From: Daniel Golle <daniel@makrotopia.org>
To: linux-pwm@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"John Crispin" <john@phrozen.org>
Subject: [PATCH v2 2/2] pwm: mediatek: Add support for MT7981
Date: Thu, 20 Apr 2023 13:36:23 +0100 [thread overview]
Message-ID: <7c6e31c844642c199f223f4229a04a37b57a34f3.1681992038.git.daniel@makrotopia.org> (raw)
In-Reply-To: <cover.1681992038.git.daniel@makrotopia.org>
The PWM unit on MT7981 uses different register offsets than previous
MediaTek PWM units. Add support for these new offsets and add support
for PWM on MT7981 which has 3 PWM channels, one of them is typically
used for a temperature controlled fan.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
Changes since v1:
* use pointer to reg_offset instead of u8 reg_ver and if-else
drivers/pwm/pwm-mediatek.c | 39 ++++++++++++++++++++++++++++++--------
1 file changed, 31 insertions(+), 8 deletions(-)
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 5b5eeaff35da6..7a51d210a8778 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -38,6 +38,7 @@ struct pwm_mediatek_of_data {
unsigned int num_pwms;
bool pwm45_fixup;
bool has_ck_26m_sel;
+ const unsigned int *reg_offset;
};
/**
@@ -59,10 +60,14 @@ struct pwm_mediatek_chip {
const struct pwm_mediatek_of_data *soc;
};
-static const unsigned int pwm_mediatek_reg_offset[] = {
+static const unsigned int mtk_pwm_reg_offset_v1[] = {
0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
};
+static const unsigned int mtk_pwm_reg_offset_v2[] = {
+ 0x0080, 0x00c0, 0x0100, 0x0140, 0x0180, 0x01c0, 0x0200, 0x0240
+};
+
static inline struct pwm_mediatek_chip *
to_pwm_mediatek_chip(struct pwm_chip *chip)
{
@@ -111,7 +116,7 @@ static inline void pwm_mediatek_writel(struct pwm_mediatek_chip *chip,
unsigned int num, unsigned int offset,
u32 value)
{
- writel(value, chip->regs + pwm_mediatek_reg_offset[num] + offset);
+ writel(value, chip->regs + chip->soc->reg_offset[num] + offset);
}
static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -285,60 +290,77 @@ static const struct pwm_mediatek_of_data mt2712_pwm_data = {
.num_pwms = 8,
.pwm45_fixup = false,
.has_ck_26m_sel = false,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct pwm_mediatek_of_data mt6795_pwm_data = {
.num_pwms = 7,
.pwm45_fixup = false,
.has_ck_26m_sel = false,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct pwm_mediatek_of_data mt7622_pwm_data = {
.num_pwms = 6,
.pwm45_fixup = false,
.has_ck_26m_sel = true,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct pwm_mediatek_of_data mt7623_pwm_data = {
.num_pwms = 5,
.pwm45_fixup = true,
.has_ck_26m_sel = false,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct pwm_mediatek_of_data mt7628_pwm_data = {
.num_pwms = 4,
.pwm45_fixup = true,
.has_ck_26m_sel = false,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct pwm_mediatek_of_data mt7629_pwm_data = {
.num_pwms = 1,
.pwm45_fixup = false,
.has_ck_26m_sel = false,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
-static const struct pwm_mediatek_of_data mt8183_pwm_data = {
- .num_pwms = 4,
+static const struct pwm_mediatek_of_data mt7981_pwm_data = {
+ .num_pwms = 3,
.pwm45_fixup = false,
.has_ck_26m_sel = true,
+ .reg_offset = mtk_pwm_reg_offset_v2,
};
-static const struct pwm_mediatek_of_data mt8365_pwm_data = {
- .num_pwms = 3,
+static const struct pwm_mediatek_of_data mt7986_pwm_data = {
+ .num_pwms = 2,
.pwm45_fixup = false,
.has_ck_26m_sel = true,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
-static const struct pwm_mediatek_of_data mt7986_pwm_data = {
- .num_pwms = 2,
+static const struct pwm_mediatek_of_data mt8183_pwm_data = {
+ .num_pwms = 4,
+ .pwm45_fixup = false,
+ .has_ck_26m_sel = true,
+ .reg_offset = mtk_pwm_reg_offset_v1,
+};
+
+static const struct pwm_mediatek_of_data mt8365_pwm_data = {
+ .num_pwms = 3,
.pwm45_fixup = false,
.has_ck_26m_sel = true,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct pwm_mediatek_of_data mt8516_pwm_data = {
.num_pwms = 5,
.pwm45_fixup = false,
.has_ck_26m_sel = true,
+ .reg_offset = mtk_pwm_reg_offset_v1,
};
static const struct of_device_id pwm_mediatek_of_match[] = {
@@ -348,6 +370,7 @@ static const struct of_device_id pwm_mediatek_of_match[] = {
{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
+ { .compatible = "mediatek,mt7981-pwm", .data = &mt7981_pwm_data },
{ .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data },
{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
{ .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },
--
2.40.0
next prev parent reply other threads:[~2023-04-20 12:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-20 12:35 [PATCH v2 0/2] Support PWM on MediaTek MT7981 Daniel Golle
2023-04-20 12:35 ` [PATCH v2 1/2] dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible Daniel Golle
2023-04-20 15:52 ` Krzysztof Kozlowski
2023-04-20 12:36 ` Daniel Golle [this message]
2023-04-20 14:32 ` [PATCH v2 2/2] pwm: mediatek: Add support for MT7981 AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7c6e31c844642c199f223f4229a04a37b57a34f3.1681992038.git.daniel@makrotopia.org \
--to=daniel@makrotopia.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).