From mboxrd@z Thu Jan 1 00:00:00 1970 From: walter harms Date: Sun, 05 May 2019 18:40:30 +0000 Subject: Re: PPPOE on Arm Message-Id: <5CCF2E1E.1000508@bfs.de> List-Id: References: <5CCF1A2D.30808@bfs.de> In-Reply-To: <5CCF1A2D.30808@bfs.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ppp@vger.kernel.org Am 05.05.2019 19:57, schrieb Marco d'Itri: > On May 05, walter harms wrote: > >> I was using PPPOE on a raspi and it terminated with "invalid value", > Which raspi model and which distribution, exactly? > raspi3 with raspian (it was for testing, only) I tried also different kernels but no success. >> while the same setup on x86_64 worked fine. > Is your pppd configuration unusual in any way? > not really, but i need a VLAN (eth0.7) this is the line i used for testing, it includes everything. /usr/bin/setsid /usr/sbin/pppd pty '/usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth0.7 -T 80 -U -m 1412' noipdefault noauth default-asyncmap defaultroute hide-password nodetach mtu 1492 mru 1492 noaccomp nodeflate nopcomp novj novjccomp user xxxxx lcp-echo-interval 20 lcp-echo-failure 3 >> is anyone working with PPPOE ? > I use pppd and the PPPoE plugin from Debian 9 on a 32 bit armv7l system > (i.e. armhf) and it works fine. >