From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: [PATCH v4 03/16] pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare() Date: Wed, 8 Jul 2020 23:14:19 +0200 Message-ID: <20200708211432.28612-4-hdegoede@redhat.com> References: <20200708211432.28612-1-hdegoede@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200708211432.28612-1-hdegoede@redhat.com> Sender: linux-acpi-owner@vger.kernel.org To: Thierry Reding , =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= , Jani Nikula , Joonas Lahtinen , Rodrigo Vivi , =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= , "Rafael J . Wysocki" , Len Brown Cc: Hans de Goede , linux-pwm@vger.kernel.org, intel-gfx , dri-devel@lists.freedesktop.org, Andy Shevchenko , Mika Westerberg , linux-acpi@vger.kernel.org List-Id: linux-pwm@vger.kernel.org According to the data-sheet the way the PWM controller works is that each input clock-cycle the base_unit gets added to a N bit counter and that counter overflowing determines the PWM output frequency. So assuming e.g. a 16 bit counter this means that if base_unit is set to 1, after 65535 input clock-cycles the counter has been increased from 0 to 65535 and it will overflow on the next cycle, so it will overflow after every 65536 clock cycles and thus the calculations done in pwm_lpss_prepare() should use 65536 and not 65535. This commit fixes this. Note this also aligns the calculations in pwm_lpss_prepare() with those in pwm_lpss_get_state(). Note this effectively reverts commit 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit"). The next patch in this series really fixes the potential overflow of the base_unit value. Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit") Reviewed-by: Andy Shevchenko Acked-by: Uwe Kleine-König Signed-off-by: Hans de Goede --- Changes in v3: - Add Fixes tag - Add Reviewed-by: Andy Shevchenko tag --- drivers/pwm/pwm-lpss.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c index 9d965ffe66d1..43b1fc634af1 100644 --- a/drivers/pwm/pwm-lpss.c +++ b/drivers/pwm/pwm-lpss.c @@ -93,7 +93,7 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm, * The equation is: * base_unit = round(base_unit_range * freq / c) */ - base_unit_range = BIT(lpwm->info->base_unit_bits) - 1; + base_unit_range = BIT(lpwm->info->base_unit_bits); freq *= base_unit_range; base_unit = DIV_ROUND_CLOSEST_ULL(freq, c); @@ -104,8 +104,8 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm, orig_ctrl = ctrl = pwm_lpss_read(pwm); ctrl &= ~PWM_ON_TIME_DIV_MASK; - ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT); - base_unit &= base_unit_range; + ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT); + base_unit &= (base_unit_range - 1); ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT; ctrl |= on_time_div; -- 2.26.2