From: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: "Thierry Reding"
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Lee Jones" <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Kukjin Kim" <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Krzysztof Kozlowski"
<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Bartlomiej Zolnierkiewicz
<b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Sylwester Nawrocki
<snawrocki-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Alim Akhtar <alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Pankaj Dubey
<pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: [PATCH v2 7/8] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
Date: Thu, 2 Jul 2020 17:51:48 +0200 [thread overview]
Message-ID: <20200702155149.12854-7-krzk@kernel.org> (raw)
In-Reply-To: <20200702155149.12854-1-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Remove the regulators node and define fixed regulators directly under
the root node. This makes Exynos5250 Arndale board consistent with
other Exynos boards.
Suggested-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos5250-arndale.dts | 92 +++++++++++-------------
1 file changed, 43 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c4cc7611898c..7ccb3814bab6 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -84,60 +84,54 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- main_dc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "MAIN_DC";
- regulator-always-on;
- };
+ main_dc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "MAIN_DC";
+ regulator-always-on;
+ };
- mmc_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "VDD_MMC";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
+ mmc_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "VDD_MMC";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
- reg_hdmi_en: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdmi-en";
- regulator-always-on;
- };
+ reg_hdmi_en: regulator-2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdmi-en";
+ regulator-always-on;
+ };
- vcc_1v2_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "VCC_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
+ vcc_1v2_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- vcc_1v8_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vcc_1v8_reg: regulator-4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- vcc_3v3_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ vcc_3v3_reg: regulator-5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
--
2.17.1
next prev parent reply other threads:[~2020-07-02 15:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 15:51 [PATCH v2 1/8] dt-bindings: pwm: samsung: Do not require interrupts on Exynos SoCs Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 3/8] arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible Krzysztof Kozlowski
[not found] ` <20200702155149.12854-3-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-07-03 17:17 ` Alim Akhtar
2020-07-03 18:01 ` Krzysztof Kozlowski
[not found] ` <20200702155149.12854-1-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-07-02 15:51 ` [PATCH v2 2/8] arm64: dts: exynos: Describe PWM interrupts on Exynos7 Krzysztof Kozlowski
[not found] ` <20200702155149.12854-2-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-07-03 17:10 ` Alim Akhtar
2020-07-03 18:01 ` Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 4/8] arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Krzysztof Kozlowski
[not found] ` <20200702155149.12854-4-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-07-03 17:23 ` Alim Akhtar
2020-07-07 6:44 ` Krzysztof Kozlowski
2020-07-02 15:51 ` Krzysztof Kozlowski [this message]
2020-07-02 15:51 ` [PATCH v2 8/8] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 5/8] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings Krzysztof Kozlowski
2020-07-02 20:34 ` Marek Szyprowski
2020-07-05 18:13 ` Krzysztof Kozlowski
2020-07-02 15:51 ` [PATCH v2 6/8] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen Krzysztof Kozlowski
2020-07-06 9:41 ` [PATCH v2 1/8] dt-bindings: pwm: samsung: Do not require interrupts on Exynos SoCs Uwe Kleine-König
[not found] ` <20200706094157.kyag7p5df3vo54wx-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2020-07-07 18:50 ` Krzysztof Kozlowski
2020-07-14 2:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200702155149.12854-7-krzk@kernel.org \
--to=krzk-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=pankaj.dubey-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=snawrocki-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).