Linux-PWM Archive on lore.kernel.org
 help / color / Atom feed
From: Michael Walle <michael@walle.cc>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Wim Van Sebroeck" <wim@linux-watchdog.org>,
	"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Marc Zyngier" <maz@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Michael Walle" <michael@walle.cc>
Subject: [PATCH v5 05/13] irqchip: add sl28cpld interrupt controller support
Date: Mon,  6 Jul 2020 19:53:45 +0200
Message-ID: <20200706175353.16404-6-michael@walle.cc> (raw)
In-Reply-To: <20200706175353.16404-1-michael@walle.cc>

Add support for the interrupt controller inside the sl28 CPLD management
controller.

The interrupt controller can handle at most 8 interrupts and is really
simplistic and consists only of an interrupt mask and an interrupt
pending register.

Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v4:
 - update copyright year
 - don't use "int irq" instead of "unsigne int irq", because
   platform_get_irq() might return a negative error code. Found by "kernel
   test robot <lkp@intel.com>
 - remove comma in terminator line of the compatible strings list,
   suggested by Andy
 - use newer devm_regmap_add_irq_chip_fwnode()
 - don't use KBUID_MODNAME, suggested by Andy
 - remove the platform device table

Changes since v3:
 - see cover letter

 drivers/irqchip/Kconfig        |  8 +++
 drivers/irqchip/Makefile       |  1 +
 drivers/irqchip/irq-sl28cpld.c | 96 ++++++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 drivers/irqchip/irq-sl28cpld.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 216b3b8392b5..b23d23eed3a5 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -246,6 +246,14 @@ config RENESAS_RZA1_IRQC
 	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
 	  to 8 external interrupts with configurable sense select.
 
+config SL28CPLD_INTC
+	bool "Kontron sl28cpld IRQ controller"
+	select MFD_SIMPLE_MFD_I2C
+	select REGMAP_IRQ
+	help
+	  Interrupt controller driver for the board management controller
+	  found on the Kontron sl28 CPLD.
+
 config ST_IRQCHIP
 	bool
 	select REGMAP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 133f9c45744a..39af7d89204d 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -111,3 +111,4 @@ obj-$(CONFIG_LOONGSON_HTPIC)		+= irq-loongson-htpic.o
 obj-$(CONFIG_LOONGSON_HTVEC)		+= irq-loongson-htvec.o
 obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-loongson-pch-pic.o
 obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
+obj-$(CONFIG_SL28CPLD_INTC)		+= irq-sl28cpld.o
diff --git a/drivers/irqchip/irq-sl28cpld.c b/drivers/irqchip/irq-sl28cpld.c
new file mode 100644
index 000000000000..0aa50d025ef6
--- /dev/null
+++ b/drivers/irqchip/irq-sl28cpld.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld interrupt controller driver
+ *
+ * Copyright 2020 Kontron Europe GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define INTC_IE 0x00
+#define INTC_IP 0x01
+
+static const struct regmap_irq sl28cpld_irqs[] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+struct sl28cpld_intc {
+	struct regmap *regmap;
+	struct regmap_irq_chip chip;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+static int sl28cpld_intc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sl28cpld_intc *irqchip;
+	int irq;
+	u32 base;
+	int ret;
+
+	if (!dev->parent)
+		return -ENODEV;
+
+	irqchip = devm_kzalloc(dev, sizeof(*irqchip), GFP_KERNEL);
+	if (!irqchip)
+		return -ENOMEM;
+
+	irqchip->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!irqchip->regmap)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &base);
+	if (ret)
+		return -EINVAL;
+
+	irqchip->chip.name = "sl28cpld-intc";
+	irqchip->chip.irqs = sl28cpld_irqs;
+	irqchip->chip.num_irqs = ARRAY_SIZE(sl28cpld_irqs);
+	irqchip->chip.num_regs = 1;
+	irqchip->chip.status_base = base + INTC_IP;
+	irqchip->chip.mask_base = base + INTC_IE;
+	irqchip->chip.mask_invert = true,
+	irqchip->chip.ack_base = base + INTC_IP;
+
+	return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
+					       irqchip->regmap, irq,
+					       IRQF_SHARED | IRQF_ONESHOT, 0,
+					       &irqchip->chip,
+					       &irqchip->irq_data);
+}
+
+static const struct of_device_id sl28cpld_intc_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-intc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_intc_of_match);
+
+static struct platform_driver sl28cpld_intc_driver = {
+	.probe = sl28cpld_intc_probe,
+	.driver = {
+		.name = "sl28cpld-intc",
+		.of_match_table = sl28cpld_intc_of_match,
+	}
+};
+module_platform_driver(sl28cpld_intc_driver);
+
+MODULE_DESCRIPTION("sl28cpld Interrupt Controller Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
-- 
2.20.1

