From mboxrd@z Thu Jan 1 00:00:00 1970 From: Woody Wu Date: Fri, 17 Mar 2017 05:50:40 +0000 Subject: Re: Setup pppd over rs-485 point-to-point Message-Id: <3b965c94-56ff-15b3-79bd-fed774b03cc0@gmail.com> List-Id: References: <2d19b2f1-bb0f-9a09-6d40-f05388c66af5@gmail.com> In-Reply-To: <2d19b2f1-bb0f-9a09-6d40-f05388c66af5@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ppp@vger.kernel.org On 03/17/2017 01:37 PM, Mike O'Connor wrote: > Hi Woody >> One of the search result is this: >> "http://linux-ppp.vger.kernel.narkive.com/Xcw4wgUF/ppp-over-rs-485", >> in which Karthik mentioned he has success with the rs-485 point to >> point connect although he still has problem with multi-drop bus. To >> me, I only has interests in point-to-point and hope there exits a >> solution. >> >> -woody >> > Reading that post, its clear to me that the original poster was probably > not actually able to use rs485. IE he had made a mistake in testing. > > Its just not going to work. > > Mike > Well... it looks like there is no solution. It's bad to me, but thank you anyway! -Woody