Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Matthias Kaehlcke <mka@chromium.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: "Kyungmin Park" <kyungmin.park@samsung.com>,
	"Artur Świgoń" <a.swigon@partner.samsung.com>,
	"Saravana Kannan" <saravanak@google.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"Georgi Djakov" <georgi.djakov@linaro.org>,
	"Abel Vesa" <abel.vesa@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Lukasz Luba" <l.luba@partner.samsung.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 0/8] PM / devfreq: Add dev_pm_qos support
Date: Wed,  2 Oct 2019 22:25:03 +0300
Message-ID: <cover.1570044052.git.leonard.crestez@nxp.com> (raw)

Add dev_pm_qos notifiers to devfreq core in order to support frequency
limits via dev_pm_qos_add_request.

Unlike the rest of devfreq the dev_pm_qos frequency is measured in Khz,
this is consistent with current dev_pm_qos usage for cpufreq and
allows frequencies above 2Ghz (pm_qos expresses limits as s32).

Like with cpufreq the handling of min_freq/max_freq is moved to the
dev_pm_qos mechanism. Constraints from userspace are no longer clamped on
store, instead all values can be written and we only check against OPPs in a
new devfreq_get_freq_range function. This is consistent with the design of
dev_pm_qos.

Notifiers from pm_qos are executed under a single global dev_pm_qos_mtx and
need to take devfreq->lock. Notifier registration takes the same dev_pm_qos_mtx
so in order to prevent lockdep warnings it must be done outside devfreq->lock.
Current devfreq_add_device does all initialization under devfreq->lock and that
needs to be relaxed.

Some of first patches in the series are bugfixes and cleanups, they could be
applied separately.

---
Changes since v8:
* Fix incorrectly reading qos max twice in get_freq_range.
* Make devfreq_notifier_call set scaling_max_freq to ULONG_MAX instead of 0 on
error. This avoids special-casing this in get_freq_range.
* Add a fix for devfreq_notifier_call returning -errno.
* Replace S32_MAX with PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE. This seems cleaner
and avoids overflow when multiplying S32_MAX with 1000 on 32bit platforms. It
overflowed to 0xfffffc18 hz so it was mostly safe anyway.
* Warn when encountering errors on cleanup (but continue).
* Incorporate other smaller comment and printk adjustments from review.
Link to v8:
https://patchwork.kernel.org/cover/11158383/

Changes since v7:
* Only #define HZ_PER_KHZ in patch where it's used.
* Drop devfreq_ prefix for some internal functions.
* Improve qos update error message.
* Remove some unnecessary comments.
* Collect reviews
Link to v7: https://patchwork.kernel.org/cover/11157649/

Changes since v6:
* Don't return errno from devfreq_qos_notifier_call, return NOTIFY_DONE
and print the error.
* More spelling and punctuation nits
Link to v6: https://patchwork.kernel.org/cover/11157201/

Changes since v5:
* Drop patches which are not strictly related to PM QoS.
* Add a comment explaining why devfreq_add_device needs two cleanup paths.
* Remove {} for single line.
* Rename {min,max}_freq_req to user_{min,max}_freq_req
* Collect reviews
Link to v5: https://patchwork.kernel.org/cover/11149497/

Changes since v4:
* Move more devfreq_add_device init ahead of device_register.
* Make devfreq_dev_release cleanup devices not yet in devfreq_list. This is
simpler than previous attempt to add to devfreq_list sonner.
* Take devfreq->lock in trans_stat_show
* Register dev_pm_opp notifier on devfreq parent dev (which has OPPs)
Link to v4: https://patchwork.kernel.org/cover/11114657/

Changes since v3:
* Cleanup locking and error-handling in devfreq_add_device
* Register notifiers after device registration but before governor start
* Keep the initialization of min_req/max_req ahead of device_register
because it's used for sysfs handling
* Use HZ_PER_KHZ instead of 1000
* Add kernel-doc comments
* Move OPP notifier to core
Link to v3: https://patchwork.kernel.org/cover/11104061/