  parent reply index

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06 17:53 [PATCH v5 00/13] Add support for Kontron sl28cpld Michael Walle
2020-07-06 17:53 ` [PATCH v5 01/13] regmap-irq: use fwnode instead of device node in add_irq_chip() Michael Walle
2020-07-08 10:22   ` Mark Brown
     [not found] ` <20200706175353.16404-1-michael-QKn5cuLxLXY@public.gmane.org>
2020-07-06 17:53   ` [PATCH v5 02/13] mfd: add simple regmap based I2C driver Michael Walle
     [not found]     ` <20200706175353.16404-3-michael-QKn5cuLxLXY@public.gmane.org>
2020-07-17  9:04       ` Lee Jones
2020-07-19 22:25         ` Michael Walle
2020-07-17  9:06     ` Lee Jones
2020-07-19 22:31       ` Michael Walle
2020-07-20  7:43         ` Lee Jones
2020-07-06 17:53   ` [PATCH v5 06/13] watchdog: add support for sl28cpld watchdog Michael Walle
2020-07-06 17:53   ` [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-07-17  8:36     ` Pavel Machek
2020-07-17 21:54       ` Michael Walle
2020-07-06 17:53 ` [PATCH v5 03/13] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle
2020-07-13 16:04   ` Rob Herring
2020-07-06 17:53 ` [PATCH v5 04/13] mfd: simple-mfd-i2c: add sl28cpld support Michael Walle
2020-07-06 17:53 ` Michael Walle [this message]
2020-07-08  9:37   ` [PATCH v5 05/13] irqchip: add sl28cpld interrupt controller support Marc Zyngier
2020-07-06 17:53 ` [PATCH v5 07/13] pwm: add support for sl28cpld PWM controller Michael Walle
2020-07-09  8:50   ` Uwe Kleine-König
     [not found]     ` <20200709085006.b54ype3p4yu64upl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2020-07-11 17:28       ` Michael Walle
2020-07-13  8:47         ` Uwe Kleine-König
2020-07-14 11:31           ` Michael Walle
2020-07-14 16:08             ` Uwe Kleine-König
2020-07-14 21:09               ` Michael Walle
2020-07-15 16:36                 ` Uwe Kleine-König
2020-07-15 17:45                   ` Michael Walle
2020-07-15 18:18                     ` Uwe Kleine-König
2020-07-15 20:41                       ` Michael Walle
2020-07-16  6:10                         ` Uwe Kleine-König
2020-07-06 17:53 ` [PATCH v5 08/13] gpio: add support for the sl28cpld GPIO controller Michael Walle
     [not found]   ` <20200706175353.16404-9-michael-QKn5cuLxLXY@public.gmane.org>
2020-07-08  7:35     ` Linus Walleij
2020-07-17  0:25   ` kernel test robot
2020-07-06 17:53 ` [PATCH v5 09/13] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-07-06 17:53 ` [PATCH v5 10/13] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle
2020-07-06 17:53 ` [PATCH v5 11/13] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-07-06 17:53 ` [PATCH v5 13/13] arm64: dts: freescale: sl28: enable fan support Michael Walle
     [not found]   ` <20200706175353.16404-14-michael-QKn5cuLxLXY@public.gmane.org>
2020-07-08  7:39     ` Linus Walleij
     [not found]       ` <CACRpkdaPO7CGNrxmjL5QH1cxP5wqku1oMtQaQgJfeKiKqiGAOg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-07-08  7:56         ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706175353.16404-6-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jason@lakedaemon.net \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PWM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pwm/0 linux-pwm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pwm linux-pwm/ https://lore.kernel.org/linux-pwm \
		linux-pwm@vger.kernel.org
	public-inbox-index linux-pwm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pwm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git