* [PATCH] add ipv6-{up,down}-script options
@ 2021-11-14 19:51 Daniel Barlow
0 siblings, 0 replies; only message in thread
From: Daniel Barlow @ 2021-11-14 19:51 UTC (permalink / raw)
To: linux-ppp
These allow a user to specify the paths to the scripts
usually located at /etc/ppp/ipv6-up and /etc/ppp/ipv6-down,
similarly to the existing ip-up-script and ip-down-script
options
Signed-off-by: Daniel Barlow <dan@telent.net>
---
NEWS | 7 +++++++
pppd/ipv6cp.c | 8 ++++----
pppd/main.c | 4 ++++
pppd/options.c | 14 ++++++++++++++
pppd/pppd.h | 5 +++++
5 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/NEWS b/NEWS
index 9d6c7fb..53a5e1a 100644
--- a/NEWS
+++ b/NEWS
@@ -1,3 +1,10 @@
+What's new since ppp-2.4.9 (unreleased)
+***************************************
+
+* New pppd options:
+ - ipv6-up-script
+ - ipv6-down-script
+
What's new in ppp-2.4.9.
************************
diff --git a/pppd/ipv6cp.c b/pppd/ipv6cp.c
index 8ab440a..cef1e38 100644
--- a/pppd/ipv6cp.c
+++ b/pppd/ipv6cp.c
@@ -1322,7 +1322,7 @@ ipv6cp_up(fsm *f)
*/
if (ipv6cp_script_state == s_down && ipv6cp_script_pid == 0) {
ipv6cp_script_state = s_up;
- ipv6cp_script(_PATH_IPV6UP);
+ ipv6cp_script(path_ipv6up);
}
}
@@ -1373,7 +1373,7 @@ ipv6cp_down(fsm *f)
/* Execute the ipv6-down script */
if (ipv6cp_script_state == s_up && ipv6cp_script_pid == 0) {
ipv6cp_script_state = s_down;
- ipv6cp_script(_PATH_IPV6DOWN);
+ ipv6cp_script(path_ipv6down);
}
}
@@ -1411,13 +1411,13 @@ ipv6cp_script_done(void *arg)
case s_up:
if (ipv6cp_fsm[0].state != OPENED) {
ipv6cp_script_state = s_down;
- ipv6cp_script(_PATH_IPV6DOWN);
+ ipv6cp_script(path_ipv6down);
}
break;
case s_down:
if (ipv6cp_fsm[0].state == OPENED) {
ipv6cp_script_state = s_up;
- ipv6cp_script(_PATH_IPV6UP);
+ ipv6cp_script(path_ipv6up);
}
break;
}
diff --git a/pppd/main.c b/pppd/main.c
index b1ac8b4..bdc6faa 100644
--- a/pppd/main.c
+++ b/pppd/main.c
@@ -300,6 +300,10 @@ main(int argc, char *argv[])
strlcpy(path_ipup, _PATH_IPUP, sizeof(path_ipup));
strlcpy(path_ipdown, _PATH_IPDOWN, sizeof(path_ipdown));
+#ifdef INET6
+ strlcpy(path_ipv6up, _PATH_IPV6UP, sizeof(path_ipv6up));
+ strlcpy(path_ipv6down, _PATH_IPV6DOWN, sizeof(path_ipv6down));
+#endif
link_stats_valid = 0;
new_phase(PHASE_INITIALIZE);
diff --git a/pppd/options.c b/pppd/options.c
index f3f5e25..c959283 100644
--- a/pppd/options.c
+++ b/pppd/options.c
@@ -131,6 +131,11 @@ int child_wait = 5; /* # seconds to wait for children at exit */
struct userenv *userenv_list; /* user environment variables */
int dfl_route_metric = -1; /* metric of the default route to set over the PPP link */
+#ifdef INET6
+char path_ipv6up[MAXPATHLEN]; /* pathname of ipv6-up script */
+char path_ipv6down[MAXPATHLEN]; /* pathname of ipv6-down script */
+#endif
+
#ifdef MAXOCTETS
unsigned int maxoctets = 0; /* default - no limit */
int maxoctets_dir = 0; /* default - sum of traffic */
@@ -328,6 +333,15 @@ option_t general_options[] = {
"Set pathname of ip-down script",
OPT_PRIV|OPT_STATIC, NULL, MAXPATHLEN },
+#ifdef INET6
+ { "ipv6-up-script", o_string, path_ipv6up,
+ "Set pathname of ipv6-up script",
+ OPT_PRIV|OPT_STATIC, NULL, MAXPATHLEN },
+ { "ipv6-down-script", o_string, path_ipv6down,
+ "Set pathname of ipv6-down script",
+ OPT_PRIV|OPT_STATIC, NULL, MAXPATHLEN },
+#endif
+
#ifdef HAVE_MULTILINK
{ "multilink", o_bool, &multilink,
"Enable multilink operation", OPT_PRIO | 1 },
diff --git a/pppd/pppd.h b/pppd/pppd.h
index ab8f674..ce43a28 100644
--- a/pppd/pppd.h
+++ b/pppd/pppd.h
@@ -336,6 +336,11 @@ extern bool dump_options; /* print out option values */
extern bool dryrun; /* check everything, print options, exit */
extern int child_wait; /* # seconds to wait for children at end */
+#ifdef INET6
+extern char path_ipv6up[MAXPATHLEN]; /* pathname of ipv6-up script */
+extern char path_ipv6down[MAXPATHLEN]; /* pathname of ipv6-down script */
+#endif
+
#if defined(USE_EAPTLS) || defined(USE_PEAP)
#define TLS_VERIFY_NONE "none"
--
2.31.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-11-15 23:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-14 19:51 [PATCH] add ipv6-{up,down}-script options Daniel Barlow
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).