy object to modify.
  * @new_policy: New policy data.
  *
- * Pass @new_policy to the cpufreq driver's ->verify() callback, run the
- * installed policy notifiers for it with the CPUFREQ_ADJUST value, pass it to
- * the driver's ->verify() callback again and run the notifiers for it again
- * with the CPUFREQ_NOTIFY value.  Next, copy the min and max parameters
- * of @new_policy to @policy and either invoke the driver's ->setpolicy()
- * callback (if present) or carry out a governor update for @policy.  That is,
- * run the current governor's ->limits() callback (if the governor field in
- * @new_policy points to the same object as the one in @policy) or replace the
- * governor for @policy with the new one stored in @new_policy.
+ * Pass @new_policy to the cpufreq driver's ->verify() callback. Next, copy the
+ * min and max parameters of @new_policy to @policy and either invoke the
+ * driver's ->setpolicy() callback (if present) or carry out a governor update
+ * for @policy.  That is, run the current governor's ->limits() callback (if the
+ * governor field in @new_policy points to the same object as the one in
+ * @policy) or replace the governor for @policy with the new one stored in
+ * @new_policy.
  *
  * The cpuinfo part of @policy is not updated by this function.
  */
@@ -2398,26 +2396,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
 	if (ret)
 		return ret;
 
-	/*
-	 * The notifier-chain shall be removed once all the users of
-	 * CPUFREQ_ADJUST are moved to use the QoS framework.
-	 */
-	/* adjust if necessary - all reasons */
-	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
-			CPUFREQ_ADJUST, new_policy);
-
-	/*
-	 * verify the cpu speed can be set within this limit, which might be
-	 * different to the first one
-	 */
-	ret = cpufreq_driver->verify(new_policy);
-	if (ret)
-		return ret;
-
-	/* notification of the new policy */
-	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
-			CPUFREQ_NOTIFY, new_policy);
-
 	policy->min = new_policy->min;
 	policy->max = new_policy->max;
 	trace_cpu_frequency_limits(policy);
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index e28c8af697d2..cb1e86a14c7a 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -456,10 +456,8 @@ static inline void cpufreq_resume(void) {}
 #define CPUFREQ_POSTCHANGE		(1)
 
 /* Policy Notifiers  */
-#define CPUFREQ_ADJUST			(0)
-#define CPUFREQ_NOTIFY			(1)
-#define CPUFREQ_CREATE_POLICY		(2)
-#define CPUFREQ_REMOVE_POLICY		(3)
+#define CPUFREQ_CREATE_POLICY		(0)
+#define CPUFREQ_REMOVE_POLICY		(1)
 
 #ifdef CONFIG_CPU_FREQ
 int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
-- 
2.21.0.rc0.269.g1a574e7a288b

[PATCH 10/10] Documentation: cpufreq: Update policy notifier documentation

[Viresh Kumar]

Update documentation with the recent policy notifier updates.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 Documentation/cpu-freq/core.txt | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 073f128af5a7..af5c0d60b466 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt
@@ -57,19 +57,11 @@ transition notifiers.
 2.1 CPUFreq policy notifiers
 ----------------------------
 
-These are notified when a new policy is intended to be set. Each
-CPUFreq policy notifier is called twice for a policy transition:
+These are notified when a new policy is created or removed.
 
-1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
-    they see a need for this - may it be thermal considerations or
-    hardware limitations.
-
-2.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
-   - if two hardware drivers failed to agree on a new policy before this
-   stage, the incompatible hardware shall be shut down, and the user
-   informed of this.
-
-The phase is specified in the second argument to the notifier.
+The phase is specified in the second argument to the notifier.  The phase is
+CPUFREQ_CREATE_POLICY when the policy is first created and it is
+CPUFREQ_REMOVE_POLICY when the policy is removed.
 
 The third argument, a void *pointer, points to a struct cpufreq_policy
 consisting of several values, including min, max (the lower and upper
-- 
2.21.0.rc0.269.g1a574e7a288b