Changes since v2:
* Handle sysfs via dev_pm_qos (in separate patch)
* Add locking to {min,max}_freq_show
* Fix checkpatch issues (long lines etc)
Link to v2: https://patchwork.kernel.org/patch/11084279/

Changes since v1:
* Add doxygen comments for min_nb/max_nb
* Remove notifiers on error/cleanup paths. Keep gotos simple by relying on
dev_pm_qos_remove_notifier ignoring notifiers which were not added.
Link to v1: https://patchwork.kernel.org/patch/11078475/

Leonard Crestez (8):
  PM / devfreq: Don't fail devfreq_dev_release if not in list
  PM / devfreq: Fix devfreq_notifier_call returning errno
  PM / devfreq: Set scaling_max_freq to max on OPP notifier error
  PM / devfreq: Move more initialization before registration
  PM / devfreq: Don't take lock in devfreq_add_device
  PM / devfreq: Introduce get_freq_range helper
  PM / devfreq: Add PM QoS support
  PM / devfreq: Use PM QoS for sysfs min/max_freq

 drivers/devfreq/devfreq.c | 310 ++++++++++++++++++++++++++------------
 include/linux/devfreq.h   |  14 +-
 2 files changed, 224 insertions(+), 100 deletions(-)

-- 
2.17.1


             reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-02 19:25 Leonard Crestez [this message]
2019-10-02 19:25 ` [PATCH v9 1/8] PM / devfreq: Don't fail devfreq_dev_release if not in list Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 2/8] PM / devfreq: Fix devfreq_notifier_call returning errno Leonard Crestez
2019-10-02 21:24   ` Matthias Kaehlcke
2019-10-02 23:47     ` Leonard Crestez
2019-10-31  2:29   ` Chanwoo Choi
2019-10-02 19:25 ` [PATCH v9 3/8] PM / devfreq: Set scaling_max_freq to max on OPP notifier error Leonard Crestez
2019-10-02 21:33   ` Matthias Kaehlcke
2019-10-31  2:21   ` Chanwoo Choi
2019-10-02 19:25 ` [PATCH v9 4/8] PM / devfreq: Move more initialization before registration Leonard Crestez
2019-10-31  3:15   ` Chanwoo Choi
2019-10-31 13:31     ` Leonard Crestez
2019-11-01  8:31       ` Chanwoo Choi
2019-11-01 14:36         ` Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 5/8] PM / devfreq: Don't take lock in devfreq_add_device Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 6/8] PM / devfreq: Introduce get_freq_range helper Leonard Crestez
2019-10-03 18:19   ` Matthias Kaehlcke
2019-10-03 19:16     ` Leonard Crestez
2019-10-03 19:36       ` Matthias Kaehlcke
2019-10-11 18:29     ` Matthias Kaehlcke
2019-10-31  2:44       ` Chanwoo Choi
2019-10-31  2:42   ` Chanwoo Choi
2019-10-31 13:12     ` Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 7/8] PM / devfreq: Add PM QoS support Leonard Crestez
2019-10-02 22:22   ` Matthias Kaehlcke
2019-10-04 17:04   ` Matthias Kaehlcke
2019-10-31  3:01   ` Chanwoo Choi
2019-10-31 13:21     ` Leonard Crestez
2019-10-02 19:25 ` [PATCH v9 8/8] PM / devfreq: Use PM QoS for sysfs min/max_freq Leonard Crestez
2019-10-04 17:05   ` Matthias Kaehlcke
2019-10-31  3:10   ` Chanwoo Choi
2019-10-23 14:06 ` [PATCH v9 0/8] PM / devfreq: Add dev_pm_qos support Leonard Crestez
2019-10-23 16:34   ` Matthias Kaehlcke
2019-10-24 16:21     ` Leonard Crestez

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1570044052.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=a.swigon@partner.samsung.com \
    --cc=abailon@baylibre.com \
    --cc=abel.vesa@nxp.com \
    --cc=cw00.choi@samsung.com \
    --cc=georgi.djakov@linaro.org \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=l.luba@partner.samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=ping.bai@nxp.com \
    --cc=saravanak@google.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git