Re: [PATCH v1 06/11] thermal/drivers/ti: Use fixed update interval

["J, KEERTHY" <j-keerthy@ti.com>]

On 3/7/2023 7:07 PM, Daniel Lezcano wrote:
> Currently the TI thermal driver sets the sensor update interval based
> on the polling of the thermal zone. In order to get the polling rate,
> the code inspects the thermal zone device strcuture internals, thus
> breaking the self-encapsulation of the thermal framework core
> framework.
> 
> On the other side, we see the common polling rates set in the device
> tree for the platforms using this driver are 500 or 1000 ms.
> 
> Setting the polling rate to 250 ms would be far enough to cover the
> combination we found in the device tree.
> 
> Instead of accessing the thermal zone device structure polling rate,
> let's use a common update interval of 250 ms for the driver.

Thanks for the patch.

Acked-by: Keerthy <j-keerthy@ti.com>

> 
> Cc: Keerthy <j-keerthy@ti.com>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>   drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> index 0c8914017c18..430c4b43151f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> @@ -23,6 +23,8 @@
>   #include "ti-bandgap.h"
>   #include "../thermal_hwmon.h"
>   
> +#define TI_BANDGAP_UPDATE_INTERVAL_MS 250
> +
>   /* common data structures */
>   struct ti_thermal_data {
>   	struct cpufreq_policy *policy;
> @@ -159,7 +161,6 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
>   			     char *domain)
>   {
>   	struct ti_thermal_data *data;
> -	int interval;
>   
>   	data = ti_bandgap_get_sensor_data(bgp, id);
>   
> @@ -177,10 +178,9 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
>   		return PTR_ERR(data->ti_thermal);
>   	}
>   
> -	interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
> -
>   	ti_bandgap_set_sensor_data(bgp, id, data);
> -	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
> +	ti_bandgap_write_update_interval(bgp, data->sensor_id,
> +					 TI_BANDGAP_UPDATE_INTERVAL_MS);
>   
>   	if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
>   		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");