Re: [PATCH V2 RESEND 1/4] dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 29/02/2020 04:44, Anson Huang wrote:
> Add thermal binding doc for Freescale's i.MX8MM Thermal Monitoring Unit.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied 1/4 and 2/4.

Thanks


 ---
> No change.
> ---
>  .../devicetree/bindings/thermal/imx8mm-thermal.txt        | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
> 
> diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
> new file mode 100644
> index 0000000..d09ae82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
> @@ -0,0 +1,15 @@
> +* Thermal Monitoring Unit (TMU) on Freescale i.MX8MM SoC
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8mm-tmu".
> +- reg : Address range of TMU registers.
> +- clocks : TMU's clock source.
> +- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description.
> +
> +Example:
> +tmu: tmu@30260000 {
> +	compatible = "fsl,imx8mm-tmu";
> +	reg = <0x30260000 0x10000>;
> +	clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
> +	#thermal-sensor-cells = <0>;
> +};
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog