Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
From: Maulik Shah <mkshah@codeaurora.org>
To: Stephen Boyd <swboyd@chromium.org>,
	agross@kernel.org, david.brown@linaro.org,
	linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	bjorn.andersson@linaro.org, evgreen@chromium.org,
	dianders@chromium.org, rnayak@codeaurora.org,
	ilina@codeaurora.org, lsrao@codeaurora.org,
	ulf.hansson@linaro.org
Subject: Re: [PATCH v2 4/6] drivers: qcom: rpmh-rsc: Add RSC power domain support
Date: Mon, 3 Feb 2020 18:41:27 +0530
Message-ID: <d6ec3b9e-ed3c-3b6d-f313-1c5acbc786d1@codeaurora.org> (raw)
In-Reply-To: <5d7146be.1c69fb81.38760.7fb8@mx.google.com>


On 9/5/2019 11:02 PM, Stephen Boyd wrote:
> Quoting Maulik Shah (2019-08-23 01:17:01)
>> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
>> index e278fc11fe5c..884b39599e8f 100644
>> --- a/drivers/soc/qcom/rpmh-rsc.c
>> +++ b/drivers/soc/qcom/rpmh-rsc.c
>> @@ -498,6 +498,32 @@ static int tcs_ctrl_write(struct rsc_drv *drv, const struct tcs_request *msg)
>>          return ret;
>>   }
>>   
>> +/**
>> + *  rpmh_rsc_ctrlr_is_idle: Check if any of the AMCs are busy.
>> + *
>> + *  @drv: The controller
>> + *
>> + *  Returns false if the TCSes are engaged in handling requests,
> Please use kernel-doc style for returns here.
Done.
>> + *  True if controller is idle.
>> + */
>> +static bool rpmh_rsc_ctrlr_is_idle(struct rsc_drv *drv)
>> +{
>> +       int m;
>> +       struct tcs_group *tcs = get_tcs_of_type(drv, ACTIVE_TCS);
>> +       bool ret = true;
>> +
>> +       spin_lock(&drv->lock);
> I think these need to be irqsave/restore still.
Done.
>> +       for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
>> +               if (!tcs_is_free(drv, m)) {
> This snippet is from tcs_invalidate(). Please collapse it into some sort
> of function or macro like for_each_tcs().
Keeping it as it is, the snippet is actually little different from 
tcs_invalidate.
>> +                       ret = false;
>> +                       break;
>> +               }
>> +       }
>> +       spin_unlock(&drv->lock);
>> +
>> +       return ret;
>> +}
>> +
>>   /**
>>    * rpmh_rsc_write_ctrl_data: Write request to the controller
>>    *
>> @@ -521,6 +547,53 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
>>          return tcs_ctrl_write(drv, msg);
>>   }
>>   
>> +static int rpmh_domain_power_off(struct generic_pm_domain *rsc_pd)
>> +{
>> +       struct rsc_drv *drv = container_of(rsc_pd, struct rsc_drv, rsc_pd);
>> +
>> +       /*
>> +        * RPMh domain can not be powered off when there is pending ACK for
>> +        * ACTIVE_TCS request. Exit when controller is busy.
>> +        */
>> +
> Nitpick: Remove this extra newline.
Done.
>> +       if (!rpmh_rsc_ctrlr_is_idle(drv))
>> +               return -EBUSY;
>> +
>> +       return rpmh_flush(&drv->client);
>> +}
>> +
>> +static int rpmh_probe_power_domain(struct platform_device *pdev,
>> +                                  struct rsc_drv *drv)
>> +{
>> +       int ret;
>> +       struct generic_pm_domain *rsc_pd = &drv->rsc_pd;
>> +       struct device_node *dn = pdev->dev.of_node;
>> +
>> +       rsc_pd->name = kasprintf(GFP_KERNEL, "%s", dn->name);
> Maybe use devm_kasprintf?
Done.
>> +       if (!rsc_pd->name)
>> +               return -ENOMEM;
>> +
>> +       rsc_pd->name = kbasename(rsc_pd->name);
>> +       rsc_pd->power_off = rpmh_domain_power_off;
>> +       rsc_pd->flags |= GENPD_FLAG_IRQ_SAFE;
>> +
>> +       ret = pm_genpd_init(rsc_pd, NULL, false);
>> +       if (ret)
>> +               goto free_name;
>> +
>> +       ret = of_genpd_add_provider_simple(dn, rsc_pd);
>> +       if (ret)
>> +               goto remove_pd;
>> +
>> +       return ret;
>> +
>> +remove_pd:
>> +       pm_genpd_remove(rsc_pd);
>> +free_name:
>> +       kfree(rsc_pd->name);
> And then drop this one?
Done.
>> +       return ret;
>> +}
>> +
>>   static int rpmh_probe_tcs_config(struct platform_device *pdev,
>>                                   struct rsc_drv *drv)
>>   {
>> @@ -650,6 +723,17 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
>>          if (ret)
>>                  return ret;
>>   
>> +       /*
>> +        * Power domain is not required for controllers that support 'solver'
>> +        * mode where they can be in autonomous mode executing low power mode
>> +        * to power down.
>> +        */
>> +       if (of_property_read_bool(dn, "#power-domain-cells")) {
>> +               ret = rpmh_probe_power_domain(pdev, drv);
>> +               if (ret)
>> +                       return ret;
>> +       }
>> +
>>          spin_lock_init(&drv->lock);
>>          bitmap_zero(drv->tcs_in_use, MAX_TCS_NR);
> What happens if it fails later on? The genpd provider is still sitting
> around and needs to be removed on probe failure later on in this
> function. It would be nicer if there wasn't another function to probe
> the power domain and it was just inlined here actually. That way we
> don't have to wonder about what's going on across two blocks of code.

Thanks for pointing this.  Moved it at the end of probe to avoid this.

>
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  8:16 [PATCH v2 0/6] " Maulik Shah
2019-08-23  8:16 ` [PATCH v2 1/6] drivers: qcom: rpmh: fix macro to accept NULL argument Maulik Shah
2019-08-23  8:16 ` [PATCH v2 2/6] drivers: qcom: rpmh: remove rpmh_flush export Maulik Shah
2019-08-23  8:17 ` [PATCH v2 3/6] dt-bindings: soc: qcom: Add RSC power domain specifier Maulik Shah
2019-08-27 22:32   ` Rob Herring
2019-09-03  8:44     ` Maulik Shah
2019-08-23  8:17 ` [PATCH v2 4/6] drivers: qcom: rpmh-rsc: Add RSC power domain support Maulik Shah
2019-09-05 17:32   ` Stephen Boyd
2020-02-03 13:11     ` Maulik Shah [this message]
2019-08-23  8:17 ` [PATCH v2 5/6] arm64: dts: Convert to the hierarchical CPU topology layout for sdm845 Maulik Shah
2019-08-23  8:17 ` [PATCH v2 6/6] arm64: dts: Add rsc power domain " Maulik Shah
2019-09-05 17:33   ` Stephen Boyd
2020-01-21 19:05 ` [PATCH v2 0/6] Add RSC power domain support Matthias Kaehlcke
2020-01-25 15:36   ` Maulik Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d6ec3b9e-ed3c-3b6d-f313-1c5acbc786d1@codeaurora.org \
    --to=mkshah@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lsrao@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org
	public-inbox-index linux-pm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git